Outfitter-UT400-ShiftCable Adjustment

This is great info Cliff! could this be my problem? Just recently the Coleman 400 has been acting up. ( I should also point out it has only 13 hrs on it only ) it slips out of gear when starting out. Its worse when trying to go in reverse, there is a clunk and you heard it spin, its like it almost goes into gear then kicks out.  It seems to be less of an issue in 2wd and worse in 4wd, and if  the machine is under a load ....ex. in snow 4wd ,  it feels like it kicks out of gear and nothing happens.  I changed out the gear oil, which was low ( from the factory) and while it seems to be happier with the new oil , it still is acting up.  I was going to post the problem to see if anyone could help , when I saw  the file. I was actually looking at what they are showing, but wasn't sure what to do.  Could this be the reason?

13 hours is about where mine started doing the same thing. I had developed a similar  adjustment procedure using neutral as the reference. Tried this process last evening and it was very close to the setting my procedure came up with--been cold and rainy here today; haven't driven it yet...

The F/R shift mechanism is in the transmission, a  sliding dog collar on the counter shaft, in the crankcase. It is lubricated by engine oil and unrelated to the drive axles...

Okay  let’s hope it fixes the issue , will you let me know?