Quantcast
Jump to content


Recommended Posts

Posted

I was wondering for you guys that have contacted Joyner ,what was the best way. I have e-mailed them numerous times never got a response via e-mail or phone call .If I call them direct do you ask for service ? Any help would be apprieciated thanks :)

Posted

I have a rear shock issue ,not blown functions normally the spring is rubbing on the shock body makes an ungodly

squeeling scrapping noise .ai called my dealer last fall when I firsy bought it hel told me Joyner will not warranty

shocks but said he call and try well he never called . Just wondering if they can help me out warranty wise or

maybe sell to me at dealer cost just wondering

Guest Lenny
Posted

When you take the spring off, is it straight or bowed. It should be straight. If its bowed, it's defective. Also check to see if the ends are square with the body. If not. you should be able to grind them square. If they are square and straight, they should clear the body.

Lenny

Posted

The stock shocks are not that great. Replacing the shocks should be on your future upgrade list. Easiest thing would be to find a used one and replace your shock. Keep your old shock for the day when you blow a shock, it will happen someday! Shock replacement was my NEXT upgrade until I broke the tranny (my fault).

rocmoc n AZ/Mexico

Posted

I have tried calling and always get an answering machine. I finally started dialing 0 for the extension and get to talk to some one and then get transferred to the proper person. I have not had good luck with them though. Last fall after only having my T2 for only 2 months I called and told them about the problem I was having with the rear diff and got no help. After reading all of the posts on this and other sites I Know they were aware of the problem and did not help. I called and talk to I think Jeff and he told me he would get right back to me well that was 5 weeks ago. That is the kind of service I have consistently gotten from Joyner. I was seriously thinking about starting a dealership but not a chance in hell now. I hope you have better luck. Sorry about the rant but I am VERY UPSET with the service or lack there of.

Posted

When I researched utvs last year trying to decide which product to buy ,I came across the Joyner line .I found

numerous blogs and websites which discussed the pros and cons of the new trooper . I loved the look and

size of it ,found a dealer and bought one .One the biggest sellers on this product was that it is automotive based

technology not atv . Since I've been in automotive repair industry for 25 years I fiqured this was great choice.

I think Joyner has a great oppurtunity to build into a great company if they can improve on their quality and

make customer service their prime objective . Since it seems now they have a big issue with differentials I

hope they would acknowlege the problem . Iam sure they don't have the funds to back $1800 worth of diffs

on each sale but at least provide replacement parts that are upgraded and provide a service bulletin on how

correct incorrect pinion depth issues. acknowlege the problen don't hide from it.

Posted

I can tell you guys, from a dealer stand point, that Joyner has been really good about taking care of their customers. I have worked for / with the other manufacturers ie.. Yamaha, Honda, Arctic Cat, Polaris. Those companies do not step up like Joyner has. Joyner is currently going through a complete restructure which will improve part, service, and the machines themselves.

You may have better luck going through a dealer rather than trying to deal w/ Joyner themselves. This is what dealers are for .... to provide support for you as the customer. Joyner has grown so fast in the last 2 years that they are struggling to keep up, and somtimes the customer isn't knowledgble [sp] enough about procedures to recieve good support.

Please be patient they will continue to support where they can. BUT not all failures are manufacturer defect alot are abuse, and neglect, which should be determined by a dealer.

Good luck A.

Posted

I do think that Joyner is going in the right direction and I think that they some of the best ideas out there for sidexsides. I also know that they are very busy but they have still helped us out when I have called my rep on a Sat. night and that means alot to us. Everything that we have had an issue with, they have helped us and gotten on it very fast.

Posted

We bought ours right from Joyner so we don't have a dealer to go to. They have two dealers listed on TeamJoyner's website in Las Vegas however we called both and neither one is still a dealer (one only had two T2's for a month and decided they didn't want any part of Joyner, their words when we called them) so we have to go to Mesquite, St George or Bull Head City for repairs.

My real problem is that they seem to have cut corners on some major parts (qaulity of parts used and the workmanship itself), ie the diff's, I know for a fact that we baby the T4 and the majority (99.9%) of its miles have been on forest roads not on black trails, because thats what our son is comfortable with.

