NDV45

yes Battery is good and it is charging. Mine is a 2008 Tracker and it was funny changed pump drove it and parked it. Next day fuel pump not working no voltage to pump. Found a relay that no one knows any thing about shows a picture of something in the manual;, but no item number. There is also two fuses that are no listed in the parts manual. The maintenance manual I have for this unit has a publication of 2006. My unit is a 2008. Things sure changed. I'm Sorry I said I could not help you I may have lied to you. I have a foam rubber wrapping that came on my old pump. The rubber is still usable if you need one. Let me know.

I am curious Does the 2008 Cub Cadet Tracker have this chip in the ECU? How do I go about checking codes in it, does anyone have an idea please.

I am fighting a fuel pump problem. I have changed everything, Pump , Regulator, Filter It will start run any where you want to go. Park it turnit off and the fuel pump will not come on due to low voltage. Any on have any ideas?

Not sure of what you need, Are you talking about the rubber sleeve on the pump? If so I cannot help you but You might try contacting the sellers on eBay they might help you. Sorry I shouldn't have responded.

I have 2008 Cub Cadet Volunteer Tracker. Was running fine, parked and next morning electric fuel pump inop. Checked voltage had 4.2 volts. Swapped relays in fuse box, checked all fuses (good) and still low voltage. Does the ECU control the voltage to the fuel pump or which relay controls the voltage to the pump? Have checked all wiring and not found any place it could be shorted (not saying I may have missed something). I am at a loss. Need Help Please.

The drain is hidden from open sight on mine. It is a pull, push outlet that drains the oil out a ole in the wrong place so it runs across the bottom of the chassis. I have found for me, with bed up and on the drivers side I can reach in and forward to grab the oil drain. Awkward for sure but doable.

I have a 2008 Cub Cadet Volunteer which needs a Master Cylinder. I referenced the parts breakdown for the item 661-04042 (master cylinder) and to my amazement I found it for $125.00. Well I then thought of a Master Cylynder rebuild kit. I have yet to determine what Master Cylynder I have. The casting says Hayes Brake 3/4 2. The bore is 3/4 and it has 2 outlet ports on the bottom. Looking at pictures it really looks like a Hayes Spider 2. I cannot locate a kit for that cylinder either. Can any one tell me what rebuild kit (S) I could obtain to put this back into service. I will try to attach pictures to help. Thank You For Looking

Just to say Hello. New to group. Have a Cub Cadet 2011 4x4 Tracker. Know absolutely nothing about it, except their parts are expensive. It had a light bar on top which had 4 light fixtures on it. They didn't work. I took them apart and 2 of the 4 lamps had the entire steel holder inside totally rusted out. Looking for some lights for parts but can't and probably won't find, but it never hurts to ask. Am retired tool maker so always messing around.