silverbullet

silverbullet frankie i may have one.i will check it out.Most of the time it the gears that get striped. please send email and i will respond to it Thanks Frankie

seems the previous post has been locked and will not let me reply. hey thanks lenny for all the support, for a few weeks i have seen the bad talking go back and forth some trying to get attention towards a new business and trying to use silverbullet as a stepping stone which i dont think is right but to each his own. others complaying because phones are busy, but dont leave messages, as lenny has stated coming into this project has been an uphill deal. i have been trying to help everyone as best as i can answer phones as best as i can, could i use some more help? maybe. i get parts out as soon as i can and i do try to carry aftermarket parts when possible for example(fuel controller,which most of you have and love, tapered wheel bearing, lennys diff and steering upgrades,oversized pistons, kevlar clutches amongst other products.) on that same note i have completely stopped carrying products that in the past had been nothing but problems but were sold anyways for income purposes such as the manual 4x4 whos design i never liked. i have been working with a local web company on redesigning our site so you can just order off of there and not even have to call. now with the phones and calling when the answering machine says leave a message so i can call you back please do,i dont know how many people complain because im on another line or cant get to the phone but dont leave a message,i check my answering machine at least 3 times a day and return calls. nocturnal sixer dont mean to point you out but it is a perfect example after you ordered your balljoints and tierod ends you were advised that parts were on backorder until about the 2nd week of august, and as a coincidence parts arrived as you submitted your claim to paypal so since label had already been created i just submitted tracking info. its not that i was holding back on balljoints or didnt want you to get parts. why would i do that? another issue i wanted to touch base on was the cams. update on daleys cam upgrade, i was able to find a company to machine the caps for our troopers to our specs which is what i used on daley's head after a check up all clearances looked good, sent it back to him with a new head gasket and have been trying to contact him on how it went but he always seems to be busy and cannot get to the phone. i am sure everything will be fine with those cams and will be a really easy install of a few hours. merchant mariner i am sorry its taken a bit longer than we had originally estimated. just want to hear from keith over at daley's hunt n fish before i send anything out. also just wanted to let everyone know we are open and any other info that might have been floating around is false had a talk with Niles over at Joyner usa and got its straightened we had a good conversation with some plans of bringing the new python out to yuma and giving it a good test and tune on paddles. would also like to take this time to thank all the happy customers that have put this aside and placed orders with us ! utvboard7 gets you a 10% during checkout at www.silverbulletmotorsports.net

hi keith i am sorry you have not been able to get a call through, phone is usually being used i check my voicemail at least 10 times a day for the same reason and i have not received a message from you. i am aware that your buggy has been down for quite a while now and trust that i have been trying to get this cam thing situated before i even start selling them nobody seems to sell a valve lash cap kit to fit over these valves and clear the keeper at the same time. if you noticed i pulled those off the website to avoid issues like this, at this point i have a few options we can wait til i get a new sample from a different vendor that said his would work, i can put this back together for you with a set of oem cams, and send you a free gasket set. in my opinion i would never sell anything to anybody on here unless it was tried and proven to work, or we had talked about it being something new and customer giving me the ok to experiment on their vehicle. same reason why "manual 4wd" has not made it on my site or on here is because i have not made something of the quality that i would like to be known for and do not want issues arising from the fabrication of a less than perfect product. again i am sorry for keeping you waiting on this issue and i hope i can make it right for you i have for many customers and im sure we can come to an understanding.

in stock 20 ea plus 10 for shipping

new switch assembly? haha try to old wiggle technique..if not maybe the locking mechanism is not good any more we have OEM switches that bolt on, and aftermarket ones that are water resistant and just have a better quality than the originals they do require you to splice your old switch pigtail on them to be a bolt on deal.

