Quantcast
Jump to content


Starter for 2019 Massimo Buck 400


Go to solution Solved by Howard B,

Recommended Posts

  • Alex changed the title to Starter for 2019 Massimo Buck 400
  • 2 weeks later...
  • Solution
Posted

I actually had to go thru the massimo dealer themselves, then they sold me a massimo buck 450, come to find out that there the same as the 400.

Posted

Thanks, Howard. I called Massimo direct today. The tech guy said call Partsboss because Massimo corporate didn't have the part.  Okay  so I called Partsboss. They said call Massimo. I said they told me to call you. They said, oh, we are not handling Massimo parts. Sooo, that was how my day went. Howard, if your dealer has my part  let me know, I will have you Knighted in the Kings Court. Remember folks, this is a 4 year old vehicle.

 

 

 

Posted

Hi Mitch, Howard here, I talked to my tech, go to the website I gave you yesterday and go to the 450 buck, it should show you all the schematics, go to electrical #2, it'll be called a starting relay(solenoid) that's what you'll need for your massimo. 400 and 450 are the same, except bore size. the rest is all the same.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Homeowner A
      I have a Coleman UTV 400 and looking for something to store it in.  Preferably something vinyl or plastic with its own base that can stand alone outside and house the UTV.  I think the dimensions of the UT400 are around 106" long 52" wide and 74" tall. 
      What should I consider that won't break the bank?    
    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By JOSEPH LAMAR
      I have a 2020 axis 500 and I have replaced the TPS twice and the whole throttle body assembly once and still have code 122. I can barely drive the thing. It bucks and surges like crazy
    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By Texjpr
      2002 ranger 500 4x4 stopped running and wouldn't restart. Service manual wiring diagram helped identify the hub safety switch as the culprit. Using jumper wires to bypass  switch allowed the engine to start and run normally. Inspection of switch showed melted epoxy and a strong smell of burnt electrical. Unable to find replacement part either used or new. Is there a work around other than jumper wiring?
×
×
  • Create New...