Quantcast
Jump to content


Recommended Posts

Posted

Went to pull the front axle on a buddy's prowler today,after finding a ripped boot.but the axle had other things in mind,and the shaft came out of the coupler that goes into the diff,I've beat the hell out of it and pryed at it and she won't come out,not even the slide hammer will do it.what should I do?

I will get some pictures later

Posted

The detent ring on the inside of the axle releases by PUSHING IN on the axle then pry out against the diff. It's the wierdest design I've ever seen in my 24 years as a professional mechanic. It takes 2 people usually. One pushing hard straight in as the other prys out like normal.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • By mcraigchr
      Howdy y'all,
      I have the service manual, but it leaves me with questions.
      1)  It is time to change the diff fluid.  The service manual says 80w-90 for the rear and Dextron 3 ATF for the front!  Is that correct?  That seems odd to me.
      2) The service manual also speaks of the need to change the transmission fluid but gives no detail about it.  What needs to happen here?
      3). The service manual also discusses changing the final drive fluid with 80-90 Hypoid.  Is the final drive actually the tranny?
      Any details about the changing of the fluid or what fluid to use ... or even other things that need to be changed that the manual does not mention would be appreciated.
      Thanks,
      Craig C.  
    • By camojay
      When we first heard the noise, we immediately stopped driving it...at first we thought it might be a linkage issue, but after further inspection looks like the sound/jolting is coming from the rear diff. Took a video below...
      Anyone know what is creating the diff to skip/jump like this? We drained the diff oil and didn't look terrible, no metal.
      Other info that may be useful:
      1400 miles on it
      Recently tightened the E brake
      P.s. never posted on this forum before, let me know if the video does not work
      20240817_133539_1.mp4    
    • By GaryC
      Unfortunately my rear Diff housing cracked on my 2013 and I need to replace it or find a good used complete differential.  I think the same one was used from 2013-2016?  Any help or referrals appreciated.  Thanks, Gary  (949)370-2575 (in UT)
    • By Rider
      I have a 2021 Massimo T-Boss 410 and it needs the cv boots replaced.  Has anyone had to replace the boots on their T-Boss?  Does anyone know where to get replacement boots?  Are there boots for other ATV/UTVs that will fit?  The Massimo parts site only sells the entire axles.  Thanks
×
×
  • Create New...