Quantcast
Jump to content


2018 Hisun Sector 1000 Crew stalling but starts right back up. Please help!

Jon Spruill

By Jon Spruill
in Hisun UTV SxS Forum

 Share

Recommended Posts

Jon Spruill Newbie

Jon Spruill

Posted
Posted

Hey Guys, I have been chasing a stalling condition for about two weeks now. The bike will crank up and idle fine, then after about 20 seconds it will fall on its face and stall. It happens at both idle and while running at various rpms. You can turn the key off, turn it back on and it will fire right back up without trouble. I have verified spark on both cylinders with a spark tester. I have also added an inline fuel filter, and pulled the injectors to verify proper pulse on each. Things I have replaced - (relearn procedure performed after each component replaced): spark plugs, ECU, relay/fuse box, fuel pump, & throttle position sensor - all with no improvement of the condition. The only warning light I get when the condition occurs is the oil lamp. The bike only has 14 miles. I am at a loss and appreciate any help and suggestions! Thanks

Link to comment
Share on other sites
aefron88 Community Regular

aefron88

Posted
Posted

What do you mean by "relearn procedure"? ECU reset? How did you perform this?

Did this start with an outdoor temperature change? IE it ran fine when it was warmer out but now that it's cold it dies at idle.

If you give it a little gas does it stay running?

I'm wondering if the coolant temp sensor might be giving a false reading which would adjust the fuel map to where it won't idle

Link to comment
Share on other sites
Jon Spruill Newbie

Jon Spruill

Posted
  • Author
Posted

The ECU relearn procedure is done by holding the accelerator to WOT for 3-5 seconds and cutting the key off while @ WOT. I don't believe temperature is affecting it, I live in MS. The bike while die at any range in RPMS and giving it gas does not help keep it running. It just suddenly dies. No symptoms to lead me to believe it is a rich/lean condition or poor idle speed. Just shuts off but can turn the key off and back on and it fires right back up until it stalls again.

 

Link to comment
Share on other sites
  • 7 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • lmarkie
      Predator 670 Idle
      By lmarkie
      Anyone know how to adjust the idle down on a Predator 670 motor?
    • mac66
      Anyone have a Bad Boy Bandit?
      By mac66
      Apparently, these are Hisun or at least they use Hisun engines. I can't find much info on them online yet.  Ran across a used one with just 100 miles on it as a very reasonable price.  Just curious.
      Okay, more info...they are owned by Textron Corp who also owns Bell Helicopter, Cessna & Beechcraft aircraft, Ez-Go & Cushman and Arctic Cat and a bunch of other companies.
      So are thy cheap Chinese crap machines or are they good to go?
    • Buck
      Hisun will not change gears while running
      By Buck
      My father-in-law has a Hisun 750.  It has started to not change gears while running.  He can turn it off, change gears, then restart and it will change.  I thought it might have something to do with the brake but can’t find any info.  Thanks in advance for any info.
       
    • Mater Help
      2019 Bennche Warrior two questions
      By Mater Help
      I have a 2019 Bennche Warrior that I mostly use around my property for odd jobs. I also cruise the neighborhood and make short runs to the local pub and neighbors houses. The exhaust system is super loud. I was hoping to find something that will fit and work that is quieter. I have included a photo of the system that is on the unit now. Any ideas or recommendations? 
      Second question: Recently, it has become hard to shift from park to any gear if the engine is running. The shifter moves fine if the engine is off. It is almost as if the clutch (no pedal) is not disengaging completely. I have not tried to do anything to correct the condition yet but as it gets increasingly more difficult, I need to do something.  Looking for a place to start. Nothing in the service manual that I can find. 
      Any help will be greatly appreciated,
       
       

    • sxr951
      anyone ever have to beat your starter out with a hammer till it broke in half?.lol
      By sxr951
      corrosion had its oring neck area  jammed in.. and besides that had corrosion in the starter just shorted when ran direct jumper cable to the starter post power to it

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...