We have 2 sets of Standard size Ross racing pistons that have been sitting on the shelf for a little while. retail on our set of pistons is 749.00 plus freight letting these go for 600.00 a set 25% off and free shipping. 700.00 with a complete engine gasket set. you can check the retail on the website. http://www.silverbul...rod=1100pistons this and many more deals at www.silverbulletmotorsports.net Thank you for your business, Jose Ramirez Silverbullet Motorsports 2305 E. Palo Verde St. Suite A. Yuma,Az 85365 (928)344-2117 shop

i have one found one last night pay for shipping and its yours

its coming along had a little wait in machining just because there were so many people trying to get stuff done for the long weekend. we are waiting on the rods,pistons, and crank to come back from cryogenic freezing. cryogenic freezing is the process in which the parts are submerged into a -300* environment for undisclosed periods of time making the molecules "relax" and ultimately resulting in a virtually stress free rod and crank. this assembly will dissipate heat 30% more efficiently, and it will take much more abuse. cams should be back this week. we should have some pictures up of the final assembly by the end of the week.

Are you going to the Baja 500?

hi refund for tony ward shows up as being received on my end let me know if there is an issue problem was that paypal account was ricks and i think he might have closed the account before the refund might have taken place i will get the issue resolved either way. sorry about the inconvenience

any pictures?

it just depends on what vehicle you have email me with what you have and i can help you

@ dude47 yes i have all axles in stock and ready to ship @merchant mariner got your email will respond asap @huunz hey thanks yes we do have about 5 of those kits in stock 2 stock size and 3 over size (.020) they are 11.5-1 comp and all that needs to be machined is the .020 over on the cylinders unless you just hone it and use the original sized pistons. make sure your head is in spec and all your other components of the motor are in working order kits come with intake exhaust gaskets head gasket &valve stem seals.

no lightening or smoothing of the motor on this build, as far as pistons all of our forged pistons are from the same manufacturer so they do have some resemblances. we will have more pictures soon we are waiting on machine work to be done

merchant mariner send me an email phones are a bit busy [email protected] is the one ive been checking i might have missed it but let me know what you need so we can get it handles a month ago i wasnt running the front and it is possible that the order might have gotten misplaced thanks and dont worry well get you taken care of

Hey Daniel right? Your clutch went out yesterday should be seeing it soon and hope you can make it down one day:)

I am offering a 10% discount on any order over 100.00 for all UTVBOARD members only please enter the coupon code "UTVBoard" at check out for your discount and add your name into the notes section. we are still working on adding inventory into the website so bare with you for a couple more weeks thanks

<a href="http://s576.photobucket.com/albums/ss208/tlm85367/?action=view&current=IMAG0861.jpg" target="_blank"><img src="http://i576.photobucket.com/albums/ss208/tlm85367/IMAG0861.jpg" border="0" alt="9.0-1 pistons"></a> 9.0-1 pistons are now in these will have the teflon coating on the skirt option and are .020 over size

We had one in the shop a month ago drove a lot smoother due to a suspension upgrade they come with also felt torquier than the straight header model of the past..the new one is a cast iron manifold and dual cats with a muffler..I guess the back pressure helps low end but does seem to die down a bit faster up top..new 2012s come bare no light bars winch and other little options older models had but that can easily be added..they have manual 4wd from the factory also

Parts for these vehicles have started to cone into the states consistently from axles to diffs which by the way came down a couple hundred in price..to anything else you may need..and as always we have aftermarket mods for you if you're a go fast guy

well we have finally started tear down on our new shop project vehicle sent to us from Utah. we will be posting pictures and tutorials as we go. for now motors is getting machined to be able to take a set of our 9.0-1 compression pistons with the teflon coating on the skirts

We are out of stock for a couple of weeks on those I know lenny sells a kit which is also good I think he was also out of stock but had plans of making another batch

seems like one of those cheap knock off chips that they sell on ebay say the will raise hp on a stock honda by 100% and its not really true..never heard of them if you decide to give them a try post a review would like to hear it..we do have a bunch of our controllers in stock now dyno proven 11 hp to the wheels and backed up by many here on the forum 279.00

we are working an exchange program on the 1100 cherry engines if you have one that you would like to swap we can send you a rebuilt motor stock bore or .020 over if needed. short block or a complete long block assembly thanks

i have a few stock bore size pistons that have been sitting here for a few months that i am discounting if anybody is doing a rebuild for more reliability and doesnt need to go over size this might be a good deal for you i have stock bore 650 pistons with a high compression dome 300 bucks retail 399 a set also have them in stock bore stock compression. 1100 stock bore stock compression i have 3 sets of these retail 750 will blow out for 600 bucks a set these are high quality floating forged pistons made here in the USA give me a call to order a set thanks