goindeep

yeah its for you! i will try to get it shipped to you in the next day or so....

hey bro i have an extra K&N filter that came off of one of rocmoc's joyners i can send you....

that has been my main issue. im sure i can speak for most of us when i say we have all had money issues or been covered up in bs.. i have learned that comunication comes first. facing the customer and telling them something they dont want to hear is better then nothing at all. and it would seem you are dealing with a great group of guys here that would be there and help you through thick and thin. when i had the issue of ordering a part and you were out of stock, i tried to get ahold of you and tell you to send me something else instead to try and help you out, but you never would answer the phone , return messages, or emails, and after two months i got my $85 back over 9 transactions. all you would had to do was answer and i would have had you send me some wheel bearings instead. Yes i am opening my own shop, No i dont want to hurt your buisness, i would rather work together. this is a very small industry and we all need the best support we can get. there is definitely a need and want for silver bullitand im sure no one wants to see you go anywhere but please try to fix the communication issue. It will go a long ways with all of us... Just my 2 cents Josh

sorry dedub i missed your call today we have been moving and i just got slowed down and calling it a night. i should be good to go fri in the new shop. i have taken a break from working on anything during this move but yes i still have the manifolds i was building for you. i really dont want to sell you mine because of the workmanship in mine is just not all that great being the first one we ever built.. i can try to build you a complete kit and should be able to ship it by the end of next week if you want. give me a call fri and we will figure it out Josh

Hey guys my name is josh and i am opening a new fab shop in the houston conroe TX. area. we will be making full custom lifts, snorkle kits, radiator relocate kits etc. everything is one off made by us! pure quality work! we will be dealing with low volume high quality work only if anyone has any questions please feel free to call or text us @ 713-824-8891 shop name will be No Limitz Custom ATV & Fabrication

7.5 diffs project will be well underway in about two weeks.. we are still doing a lot of research to be sure the 7.5 Ford will be the best to use.. but on another note i have two good trooper front diffs i need to unload if anyone needs one? $600.00 each one has been shimmed by lenny and the other is like new with about 20 miles on it... lemme know

If you ride in the mud the fact the the throtle body is moved forward and up helps more than you can ever imagine!

hey guys, we are bulding them for anyone who would like one. they produce amazing throttle response and good top end power the biggest notice was when we added it to a turbo motor! sorry but we do not have dyno numbers yet, as i was talking about before we are building a full built motor in one of our troopers so we are reserving our dyno time for when that one is complete, at which time we will be testing all of our products individually for performance numbers... we are running this intake on two of our troopers now and love them! we have been moving into our new shop for about the last two weeks and it has been a little crazy but we hope to be fully operational as of friday. as soon as i get to work in the shop i am going to build a handful of intakes so that they are ready to ship. i built one for nocturnalsixer and would like to get his input on it before i send anymore out (only because we have had limited use of the intake in a non-turbo setup) so if he has good things to say then they will be available for $550.00 and you will have several options to chose from on color of powder coating. for anyone who would like more info can call me at anytime @ 713-824-8891 plumber I am sorry we lost contact i was away with family emergency. Again i apologize i know you were looking forward to a turbo. Again guys we are just getting our doors open and everything we do is had made by me in the shop so turn around time is not going to be very fast at first, i am trying to build some kits to put on the shelf but there is a lot going on. everything we are going to offer understand we build it and test it on our machines first in some of the hashest conditions known to man (east texas MUD). Long story short, there are a ton of good things coming its just going to take some time. we are not only doing Joyners but ALL atv's... if you have any questions feel free to give me a call or text. I am having problems posting pics on here otherwise i would show you guys a lot more! Thanks No Limitz custom atv & Fabrication Josh West

I hope you enjoy it! You should see a big difference in the top end as well as amazing throttle response! Enjoy!

we are working on building a header for the turbo, as for right now yes we use a custom built manifold.. as for the cat yes it is deletedas well as 1 O2 sensor. And where we ride we are not required to run a spark arrestor and i would avoid one if posable, any back pressure is bad for a turbo....

please keep in mind these pics are of the first ones built... i will post pics of yours as soon as i get it finished. i think you will be blown away!

i have noticed he will gladly answer the phone as long as you have not given him money yet... i went through the same problems with him.... as far as the monster Chery... we are shooting for high reving hight hp motor going for 9000 rpm.. the head has been fully ported and polished and went back with titanium farerah Valves and springs... the bottoem end we had a set of ross forged pistons built and had the rods shotpinned and cryo treated... ARP Head studs etc.... the motor is completely built! yes we expect trans issues but we will cross that bridge when it comes... as for diffs, our new 7.5 Ford diffs will be going in it....

