Search the Community

Does anyone have experience installing a Silent Rider exhaust on their Massimo Buck 450? The BT-6A looks to be the right config but seeing if anyone else has done this. There is also a universal BT-99 but would prefer direct a bolt on fit to the stock muffler.

Just bought gently used (16 miles) Massimo Buck 450 and I'm having the idle won't run when you step on the gas issue??? WTF?? Is it in fact the exhaust sensor??

Got a practically new (but used) 2021 Buck 450. Tried out the winch to move a log, and realized quickly it is really awkward without a remote to be able to watch the winch as you roll it up or let it out. Was it supposed to come with a remote? Or do you just let it out and pull it in blindly from the dashboard control?

It has done this since day one that we purchased it from Tractor Supply. I contacted the service man that Tractor Supply recommended and he told us that there wasn't anything he do to help us with. Has anyone had this same problem and can offer suggestion on to correct this issue ? It would be greatly appreciated.

When starting out even in low range it feels like the emergency break is on you have to rev it pretty good to get it to move. once it’s moving it seems OK but at low RPMs and turning its real struggles to move. is this the nature of this machine Buck 450. brand new thank you.

I just bought a Massimo Buck 450X with the rear facing seats. It's brand new yet there is an awful squeak coming from under the rear. Squeaks when weight is applied or removed and also when the vehicle is in motion, mainly over bumps. Seems to be coming from close to the inside of the wheels. Anyone else experienced this or know what I should do?

Buck 450 wireless winch remote control. Opened up the winch relay control box. AS some reported for other models, there's a factory wireless receiver in there, but they won't sell you a remote for it. Easy to replace since it's on quick connects. Disconnect the factory receiver and replace. Amazon has a bunch of very similar units. I replaced it with this ($20) . took 15 minutes. Wiring is the same. This photo is the inside of the winch relay control box located in the passenger side front wheel well. Two screws hold the relay box to the frame. Remove those and just turn the box around. 6 small screws on the back, Open it up, remove the factory receiver. I clipped off the screw tabs on the new receiver just to make it easier to slide into the case. Clipped the new receiver wires and added quick connect lugs. This remote works great from up to 100 feet away. https://www.amazon.com/AUTOUTLET-Recovery-Controller-（Batteries-included）/dp/B07CPRVW6Y/ref=sr_1_1?crid=13OR05GVT51TT&keywords=AUTOUTLET+2PCS+Recovery&qid=1645882829&s=automotive&sprefix=autoutlet+2pcs+recovery%2Cautomotive%2C53&sr=1-1