The fact that Joyner won't return emails or phone calls to people who have bought their product doesn't speak very highly for them IMO. They were very happy to take my check and cash it though. There also appears to be some problems with even the dealers not following through if you read all the posts. Again this is JMO and everyone on this board who knows me knows that I have always stood up for Joyner but just because they are restructuring doesn't mean they have the right to leave their LOYAL customers out in the cold.

Posted

The closest dealer is three states away the dealer I bought it from is a joke and has not helped with anything at all. But what is the excuse for not returning calls or emails. I will not cut them any slack for poor customer service. Its easy for you if your a dealer but what about those of us who aren't and cant get any help? I have had it for almost a year and have only been able to drive it for 4 months it took 6 months to get a new fuel tank when that broke. They need to take care of the people that already have one or people will quit buying new ones.

Posted

I dont blame you for being upset and I agree with you. At the same time I think things will get better and even though we are in MO I would be glad to help you or anyone else any way that I can. You can PM me here, email me at [email protected], or call me at 573-478-3203. Rusty. By the way, I can get your parts ordered and get them shipped straight to you from the factory.

Posted
The closest dealer is three states away the dealer I bought it from is a joke and has not helped with anything at all. But what is the excuse for not returning calls or emails. I will not cut them any slack for poor customer service. Its easy for you if your a dealer but what about those of us who aren't and cant get any help? I have had it for almost a year and have only been able to drive it for 4 months it took 6 months to get a new fuel tank when that broke. They need to take care of the people that already have one or people will quit buying new ones.

I'm sorry if you have less than acceptable support from your dealer. Their are a number of dealers, all brands, that are only concerned about the sale and no support after the fact. This is not really Joyners fault, like I said b-4 this takes place w/all brands. As for it "being easy" for dealers...... you are sadly mistaken. We have to deal with, and take the heat for, all of Joyners issues. With the other brands all you can do is contact customer service. No parts , no warranty issue support, no weekend calls while broke down at Moab. As dealers we are required to meet certain criteria to be and retain our dealer status. Some do a good job, others don't. How many of your dealers covered the warranty labor that Joyner doesn't pay for.......most do not....... I do. I personaly wish Joyner had no contact w/ the public directly, other than customer service, like the other brands. This would create a better dealer network, with fewer derelict [sp] dealers.

That being said...... I will gladly help any of you any way I can. We are in N.E. Nevada. Not right down the street from most of you, but will still try and help. 775-753-8223 or e-mail [email protected]

Posted
I dont blame you for being upset and I agree with you. At the same time I think things will get better and even though we are in MO I would be glad to help you or anyone else any way that I can. You can PM me here, email me at [email protected], or call me at 573-478-3203. Rusty. By the way, I can get your parts ordered and get them shipped straight to you from the factory.

Even to Canada???

Posted

If you need a part, I should be able to order it and have it go straight to you, otherwise I would have to get it, then mail it to you.

Posted
I have a rear shock issue ,not blown functions normally the spring is rubbing on the shock body makes an ungodly

squeeling scrapping noise .ai called my dealer last fall when I firsy bought it hel told me Joyner will not warranty

shocks but said he call and try well he never called . Just wondering if they can help me out warranty wise or

maybe sell to me at dealer cost just wondering

I have a complete set of shocks with about 500 miles on them that Iam not using, if your interested. Although, I got to tell you that the rears would develop a squeek in them after a long ride (probably from all the dust). A little silicone spray and they'd quiet right down. Let me know.

Posted
I was wondering for you guys that have contacted Joyner ,what was the best way. I have e-mailed them numerous times never got a response via e-mail or phone call .If I call them direct do you ask for service ? Any help would be apprieciated thanks :)

I contacted Joyner directly and had a very good response from them about a tire problem. This was my contact address [email protected]

Hope this helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By JOSEPH LAMAR
      I have a 2020 axis 500 and I have replaced the TPS twice and the whole throttle body assembly once and still have code 122. I can barely drive the thing. It bucks and surges like crazy
    • By Texjpr
      2002 ranger 500 4x4 stopped running and wouldn't restart. Service manual wiring diagram helped identify the hub safety switch as the culprit. Using jumper wires to bypass  switch allowed the engine to start and run normally. Inspection of switch showed melted epoxy and a strong smell of burnt electrical. Unable to find replacement part either used or new. Is there a work around other than jumper wiring?
    • By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
×
×
  • Create New...