Quantcast
Jump to content


Recommended Posts

Posted

Hi, never had a need for a UTV but we do now. Looking at one from UTVdiscounters. anyone have feedback on this company? or need some recommendation...cost is an issue, don't need 4x4. need to haul wood and a spliter. thanks

Posted

Hi JeffC, I deal with Joyner UTVs but given your needs with only 2wd the Kawasaki 2010 Mule 600 if your buying new. Two added bonuses with this Mule is the wire barrier protecting you from firewood coming through to the cab area if you stop suddenly or go down a steep hill and a LSD diff that can be fully locked to help you get out of the mud in winter. http://www.kawasaki.com/Products/product-s...d=15&id=393 If your buying 2nd hand look at some of the 4wds as they will be superior to 2wd with hauling heavy loads. You will need 4wd with very heavy loads going up or coming down slopes regardless. There is a brand new Joyner Commando 4 seater on E Bay that is a bank repo item number 320437706089 that's only up to us$2025 (MSRP: $9500)as of today that ends in 6 days. That's got to be worth a look.

Cheers & happy shopping, Mike.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By CSM_Retired
      This is for all of you Kioti Off-Road UTV, SxS (Side by Side) owners. Discussions about Kioti Off-Road specific topics including the Kioti Mechron, K9, 2400, and 2440 models. 
    • By Homeowner A
      Is there a code reader available for the Coleman UTV 400?  I tried using the HUD ECU Hacker software and cables/adapters but no luck OBD to delphi 6 pin and KKL VAG as well as ELM327.  Will not connect.  I was able to get it to connect randomly a couple of times, but haven't been able to since.  I was able to clear and read the codes briefly.  I'm aware of the Tiny Scan 301 but it doesn't seem to be readily available.  There's a few out there but they are expensive.  
    • By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • By Steve Waldner
      Looking to buy a Kioti Mechron 2200
    • By D MAYNARD
      I have an Axis 500 4x4 UTV that I was given.  It looks like an almost new machine with 39 hrs on it however it was apparently under water from the hurricane . I have no spark at the plug. I have replaced the plug, the plug wire, & the stator so far. Can anyone advise me of what i need to check and or replace to get this thing running? Any advise would be greatly appreciated. 
                                    Thank You,
                                  D Maynard 
       
×
×
  • Create New...