Quantcast
Jump to content


Recommended Posts

Posted

 

We own 40 acres with the house, and a 2 acre hunting camp & RV, 40 miles away.

I have 7.5' X 14' single axle dovetail with a expanded metal rear gate/ramp, wood floor, 14" high, 2" square tubing side rails.  Single axle because the heaviest things I haul are a 18 hp tractor and a K-TransMule, dual axles are much heavier, cumbersome, and costly to maintain.  Both the tractor and Mule have 2" balls to tote other stuff after I get to the site.

I have hauled upto 5 - 30" X 12' logs, loaded the old fashion way, with a cant hook and log side ramps.  Unloaded via a chain around a stout tree, then drive off, repeat.  If I cannot perform the task with my light equipment it doesn't get done.

Posted

It would depend on what the size of stuff you want to carry, conditions, UTV size, etc.

There are the little metal tow behind 10 cubic ft dump trailers with a pin hitch available from a number of places for around $100-200. These are for intended for low speed offroad use.

There are some bigger offroad style trailers in the $300-800 range depending on how fancy you want to get. These typically still have the pin hitch, some include nice features for off grade work, such as articulated axles. These still aren't meant for higher speeds or on road use.

You mentioned some larger stuff so another option would be buying a small kit trailer from Harbor Freight or Northern Tool. They're usually more like $250-500 and require you to supply a piece of plywood for decking. They usually have an automotive style hitch so they won't handle too much angle difference between the towing vehicle and the trailer if you're "offroading". They also tend to be wider than most UTVs so you will have to be careful that they fit on the trails you want to use. They are however able to be titled in most states, and are legal for road use.

The best bet is to look at exactly what you want to carry, and conditions, path width, etc and start looking at trailers from there. Northern Tool caries a good selection of all three styles mentioned above with various features. Harbor Freight has the first and third styles mentioned also.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Chas
      When traveling in the 40 mph range and throttle is released machine starts surging instead of a gradual slow down any help would be appreciated as dealer is clueless 
    • By Paul Angstadt
      Hi everybody. I just bought a 2012 Hisun with the 700cc engine. Was wondering where i could find a service manual for this thing?
      Its going to need some parts that are missing, like the air intake hoses and other things. Also the dash display is out. the only light that works is neutral light. Not even sure on the model. from pics I've seen, it looks like an HS700. Kind of grey with the black stripes on the hood. Just hoping i can find parts for it.
      Thank you for any advice you can give me. By the way, it does run and goes forward and reverse.
      Paul
    • By diamondjfarm
      I got an old 2003 Arctic Cat 375 Auto, and just bought a 2008 AC 650 side by side. Got a new starter, solenoid, and battery for the 650. Gonna change the crankcase oil and filter while I'm at it.
      Anything I oughta watch out for from them that's done the starter/solenoid on this model?
      Don't have a manual yet for the 650. Any recommendations for oil weight/grade?
      Thanks.
    • By sxr951
      parts for massimo, hisun,etc in florida? where can i get parts for the massimo 700.. like bolts and console i  didnt see any bolts on amazon to go with cylinders and any thing when rebuilding a 700 engine 
    • By BernieG
      I could really use some help identifying some disconnected components on a Yard Sport YS400. The first part is this pipe, which comes out of the exhaust port area or the cylinder. It looks like it had a piece of rubber hose on it, but the hose is gone, and I have no idea what it was previously connected to.

      The second item is this vacuum valve looking thing.  Again only one line is still attached.  What is it's function and what other lines should be connected to it?

      The last thing is this hose, which exits the side top of the fuel tank (not the fuel line hose) but is not connected to anything

       
      Any help the community could provide would be greatly appreciated.  This UTV belongs to a friend, and I am trying to help him get it running correctly for his kids.
×
×
  • Create New...