Search the Community
Showing results for tags 'msu 500'.
-
New to owning a UTV and got myself a project one as my first one. Changed out the clutch and clutch housing etc. as the UTV was having problems going up hills and getting up to speed but now in the process of putting it all back together it won't start. Also changed fan gears for shifter Here's what I've found so far (apologies for the bullet points); Motor will crank over and makes good turnover speed. If I use spark plug tester or ground to engine, no spark. At the connector to the ignition coil I get consistent 12v on the white wire and nothing at the black. Read in one of the posts that the 12v to the white wire should be intermittent when trying to get a spark at the plug? Tested ignition coil using a multimeter on resistance setting. Between two pins I get 0.46 ohms or thereabouts. Between either pin and spark plug boot I get somewhere around 16k ohms. Not really found a good video on testing these coils but think those are good readings. Checked fuses in fuse box and are all good. Fuel pump cycles on when I turn key to on position. I disconnected the ignition coil to remove the clutch etc. to get it out the way but don't think I've damaged anything in the process. Can anyone point me in the direction of what to try next? Been trying to use the manual but considering the test procedure for the ignition coil is for the wrong type of coil, it's not been too helpful. I've read on another post about checking the ECM the two pins with 12v etc so will take a look at that next but any ideas that could get this machine started again are welcome!
-
I have 2015 msu 500. All of a sudden I'm not getting any fuel. I thought it was the injector. It wasn't pumping through the injector. And building so much pressure that it was blowing the line off. New filter and injector. Same problem. Any ideas?
-
Hi guys. I recently purchased a pre-owned Massimo MSU500. It has a few small issues that I am working on, however, I have very little information on this UTV. The guy that sold it to me said it was a 2004 year model. I don't even think Massimo existed in 2004, so, I don't think that is correct. I contacted Massimo Motors customer support and provided them the VIN number and some photos of the machine, but, they said they have no record of that VIN and couldn't help me. I find it ridiculous that the manufacturer cannot help with their own machine. Does anyone know of any other way to find info for this machine. I need to know the year model in order to find the correct parts. I can attach additional photos if that will help. Thanks in advance. 20?? Massimo MSU500 VIN # LWGMDTZ40EB000346