Quantcast
Jump to content


Electric choke issue???

Jocelyn Chiasson
 Share

Recommended Posts

Jocelyn Chiasson Newbie

Jocelyn Chiasson

Posted
Posted

I just bought 3 ATV 90 cc tracker off road for the kids a couple days ago and we’ve been having 0 degree to -2 degrees for the last few days and all 3 quads won’t start at all I’m suspecting the electric choke being the issue as it may not be cold enough for full choke but to cold to start so my question is on a 2022 90cc tracker off road is it possible to remove the electric choke and replace it with a manual one?

Ben1098 Enthusiast

Ben1098

Posted
Posted

Jetting for the fuel enriching circuit ("choke") too small.  Older Honda had the same problem resulting in a LEAN spit backfire that took out the starter drive gear teeth.....which attached to the flywheel magnets and shredded the stator and the SS liner and thus knocking off the magnets.  Using a copper wire to see-saw the jet opening usually opened up the jet enough.  Small # drill bits are usually too agressive on opening the jet up.

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Clayton Walker
      Im New here but just got my Uforce Fitted for Hunting Season
      By Clayton Walker
    • BMurph
      2021 Axis 750 crew having shifting issue and found milky oil
      By BMurph
      Hi everyone. I am new here to the forum and am excited to learn from all of you with more experience than me with UTVs. Our Axis750 we use on the hobby farm started to have some issues going into gear. Yes, foot is on the brake and completely stopped as required with these machines. I thought it was the linkage and adjusted it to where it is accurately shifting with the engine off and key in the on position. I start the engine and it won't shift gears (yes foot is on the brake). I thought maybe it was the shift lever teeth so I opened the assembly and this picture shows what I just found. I assume this means the wet clutch would need replaced too while draining and flushing the oil. What else should I consider or be looking at? Any idea what could cause this? I don't see visible leaks or cracks in the system anywhere. Thanks in advance for the help!
       
       

    • TexAcoon
      2015 Massimo 550 Throttle Position Sensor issue
      By TexAcoon
      I'm looking to purchase a 2015 Massimo 550 that might have an issue with it's throttle position sensor.   
      From the fella selling this UTV, he claims its to set the idle on fuel injection because the engine will not stay idle or when it starts sometimes it idles too high.
      My Question if anyone had any issues with their Massimo 550 and if it was actually the TPS or something else that would allow the machine to idle correctly.
      Thanks!
       
    • JDawg
      2019 750 Challenger won't start...
      By JDawg
      Was using the machine all day to haul wood...no issues until the end...
      When I try to start it, the dash lights come on but starter does not...seems like no power to the starter.
      It is in park, but when I put the brake on to start, it registers N.
      Won't start in neutral either...
      Tried rocking it, did not help...
      Help...
    • Michigan sport.
      Michigan Emergency Brake Road legal Requirement.
      By Michigan sport.
      I'm sure many of you are aware of Michigan's emergency brake requirement.  I'm wondering if anyone has a good solution. 
      Beyond paying the few fab places $$$$.. I'm curious is there another rear caliper with e brake style that would interchange with slight mods to  the Maverick sport rear mounting bracket?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...