Quantcast
Jump to content


Travis

Members
 View Profile  See their activity

  • Posts

    2,801

  • Joined

  • Last visited

  • Days Won

    191

 Content Type 

Everything posted by Travis

  1. Travis
    https://www.youtube.com/watch?v=YkXgnqtH7tY
  2. Travis
    Farewell Bandit. https://www.yahoo.com/entertainment/burt-reynolds-star-deliverance-smokey-185417744.html 😓 RIP.
  3. Travis
    First off, i assume you mean these () If so, they are the same for front. and different for the back. they are 200 each. look at the link and be sure they are the correct ones. https://www.sidebysideutvparts.com/category/kubota-rtv-axles.html
  4. Travis
  5. Travis
    Just bought a UTV cloth/tarp cover for the Mule. 39.99 at Cabela's. Real thick with covered vent holes to keep it form being a furnace on the inside. Got here in about 4 days. The camo cover is $70, or you can get the olive drab for $40. Really happy with my purchase https://www.cabelas.com/product/Cabelas-UTV-Cover/1229734.uts BUT ,DO NOT! UNDER ANY CIRCUMSTANCES TRY TO UN FOLD, AND PUT THE COVER ON WHILE IT'S WINDY! UNLESS YOU WANT TO GO PARAGLIDING.
  6. Travis
    Hi @Kannon09 Also be sure the old gasket came off too. You might try the CF moto filter BigRich used, assuming it's the same engine. This may fit too. https://www.amazon.com/Filter-Spin-Massimo-Bennche-UTV/dp/B01N2UIZT6
  7. Travis
    I'd go with a rear locking differential. Especially if it's Just rear wheel drive
  8. Travis
    The Kawasaki Mule Pro MX LE and Cub Cadet Challenger 750 are two midsized Utility UTVs ready to be put to work. Let’s see how they compare – by the numbers. http://www.atv.com/comparisons/2018-kawasaki-mule-pro-mx-le-vs-cub-cadet-challenger-750-eps-by-the-numbers
  9. Travis
    That's a nice looking MULE. You'll have many good times with it I'm sure. And that's right, keep the tires on the bottom!
  10. Travis
    I have my 550 torn apart now rebuilding the engine. Luckily it's a single cylinder. Ran good for 17 years and rings started to go. just did regular maintenance.
  11. Travis
    Glad you got it figured out! how come the coil needs replaced?
  12. Travis
    My bad, i guess i looked at the wrong numbers. It is very odd that it doesn't show the clip in the diagram. I even looked at the diagram with the hood and it didn't show the pin.
  13. Travis
    https://www.kawasakipartshouse.com/oemparts/a/kaw/500b6c7df8700223e4797ed4/cables The snap pin is 554, 50410 on the diagram. you might look at manualslib.com for a online manual for your machine, that might have a solution in it.
  14. Travis
    That cable uses a simple snap pin that should pull right out with some pliers, some times where the pin goes through, they might have bent the bottom around to prevent it from coming loose. IF you can post a picture that would help some too.
  15. Travis
    I think most manufacturer's put the stamp below or around the seats.
  16. Travis
    Have you looked for any numbers on the engine? It looks very similar to the sandviper, but the 2 front metal bars are different than the viper. overall it's a good looking machine, and Welcome to the board!
  17. Travis
    Dang. He sounds like a good man. hope your accessories get in sooner than expected!
  18. Travis
    Got the shim today. $5.00 for a 1.33 MM thick piece of metal
  19. Travis
    Stupid question but just wandering, why do you want to swap the head and piston? you can only get a new (OEM) piston with a piston kit for the 500 and 700. http://sportsmancountry.com/Massimo_Parts/CRANKSHAFT_PISTON_MSU500/ http://sportsmancountry.com/Massimo_Parts/CRANKSHAFT_PISTON_MSU_700/ the piston kits are the exact same part numbers, so i assume they are interchangeable. here is the OEM cam http://sportsmancountry.com/Massimo_Parts/CAMSHAFT_CHAIN_MASSIMO/
  20. Travis
    What do you mean by "kick" is it like a backfire? I wonder if valves could be out of time?
  21. Travis
    Alright! Glad you got it figured out!
  22. Travis
    I was going to order the shim from KPH, but they dont keep them in stock, so they would have to order it from Kawasaki, then when it arrives at their location (Michigan) they ship it to me. that would take 2-3 weeks. then a rare occasion happened, I had a thought. Pro Powersports here in Conroe is a Kawasaki dealer, so they are going to special order the part for me, and can have it here within 10 days. 👍
  23. Travis
    YIPEEEEE! I got the axial play figured out, and i know the correct shim size i need! woo hoo!
  24. Travis
    http://sportsmancountry.com/Massimo_Parts/MSU_500/
  25. Travis
    Hi I have 01 550, those plugs are for oil pressure gauges. I have not heard of anyone putting a cooler on it. Does it make any sounds like clicking when trying to start? I'm not saying that i couldn't be done though. If you need any parts go to kawasakipartshouse.com I have a repair manual with several trouble shooting pages, if you like i can send some screens shots of them to you.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...