Quantcast
Jump to content


Charles Green

Members
  • Posts

    6
  • Joined

  • Last visited

Everything posted by Charles Green

  1. Did you check for 12v at starter solenoid with key in start position? Did you you check fuses?
  2. There are other videos on YouTube showing installed eps. Hisun has a video as well. The videos may help explain the installation.
  3. There is a YouTube video on installing electric powered steering on an older Hisun by a guy who goes by Indeewoods. Check that video out.
  4. Sounds like your shift linkage needs adjustment. After removing the console the linkage is on the right hand side slightly behind the shift lever. There are YouTube videos that help show how to properly adjust the linkage. Basically you need two wrenches. 1 to loosen jam nut and 1 to hold linkage from turning. There is possibly is a damage fan gear. Again there are YouTube videos that help show how to repair and adjust.
  5. As Don stated check valves and timing. Hisun have been known for valve lash changing. Plenty of YouTube videos on how to adjust.
  6. Where does an Axis 500 receive power from? Is there a relay from the ignition switch or is the pump controlled by the ECM? Asking for some folks that are having issues that seem to be a lost ground.
×
×
  • Create New...