BuggyBoy

Took off the small cover on charger and cables look ok and were all tight. however, decided to add another pos cable to bypass current pos cable from charger to battery as a test before I dismantled for warranty testing/return and it worked, now charging and no fault. The Pos/Neg charger cables seem too small a gauge for the current (3-4mm?) going through them. I’m going to upgrade the charging harness to 6mm to stop overheating and cable breakdown. Thanks for your advice. Are you Hisun EV support or independent?

'E013 - Charger Output Current NotAccepted - Battery voltage is detected but the charger is unable to output current. This is normally caused by an electrical device connected between the charger and the battery which passes through voltage but not current. Poor connections can also cause this. Ensure the charger is properly connected to approved equipment. This error will automatically clear once the charger is reset by cycling DC or AC'.

E013 is an issue with loose connection or an external device interfering with charging. got same with mine but can’t see any loose wires or connections and no other device has been installed. have emailed manufacturer of charger with details and data log from charger. did you resolve it?

Just bought a new Hisun E1. From the minute i drove it off the barge (we live in an island) it had a loud 'creaking' noise from the rear, and a clanking and vibration from the front. The noise at the front sounds and feels like a CV or UJ has gone. All shafts and joints are solid and seem to be greased, as are mounts for gearbox and diffs. The vehicle sounds like an old steam train going down the road - worse going down hills but no real difference turning or 2WD, 4WD or diff lock on. Noises increase/decrease with speed of vehicle, so definatley drive-train related, not just something loose. Oddly, all noises go in reverse. Real pain in the backside to get to dealer as will cost about $1500 just to get it there and back again. Anybody experienced these issues or similar on an E1 or any other Hisun? Cheers.