As far as the cams go i will put a call into GTP and check the status.. we are basically sending our cams out and having them re ground to our specs. please understand we are not seeking an all around cam set, All info has been carefully calculated (Bore stroke runner length all flow rates etc.) to build a cam set to work with the motor we are building... standard cam sets are in our future but not at this time.. if you have spacific numbers you want a set of cams built to, we can do that. although i would have to make a few calls to get an exact turn around time for you. We are seeking 250 HP at the flywheel from this motor and a lot of people say it cant be done... Watch Me!!! Have Fun all and we are here to help if anyone needs anything!

I will probably put a price tag of around $2500 on the turbo kit... but please understand these are complete kits you will need to buy nothing extra at all and they will be direct bolt up kits.. system will include Turbo, exhaust manifold, wastegate, blow off valve, intercooler, all pipeing (Tig welded and made of Carbon Steel Polished) all oil lines, exhaust, and all hardware. We are in the process of opening our Shop right now and as soon as we get the doors open i will be sure to let you guys know, we are building a full website with pricing, pics, and information about each product! I have an order right now for an intake manifold and should be ready to ship in the next day or so... i am looking foward to get some input from a couple of you guys out there to see what we are doing... we have a patent pending on the intake so silver bull$hit cant copy it... and its a broad spectrum patent so we should be in good shape! and as soon as the shop is open we will be offering the intakes out of aluminum as well! there are a lot of good things cominig from us in the near future! last but not least because of our move and everything else our turn around time is a little slower then i would like but the workmanship in these products is second to none! everything is port matched most items are Tig welded and everything is a direct bolt up. If you guys have any questions at all please feel free to give me a call @ 713-824-8891 thanks Joshua West No Limitz ATV & Custom Fabrication

one of rocmocs is turbo charged. yhr red one has the head over at GTP getting a full port job, bigger valves and cams ground to my own cam specs.. we also got the AEM Atomic for computer system for it... we are going all out for this one shooting for around 200 HP... on the conservative side...

for those of you who are haveing problems withSB i understand and have had the same issues and personally will never do buisness with them again! for those of you who are looking for turbo setups call me i am building my own and have had nothing but good luck with them! i love mine! i have three of these T2's and two are turbo charged already. i am also building my own intake manifolds for turbo setups! they build a lot of power and look good too! call me at 713-824-8891 anytime day or night! thanks Josh I am a fabricator and can do other things too.. right now i am working on a Ford 7.5 rear end converting them into diffs to work with the stock axles! i have cratered two rear diffs already and am not buying another joyner diff, i am building one that can be serviced and have multiple ring and pinion options as well as can be built bullet proof! Give me a call with any questions!

thanks to Silver bullet for resolving the issue at hand! money has been refunded

The return was issued twice and shortly there after email was recieved saying no funds in their account... its not a big deal but we cant even reach anyone there.. he was just gonna order something else. So sb didnt have to refund his money but no email or call has been returned... the level of professionalism is very poor in my book...

the order is for David Rodriguez. thank for the help

correction: the parts were order directly from the Silverbullet website....

i dont want to be the want to talk $hit but... a close friend of mine ordered the diff kits from silverbullet from their ebay site... email was sent back to him saying that the item was out of stock and money was being refunded, shortly after an email was recieved from paypal the there was insufficent funds were in silverbullet's account... after a number of phone calls and no answeres he emailed silverbullet, the response from silverbullet.. "ohh yea, i will look in to it"... WTH is that? shortly another email from paypal saying another attempt to credit him was in process... and yet again, no funds in their account... he feels avoided and taken advantage of... silver bullet will not even return a phone call.. this doesn't seem very professional to me... again i'm not trying to talk bad about them i just want the issue resolved...

I have a hero cam i just have not put it on yet... my trooper is undergoing surgury right now and will prolly be down for a few more weeks... lots of mods coming soon!