All Activity

Oil fill is in rocker cover on top of motor tip box up easy to fill no funnel needed

I have a 2013 Hisun with a 686 Yamaha engine. I purchased it from an individual and it ran fine as long as the battery was full. I replaced the stator and now it will not start (run). It cranks fine, has fuel pressure, but will not fire up. I replaced the coil, no luck there. a technician told me that it was the wrong stator and wants a mint to replace it. the wires all plugged in when I installed the stator.

This mod is not for the fainthearted, as it requires some basic metal fabrication and welding skills. But the result is worth the effort IMO. I chose an aftermarket Honda Talon windshield based on economy, size, and construction (aluminum frame, DOT glass, folding, windshield). It fits OK, a little narrow at the top, and you need to incorporate the lower section of the original acrylic windshield and build some additional plates, but better than being too wide. If you are wondering why I attacked this mod, it's because mine is driven daily on the street. Tired of fading, scratchy, hazy plastic. Sucks in the rain; sucks at night. Now I can see.

Any new info on this problem?

Mine still occasionally makes noise. Not overly concerned at this point. Maybe time for you to see to see the dealer…

I did and no luck

Good luck on your search

It's always good to see how someone else chose to do it, but I disagree with the way he worded his reasoning for changing the onboard charger. Yes, you don't want to use the existing charging profile of the Delta-Q charger, but changing the profile is very easy if you have the right version file. It just requires a USB stick and the instructions and absolutely does not require removing it from the UTV. The manufacturer of the batteries I used (ReLion) sent me the files for the Delta-Q with a charging profile they had specifically made for them. No point in changing out a perfectly good (and already installed) charger if you don't have to. Others on this very long thread have used other profiles as well.

2018 Massimo 700 MSU. The machine started burning oil all of a sudden. One day fine-- next morning burning oil. Looking for advice. Do I pull the engine to inspect the top end or can it be done with the engine in place? Pro? Cons? Any and all assistance is greatly appreciated in advance. Chile

For those of you contemplating swapping out your batteries, I found this video on youtube. I like that he goes into how to remove various nuts-and-bolts to remove the old batteries.

I disagree, you don't get what you pay for.

Check your crankcase oil level, if it is too full then that means that your carburetor is leaking fuel into the engine when it is not running. Your carburetor is overflowing to fix that adjust your needle and seat so that the fuel flow stops when the carburetor bowl is full. The reason for gas being in the carburetor air box is that the crankcase breather is trying to re-leave pressure because the crankcase too full (gas and oil). Fix the carburetor problem and then change the oil.

Keep in mind, you get what you pay for. These are Chinese made machines so all parts required will be subject to new tariffs.

There's a big reason they want them gone..And that warranty ain't worth the paper it's written on.

Thanks Blair, I've tried this once before and will definitely try again. I may change the allocation size this time. I don't have the music USB with me at the moment... Thanks again... K&S

My older LM 650 is blowing fuel into the air cleaner. Any idea on what would cause this? It is the Suzuki motor. Not sure what model year it is. Thanks Subaru SxS.mp4

I have a 2018 Textron Stampede that has a leak on the passenger side rear end. Definitely looks like a gasket has gone bad, but I’m not sure what fluid I’m replacing?

Okay. Try this. Plug your USB drive into your PC or laptop. (no apple computers) Go to and click once on: "This PC" Then click on USB drive and choose "Format" (quick format option will do fine) After formatting, double click on USB drive to open it, it will be empty. Do not create any folder or anything on the USB drive. From the same PC/laptop, drag & drop a couple of mp3 tracks and try that. Do not just unplug the USB drive from your computer! Right click the USB drive and choose eject. Now you can unplug your USB drive. (just unplugging can corrupt your data) Hope That Does It!!! Blair

It's the fancy one that came with our Axis XS750. Attached is an image I found online, that looks just like ours. The file formats are .MP3. Thanks, K&S

Be sure to read the view & comments

What player are you using? I'll review and see if I can suggest anything.

Just changed my oil in my MSU 500..boy it was dirty..it's dusty ,very dusty here when it doesn't rain. Used Actevo 10w40 JASO M2 wet clutch oil..manual says 2 qts but it took 2 1/2 qts to get it where I feel comfortable..Some shops recommend 3 qts or more but I just can't see it..crank spinning in oil can't be. Good

Just an update. Still wouldn't recognize the music USB with modified extension cord. Light beside USB connector is on. K&S

If anyone is looking for the cheapest UTV, with dump bed, winch, roof and windshield, I just noticed that lowes has the axis 500/ hisun UTV on sale for 4500 (at least in my area) They are $4500. ($9000 original). I have one - they have some issues, but nothing catastrophic. My biggest complaint is that it is under powered. Also the winch failed. They are still selling an extended warranty - which I would take, just in case. My guess is lowes wants them gone.

Decided to do an oil change on the Massimo ...drained oil, screen was very clean even tho oil wasn't. Then went to remove old filter.. holy crap ..I tried every tool I have, could not budge it..Went to store and got one of the end cap type..fit nice and tight, put a 1/2 in drive ratchet on it..nope..not moving. Put a 18 on breaker bar o. It. The inside of the removal tool broke off!! Had to weld it back together. Put a pipe on the bar for more leverage. Finally broke it loose.. I have never seen a filter in my 55 yrs of working on engines so tight..And i was the one who put it on 2 yrs ago. JUST HAND TIGHT!