Ridge Runner

Curious minds want to know

On the Coleman 550 outfitter, similar or same thing. Easy fix. Hold gear shift lever in low position until you start moving, then it’s fine. Annoying, and shouldn’t be like that, but they are what they are. Make sure you are using correct oil, I’m assuming 400 also has a wet clutch. I could be wrong

I was deeply disappointed in the prices for exhaust parts. Rural King is selling a similar 550, maybe they can help?

Will this parts link for the Coleman ( made by Hisun) 550 help? http://3546502.shop.netsuite.com/s.nl/c.3546502/n.1/sc.27/category.137049/it.C/.f

That’s great news Hisunsadman. What is a wot kill reset, and how is it done? Thank you

How did the repair turn out?

Thanks Jerry. I thought the Coleman 550, was made by HiSun, and the TS 301 would work?

Thank you.

Thanks Travis. I’ll have to measure it. I bet it’s in millimeters being made in China. Thanks again

Please let me know where the fuel filter is. I have the Coleman 550 Outfitter version of the Hisun. Manuals say filter must be changed. No location specified in the manual. I traced the fuel line from tank to injector, can’t find it. I called Coleman, they told me some never got them. Guess, I need to cut line and put a universal riding lawn mower filter in the line? Thanks

Fortunately so is mine. I don’t run it hard, or in deep mud, but I do use it. So far I’m happy.

Ok.

Did you watch the video I attached? It’s a white connector with a white protective cap. Maybe yours Is different than the one in the video.

I believe the Coleman is very similar in regards to the connection port and scanner. I could be wrong. I hope this helps.

Tiny Scan makes one. I think it’s TS 301?

Thanks , I think they have a mini reader you use with your phone for around a hundred...

Hisun has a YouTube video that shows where the port is.... by the engine. Tiny-Scan is same company as Tiny Tach.

Hi Tiny Scan TS 301 will read the codes, I believe,

Thanks Travis. Great idea!

Thank you Travis. Checking it!

Hi my friend has a 2018 Massimo Warrior 700. It will continue to run, even after removing the key from the ignition switch. And stays running until he disconnects the battery. The other clue is the left head light stays on, he has burned out three left headlight bulbs in a year. He has checked for loose connections. One final clue is he went through a 6 inch puddle of water, so some wires may have gotten wet. It’s been inside for 4 days, with same symptoms. Any ideas? thanks in advance

Many thanks! Appreciate the information

It shouldn’t be this contentious about the correct oil fill level should be in my opinion. Seems like some of the machines didn’t have the extension and some did, the manuals aren’t that clear about it either.