Quantcast
Jump to content


Recommended Posts

Posted

I'm looking at getting a UTV for hunting, and trail riding. I like the Polaris ranger, but have heard of alot of problems with the belt on the cvt. The Trooper T2 looks real good also, but what's the difference in model years? Should I get a used one with low hours, or save for a new one? Is there any way to get more than 2 people in one? I hunt in South Dakota 8 days a year for vacation, and would like to be able to carry 2 or 3 other guys. I don't want a T4, it seems to long for trail riding in the East, which is what I want to do most of the time.

Posted

Get the lastest/newest you can find. There has been upgrades and changes from the first 50, I have one of the first 50, as most changes have been for the better. Don't get an older one unless you get a really good price because you will have to do a few mods. Good luck! I am too lazy to mention all the changes.

rocmoc n AZ/Mexico

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Cory J
      Belt started slipping when I used it in high gear. It works okay in low unless I'm trying to power it up a hill and then it slips.., Ordered a new belt and went to change it and found a good bit of oil in the belt housing. Has anyone experienced this? Belt looks fine. Only have 300 miles on this thing..
    • By Nutcase
      I have a Joyner Trooper 1100 4 place that has been sitting for a number of years. I have everything taken care of but i can't get the fuel through the injectors. Fuel pump puts full pressure on them but they don't turn on or spray fuel. Any ideas?
    • By Howard Elmore
      I have owned mine for a couple years now but newer took off road.  How well does it do trail riding m?
    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By Polish DIY Lover
      Hi i'm jakub and i making DIY UTV. Some questions?
×
×
  • Create New...