Quantcast
Jump to content


Recommended Posts

Posted

I started with Arizona Riding a long time ago and left because all it seemed to be was a Joyner bash place and lots of useless arguing which is part of the reason I delete useless arguments here and push hard to keep things friendly and pleasant. I also check JoynerForum.com occasionally.

Posted
I started with Arizona Riding a long time ago and left because all it seemed to be was a Joyner bash place and lots of useless arguing which is part of the reason I delete useless arguments here and push hard to keep things friendly and pleasant. I also check JoynerForum.com occasionally.

Kinarfi, it's strangely quite over on RA now most of us old Joyner members their post here or on Joyner Forum. The UTV section does not get hit for days on end. I think all the crap that went on was because they saw a threat because they recognise a good Side X Side when they see one. Now the Rhino has turned into a Killing machine, the Prowler 951cc has bigger problems than the Trooper had to deal with the and the RZR has had multiple issues, those bullies are now busy wrenching and not typing. Life's sweet, what goes around comes around. I think the only one to come out of all that was rocmoc, who always held his head high, didn't defend by putting the boot in(like me) because he recognised the fact that "it's all about getting out there and doing it, in whatever you drive".

So Admin, for me it's here and Joyner Forums with the occasional look at RA.

Cheers Mike.

Posted

Thanks for replying everyone. Riding Arizona.com looks similar to Mudbog.net and they use a different forum software...called vbulletin, which we're using over at autoverve.com

So I was just curious what other forums are using and such.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By Polish DIY Lover
      Hi i'm jakub and i making DIY UTV. Some questions?
    • By shawn b
      my hisun died on me while driving it started losing power then stalled. it wants to start but wont . it didn't over heat. I replaced plug,fuel filter injector, and fuel pump.put code reader on it and says no codes. have any ideas possibly sensor? Any input on what it could be would be appreciated
×
×
  • Create New...