Quantcast
Jump to content


Recommended Posts

Posted

http://www.utvboard.com/topic/3168-joyner-parts-and-all-chery-and-lj276-engine-parts/?p=18349

4wd activator -- rocmoc -- New electric activator
Brake rotors -- rocmoc -- used set of the smaller rotors
Brake Master cylinder -- rocmoc -- New
Differential, rear -- Kinarfi -- Diff is damaged, but I believe it is still serviceable, and I think I did the upgrade, definitely the new bolts.2033865160104282158GxFLMD_th.jpg
Gaskets -- rocmoc -- used intake manifold gasket
Transmission -- rocmoc -- New set of shift cables
Transmission -- rocmoc -- used still good clutch with throwout bearing
Transmission -- rocmoc -- used still good short throw clutch slave cylinder

It should be noted that all parts are not for sale but just an inventory of what our group is hording.

If you have extra stuff others may need or can use. post it I'll move it here, alphabetically, and then delete your post so everything stays on one page. Or you can comment about this idea.
Kinarfi

  • 5 months later...
Posted

Reply and I'll post and alphabetize by main items

Please do not make inquiries on this thread, PM the person, this thread is for part only, if every one asks questions, the meat of the thread will get lost and buried.

Posted

We have 52 differentials fronts and rears of varying models, also complete ring and pinion sets, shim sets, bearings, 20 rear trooper CV driveshafts and 7 renegade rear CV driveshafts, 38 brake calipers loaded with brake pads for the troopers, 10 brake disks, I could go on and on, but thought you guys would need some of this stuff, I will snap and post pictures.. Also 1 transmission new for a 800/1100 Sand Viper, Fenders for the rear of troopers in every color, quite a few fronts, sides, winch plastic fronts

EDIT by Kinarfi -- These are all the new style fenders, From Joyner

Jarrad

(EDIT)

If you want something from Snowman6479, please PM Snowman rather than reply to this post.

Thanks,

Kinarfi

  • 6 months later...
Posted

Reply and I'll post and alphabetize by main items

Hi I have some Tropper 2 parts.

2 used rear fenders red

2 new rear fenders red

2 front stock rims

2 rear stock rims

a complete set of smaller rotors and calipers

a stock rear roll cage that goes over the motor

rear tail lights

I am looking for a rear end less crown and pinion, need spider gear washer and pin

I,ll be heading to Arizona around the 1st of Oct. and could bring parts down as I live in Kamloops BC Canada

Jerry 250-376-7694

  • 4 weeks later...
  • 1 month later...
Posted

" FOR SALE" I have the top & 8 lites for trooper 2, I didn't need the lites, so put on different alum. top. It also has air scoop. can email [email protected] for pics. I live in Idaho, don't know on shipping? would sell lites seperate from top.. ,,,,,,Quig

Posted

I"m interested in 1 front rim (for a spare tire), do you still have one? What's the price?

I have one rear rim that has a little more off set . It should work for the front. It would work to get you home as long as you are not jumping the buggy.The stock rims are a full set and do not want to break them up. I want fifty dollars for the rim . I believe it is a ITP rim. Sorry about the delay in replying as I was on the road. Jerry

  • 2 months later...
  • 3 weeks later...
Posted

Thats the color of my t2. I have all the fenders if your still needing them.

Hi guys just letting you know I have some extra parts if any ones interested 1 green camo hood for a commando new $100.00 ,one renegade dump bed new $150.00 ,one new trooper steering box has the play in it $35.00 ,one new alternator for the commando $80.00 ,one new digital dash for the commando $45.00 ,two complete taillight assemblies fits all $25.00 each ,and one set of soft doors for the commando new$60.00. If any one interested you can pm me. THANKS

  • 2 months later...
Posted

Not sure if this is the place to post this information, but I found it quite useful.

I was trying to find some auto rims that fit the Joyner and came accross this site: http://www.roadkillcustoms.com/hot-rods-rat-rods/Wheel-Bolt-Pattern-Cross-Reference-Database.asp?LugCount=5&StudSpreadInch=4.5&StudSpreadMM

I was looking for rims with a 4/114MM or 4.5inch bolt patten, I found several wheels that would work. The site has other useful information.

Hope y'all find it as informative as I did.

Dick

  • 11 months later...
Posted

I have the take-off coil-over shocks from the 650 Sand Spider, as well as the take-off winch, and the take-off air cleaner, carb, and intake.

I also got a screaming deal on Dorman universal CV boots, but I had to buy 12, so 8 are extra.

  • 3 months later...
Posted

I am looking for some ball joints for the front of the trooper. None of the distributors have any in stock and they are still 2 weeks out. Let me know if you have any laying around. Thanks

Posted

I have two Headlight glass one with bulb one without. In good shape. I replaced mine with sealed beame instead cause I got tired looking for a halagen bulb...LOL I will post the new sealed unit number later...It is a VW I think it is a 5000 series 2 headlight car has high and low beam fits perfect.......Will sell the 2 to someone that is staying original..

  • 3 months later...
Posted

Sorry for the multiple posts to different threads....I should have posted here first.

Here is what I am in need of. JMC will have parts in Jan, but it is riding season and would like to get the Trooper up and running earlier...

Ref #. Part#. Description. Qty

1. QR512---1701101. Clutch case 1

2. 4T08A1---1701111. Transmission Case. 1

29. QR512---1701710. Reverse. Gear. 1

46. TR1100.03.03.02.00. Rear inboard slip drive. 1

  • 11 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Frank in MI
      Thanks for accepting me!
      Haven't got a side by side yet, but have been shopping.   
      Any advice welcome & I am on a limited budget, so haven't decided yet on new or used.
       
    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • By tskm
      in desperate need of a rear differential for my 2014 wildcat 1000. It has blown up right in the midst of the hurricane that struck us here in N/W N.C. I could really use this machine right now. No luck finding this from Artic Cat or the many numerous online vendors. Any info or resources wil be greatly appreciated !
      Tom 
    • By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


×
×
  • Create New...