Dealin

I purchased an aftermarket Wireless Remote Switch for my 2021 Tracker LE with factory installed winch. Can I wire this Remote switch to the factory switch wiring or do I have to go to the winch solenoid? The reason I want to do this is to mount the Wireless "receiver box" under the hood for better range. The Tracker winch solenoid is located by the battery which is under the backside of the cab and the "receiver box" would be tucked away-probably limiting the range. I could extend the wiring, but would be a bit of a pain. Accessing the wiring to the switch would be easier. Any input is appreciated. Thanks!

Where did you get the LED headlights from? Are they just bulb replacements?

I was going to recommend a Tracker 800 SXS, but I don't think you can buy one for that price range. I love mine after having it 1 year.

Congratulations! I really like the Blue. They didn't offer it in 2021 when I bought my Tracker 800 LE(Camo) After having it 1 year, this machine is everything I had hoped for. I have added a few accessories(2 rear facing spotlights(for plowing), Rear Bumper, Side view mirror, Tracker Snow Plow(I'm in MI), 3rd Brake light,Horn. I also added a solar panel to the roof (which is not visible)which helps charge the battery when outside. Not sure where you are located, but if you buy a plow, get the Tracker plow. It takes 1 minute to put it on and off. It is also built well. Let me know ,as time goes on, how you like it or any issues.

I have a 2021 800 LE an added a rear bumper aftermarket-which matches the front grill guard perfectly-aftermarket for about $150(tracker wanted over $300). I found that it was listed for an Arctic Cat SXS which appears to be the same rig as the Tracker.. FYI: As far as snow plows go, I love the factory(Tracker) plow. I went with the 66" wide plow-I thought the 6' was too big. The install is simple and with the plow off, does not affect the ground clearance. (mounting plate mounts flush underneath)The blade comes on and off in less than 1 minute! I also lower it onto a furniture dolly to move it out of the way until I need it. To angle the plow you step on a release to turn the plow-super simple. The factory plow is an awesome set-up-I strongly recommend it! Also, after watching some You-tube videos, I removed the wear bar on the blade and installed 2 steel pipes 1 1/2 - 2" dia about 12" on each end.-fitted over where the original wear bar went. This allows the blade to "roll" over dirt or grass without digging in. Most my plowing is a dirt/gravel road ,however it works well on pavement too. I tried PVC first ,but it would crack after1 plowing!

I have a 800 LE and don't have the hot dash issue, but found if I remove the doors in the summer, it really cools the cab down. I also installed a 12V dual fan mounted under the dash-one aimed at the driver and one aimed at the passenger to help in the hot summer days. (Bought it off Amazon.)Removing the doors makes for easy entry also. I do reinstall them in the fall.

I changed my fluids with the Tracker 800 on the ground-no problem. The online Service Manual shows which drain/fill plugs are which and where they are located. You will have to make a fill hose that attaches to a funnel to fill the rear diff.