-
Similar Topics
-
By mark walkom
the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
-
By blacktrain
Replaced the injector, now when I turn the ignition on you can hear the fuel pump like normal but when the engine turns over it seizes up, pull the spark plug out and the cylinder is full of fuel, a lot of fuel, turn the engine over with the plug out and huge amounts of fuel blows out of the plug hole. What have I done wrong? I appreciate your help, thank you!
-
By Joel Goldsney
Wasn't sure exactly how to title this thread as I have a few issues with my newly acquired hisun UTV. Hopefully going to consolidate all the issues in one thread.
I purchased from a guy who had rebuilt the engine replaced the fuel pump as well as re-done the front end. He had the unit running and driving when it quit and would not start. He got frustrated and decided no more projects and sold it to me. Unit is in excellent condition physically.....hardly any scratches on the plastics. All in all its a good unit with the following issues/symptoms
1) Mis fire and stalling out when revved
Well as you can see by the title of the first issue I managed to get the unit running. Seems that the battery was very weak. I charged the unit and it fired up fine. The engine seems to stutter and misfire when revved and once the unit warms up it stalls out. I think it's a fuel issue as if I give it a shot of ether it starts back up.
Additional Note: Revving engine in Neutral seems to cause indication to flicker and occasionally the reverse light comes on which seems to kick in the reverse rev limiter. Have also hade this happen when driving around. Reverse Light flickers and revs get cut.
2) Fuel line configuration.
When he replaced the fuel pump he got creative with the tubing and removed the "small fuel tank"
(See pictures)
Not sure what the purpose of this tank is but would love some pictures of a stock set up so I can put everything back together correct.
3) Issues engaging in gear
The unit seems to have issues going in to gear...I will move the shifter in place but the gear won't engage and the lights don't indicate correct. It takes a few tries to engage and sometimes it grinds a bit
4) Rack and pinion slipping
This problem is probably a simple replacement fix...when turning to the right with the vehicle not moving the steering just slipps and turns without turning the tire. I believe I just need to replace the rack and pinion but if there is something else please let me know.
Any insight or tips on resolving any of these issues would be much appreciated.
-
By Hisun .500
So my hisun 500 is tore up and all the wiring is wasted i was wondering can i pull out all the wiring and just put in the. Basics .please help
-
-
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now