Quantcast
Jump to content
This Topic


Hitch Extender

Dan_Lockwood

By Dan_Lockwood
in Coleman UTV SxS Forum

 Share

Recommended Posts

Dan_Lockwood Contributor

Dan_Lockwood

Posted
Posted

As most know, I have a new to me 2021 Coleman UT400.  It has the small receiver for the hitch extension on the rear, but I have NO hitch extender.

What is the part number for the hitch extender and where might I purchase it?

Thanks!

Dan

  • 7 months later...
Rainman Enthusiast

Rainman

Posted
Posted

Not sure if you've resolved your need, but mine came with a small extension, which was useless, because I couldn't hook anything up to it due to burrs that prevented me from attaching a hitch. I would have to had ground the end down to get anything to fit.

Instead, I took it off and attached one of these, which now allows me to use any one of my trailer hitches.

https://www.harborfreight.com/atv-hitch-adapter-65961.html

Now I'm thinking of getting the following so I have 4 options to hookup things to the UTV.

https://www.amazon.com/LOCAME-Hitch-Receiver-GTW-Multi-LC0065/dp/B0BXPCP6X4/ref=sxin_17_pa_sp_search_thematic_sspa?content-id=amzn1.sym.10e6d77b-0012-4a6b-b8f0-1618f27938ee%3Aamzn1.sym.10e6d77b-0012-4a6b-b8f0-1618f27938ee&crid=136E2MUC2MSU&cv_ct_cx=utv%2Bhitch&keywords=utv%2Bhitch&pd_rd_i=B0BXPCP6X4&pd_rd_r=000075c1-753e-48eb-8fe9-1b494445fc65&pd_rd_w=ikLg5&pd_rd_wg=AB2Im&pf_rd_p=10e6d77b-0012-4a6b-b8f0-1618f27938ee&pf_rd_r=2EH7NGCX6YB463Y8CK37&qid=1694653633&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=utv%2Bhitche%2Caps%2C139&sr=1-3-2b34d040-5c83-4b7f-ba01-15975dfb8828-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&th=1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • ToughLuck
      2021 Massimo MXU 1000 Runs Rich
      By ToughLuck
      I have a 2021 Massimo MXU 1000.  Last winter the front drive shaft sheared off inside the motor and it was cheaper to buy a new motor than to take it apart in order to remove the front drive shaft that was broken inside the case…
      Now it is running rich, seems to maybe be geared too high, does not accelerate well once you hit about 28mph.  I’ve replaced the O2 sensor.  MAF is next (I accidentally ordered the wrong one, but when I removed the old one you can clearly smell fuel).  
       I’m not a motorhead but I can turn a wrench.  Any ideas how to get this motor optimized?  The motor has about 300 miles on it.  I broke it in as recommended in the manual. 
    • Homeowner A
      Code Reader for Delphi MT05 Coleman UTV 400 Hisun
      By Homeowner A
      Is there a code reader available for the Coleman UTV 400?  I tried using the HUD ECU Hacker software and cables/adapters but no luck OBD to delphi 6 pin and KKL VAG as well as ELM327.  Will not connect.  I was able to get it to connect randomly a couple of times, but haven't been able to since.  I was able to clear and read the codes briefly.  I'm aware of the Tiny Scan 301 but it doesn't seem to be readily available.  There's a few out there but they are expensive.  
    • Grant
      Can’t figure out what part I’m missing
      By Grant
      I recently bought an axis 500 and it’s missing a box or something the plug is L shaped I’ve looked through the wiring diagrams and still can’t figure it out. The plug is located right near the battery housing 

    • Alien10
      Snow Blade for Coleman Outfitter 550?
      By Alien10
      I'm thinking of buying a snow blade for my Coleman Outfitter 550 (Hisun with Coleman stickers).
      Has anyone purchased a snow blade that can offer the make and model they bought and any comments, pros  cons etc.?
      Not 100% sure I'm going to buy, as the selection of blades for this model seems a bit thin on line. 
      Thoughts and comments welcomed.
      Thanks in advance.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...