Quantcast
Jump to content


Hitch Extender

Dan_Lockwood

By Dan_Lockwood
in Coleman UTV SxS Forum

 Share

Recommended Posts

Dan_Lockwood Contributor

Dan_Lockwood

Posted
Posted

As most know, I have a new to me 2021 Coleman UT400.  It has the small receiver for the hitch extension on the rear, but I have NO hitch extender.

What is the part number for the hitch extender and where might I purchase it?

Thanks!

Dan

  • 7 months later...
Rainman Enthusiast

Rainman

Posted
Posted

Not sure if you've resolved your need, but mine came with a small extension, which was useless, because I couldn't hook anything up to it due to burrs that prevented me from attaching a hitch. I would have to had ground the end down to get anything to fit.

Instead, I took it off and attached one of these, which now allows me to use any one of my trailer hitches.

https://www.harborfreight.com/atv-hitch-adapter-65961.html

Now I'm thinking of getting the following so I have 4 options to hookup things to the UTV.

https://www.amazon.com/LOCAME-Hitch-Receiver-GTW-Multi-LC0065/dp/B0BXPCP6X4/ref=sxin_17_pa_sp_search_thematic_sspa?content-id=amzn1.sym.10e6d77b-0012-4a6b-b8f0-1618f27938ee%3Aamzn1.sym.10e6d77b-0012-4a6b-b8f0-1618f27938ee&crid=136E2MUC2MSU&cv_ct_cx=utv%2Bhitch&keywords=utv%2Bhitch&pd_rd_i=B0BXPCP6X4&pd_rd_r=000075c1-753e-48eb-8fe9-1b494445fc65&pd_rd_w=ikLg5&pd_rd_wg=AB2Im&pf_rd_p=10e6d77b-0012-4a6b-b8f0-1618f27938ee&pf_rd_r=2EH7NGCX6YB463Y8CK37&qid=1694653633&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=utv%2Bhitche%2Caps%2C139&sr=1-3-2b34d040-5c83-4b7f-ba01-15975dfb8828-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&th=1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • ToughLuck
      2021 Massimo MXU 1000 Runs Rich
      By ToughLuck
      I have a 2021 Massimo MXU 1000.  Last winter the front drive shaft sheared off inside the motor and it was cheaper to buy a new motor than to take it apart in order to remove the front drive shaft that was broken inside the case…
      Now it is running rich, seems to maybe be geared too high, does not accelerate well once you hit about 28mph.  I’ve replaced the O2 sensor.  MAF is next (I accidentally ordered the wrong one, but when I removed the old one you can clearly smell fuel).  
       I’m not a motorhead but I can turn a wrench.  Any ideas how to get this motor optimized?  The motor has about 300 miles on it.  I broke it in as recommended in the manual. 
    • Homeowner A
      Code Reader for Delphi MT05 Coleman UTV 400 Hisun
      By Homeowner A
      Is there a code reader available for the Coleman UTV 400?  I tried using the HUD ECU Hacker software and cables/adapters but no luck OBD to delphi 6 pin and KKL VAG as well as ELM327.  Will not connect.  I was able to get it to connect randomly a couple of times, but haven't been able to since.  I was able to clear and read the codes briefly.  I'm aware of the Tiny Scan 301 but it doesn't seem to be readily available.  There's a few out there but they are expensive.  
    • FTG-05
      Want a new work UTV; who and what should I look for?
      By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • Grant
      Can’t figure out what part I’m missing
      By Grant
      I recently bought an axis 500 and it’s missing a box or something the plug is L shaped I’ve looked through the wiring diagrams and still can’t figure it out. The plug is located right near the battery housing 

    • Alien10
      Snow Blade for Coleman Outfitter 550?
      By Alien10
      I'm thinking of buying a snow blade for my Coleman Outfitter 550 (Hisun with Coleman stickers).
      Has anyone purchased a snow blade that can offer the make and model they bought and any comments, pros  cons etc.?
      Not 100% sure I'm going to buy, as the selection of blades for this model seems a bit thin on line. 
      Thoughts and comments welcomed.
      Thanks in advance.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...