Quantcast
Jump to content


Massimo Buck 400 High Speed

rtofter

By rtofter
in Massimo UTV SxS Forum

 Share

Recommended Posts

rtofter Newbie

rtofter

Posted
Posted

Does anybody have any experience with a Buck 400 on the road? I have license plates on mine and was curious to know if anyone else does too.  Also if anyone knows if this thing can sustain 40mph for and extended amount of time.

  • Alex changed the title to Massimo Buck 400 High Speed
Bill Hughes Enthusiast

Bill Hughes

Posted
Posted

No. these vehicles are not meant to be used on public highway for extended times. Street use should be limited to necessary transit between off road use which means short periods on lightly used public highway. NOT in place of a personal car or truck. 

  • 1 year later...
Blair Contributor

Blair

Posted
Posted

My 2021 Massimo MSU 800 has never been on a trail. I live in Nashville and it's just a fun vehicle to cruise around all spring, summer and fall. Winter, it stays in the garage and gets cool upgrades. It's a just a cool hobby machine. I even drive it on the interstate sometimes. (cops in Nashville don't mess w you) It will cruise at 70MPH with the larger 29" street tires I put on it. It has almost 3000 miles with not a problem whatsoever. You will want to get some street tires. Those off road tires are NOT designed to travel at high speeds, they will sling apart if they get too hot. Plus street tires are SO much quieter. People stop me and take selfies/pictures all the time. The girls LOVE it and I love the girls. I named it TAZ and it has the Warner Brothers Tasmanian Devil decals/theme going on. Yep, it's just a FUN machine with a bumpin' stereo and the best underglow lighting. You'll see several of them cruising around in Nashville. Hope that helps Brother.

I have identified life as a time to LIVE!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Homeowner A
      Code Reader for Delphi MT05 Coleman UTV 400 Hisun
      By Homeowner A
      Is there a code reader available for the Coleman UTV 400?  I tried using the HUD ECU Hacker software and cables/adapters but no luck OBD to delphi 6 pin and KKL VAG as well as ELM327.  Will not connect.  I was able to get it to connect randomly a couple of times, but haven't been able to since.  I was able to clear and read the codes briefly.  I'm aware of the Tiny Scan 301 but it doesn't seem to be readily available.  There's a few out there but they are expensive.  
    • Grant
      Can’t figure out what part I’m missing
      By Grant
      I recently bought an axis 500 and it’s missing a box or something the plug is L shaped I’ve looked through the wiring diagrams and still can’t figure it out. The plug is located right near the battery housing 

    • judy140
      Bighorn Explorer 400
      By judy140
      I am looking for a service manual for Bighorn Explorer 400
    • strike250
      Free Massimo Buck 400 service manual
      By strike250
      I have the factory service manual available for the Buck 400. Just send me a message with your email and I'll get it to you. Although there is no charge for this, it would be great if  you would visit my website where you could donate any amount to help do things like this with others who need it. Again, there is no charge for this manual, and no obligation to donate. But if you did, I would thank you for sure. Have fun on the trails. www.warriorsoffroad.com
       
      Matt

    • didgeridoo
      Hisun Sector e1 Battery replacement: any tips?
      By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...