MULE2
By Travis
- 2,739 views
- View Travis's images
Flat stock is 48"x2"x1/8" cut down to the 40 7/8" and the short pieces are 13.5" it can be folded straight up or removed an 30 seconds or less.
Copyright
© 2021 Travis
Photo Information
-
Image Comments
-
Hi, fenders look great. Mine chipped out where a rock hit it. (right rear fender in the pic).
What material did you use and how did you form them?
Great to see Joyners still cruising.
Thanks,
Mark
-
-
-
Ever since I replaced the plastic engine cover with an expanded metal cover (See photo) I have not had any cooling issues on the motor. It is important to blow out the radiator after every trip as the passages on the radiator are very small and plug up very easily. I also changed the rear fenders to 3/16 polycarbonate and bent them so that the wheel could not hit them in the upswing.
-
if you are questioning that gray part it is an oil reed to drain oil back into the crankcase.
-
Recommended Comments
There are no comments to display.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.