Leaderboard

Hi, all, I am here to say i have found an excellent source for kawasaki parts, It's run by Eddie Babbit. It is called Kawasaki Partshouse. run by Babbits online, Muskegon Michigan. http://www.kawasakipartshouse.com/oemparts Just the other day i ordered piston rings, for my Mule 550, They got here and a Oil ring, and smaller ring were missing from the box, Kawasaki took responsibility for the "Accident" and I had also contacted babbits, and they replied and they said" keep the old rings, order a new set and you just pay shipping" so i got $30 piston rings for 8.95!!!? Free shipping on orders over $50!!!

Yes I have power just not turning over. Will do as advise by drinking all than I will give it a try. Thanks

Welcome! Pull the spark plug(s) and crank the engine to make sure you flush out any water from the combustion chamber. Hydrolocking as Alex mentioned can blow a headgasket, or worse, snap a connecting rod. Once you've made sure your combustion chamber is clear of water, you can replace the plugs . Also clean out the carb with some carb spray just in case any muck is in it, I would also replace the air filter if it got soaked too. And you will want to drain the oil in case any water got in the crankcase, and run oil through it (not engine running) just poor oil in let it sit for awhile and drain it. ONLY if the oil is a milky/grey color. You will also want to be sure no water got into the gas tank so dump it and wash it out real good. let it dry out in the sun and put fresh gas with a new filter on it. Alex summed everything up pretty good. I can't think of much else. What model mule do you have, that might help with others helping you too. I would also find a snorkel kit for it in case similar incidents occur in the future.