Quantcast
Jump to content


Joyner parts


CYJSP2009

Recommended Posts

Dear Joyner owners

Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])

Currently, we have supply below parts: 

1.  cv axles, cv rebuild kits, cv boots

2.  Differentials and differential ring and pinion set

3. Cables, 

4. Brake parts

5. Engine parts

6. Other parts

We will provide better price, close follow up ... 

We can arrange productioni for parts that we can collect demands from customers  

Have a good weekend

Casey /  Leaf Asia 

2023-11-17

 

Link to comment
Share on other sites

On 11/18/2023 at 8:11 AM, Nutcase said:

I would be very interested in knowing what parts are available and the cost. Do you have any kind of inventory sheet and phone number or active email that you can be communicated with.

Hi Nutcase, 

Thanks for you comment. 

Please send me email at [email protected] and cc to [email protected] ( [email protected] was my daily email address before. But by feedback from customers, this email may not work sometimes). So, to make sure what customers can receive my emails, I hope that all of you kindly always send to my hotmail at [email protected] or CC to this hotmail address. 

As per the parts available. I am working on a updated list. I will send it here later. 

For what you need, please send me email first. I will check and reply you. 

Thanks

Best regards

Casey

2023-11-20

Link to comment
Share on other sites

Differentials and differential ring and pinion set

  Rear differential for 650 CC Joyner buggy

  Ring and pinion set for 650 CC Joyner buggy rear diffential

  Rear differential for 800 Renegade 

  Ring and pinion for Joyner 800 Renegade

  Rear differential for Trooper 

  Ring and pinion set for Joyner Trooper rear differential

  

Link to comment
Share on other sites

12 hours ago, Nutcase said:

I need to replace my left rear axle and hub on my t2-1100 trooper. What is cost and availability.

Hi Nutcase, 

The cv axle for Trooper is available. I don't have hub.  Please refer to below product photos. 

USD250 ship to door ( shipping included). If you confirms to buy, please send payment to my Paypal account ( [email protected]) and leave your shipping address with phone number ( for carrier to reach you in case needed). I will arrange shipment once payment arrives and send you tracking number ( so please let me know your email) 

Hope this clarifies. 

Thanks 

Best regards

Casey

2023-11-26

TR1100.03.01.03.00-1.jpg

TR1100.03.01.03.00-2.jpg

Link to comment
Share on other sites

  • 3 weeks later...

Dear friends,

We'd like to offer below parts special price for 3 months

1.  Carbureto 270Q-13000r: USD120 / piece shipping included.

2. Fuel pump D1600.04.03.02.00: USD60/ piece shipping included.

3.  Front CV Axle ( Both front left and front right ) for Joyner 650 Commando: USD120/ piece shipping included

4.  Rear CV Axle for renegage 800: USD120/ piece shipping included

Any interested party please send email to [email protected] and [email protected]

Casey /  Leaf Asia 

2023-12-15

Link to comment
Share on other sites

Dear friends, 

Parts that Leaf Asia sells are original parts

We received good reviews from Amazon customers as below attached screenprints. 

We are now selling by ourselves ( not on Amazon). 

If you need Joyner parts,please contact me at [email protected] and [email protected]

Thanks 

Casey /  Leaf Asia

2023-12-15

 

Carburetor.amazon.jpg

D650.07.04.01.00.amazon.jpg

Joyner transmission output shaft.jpg

LF-238-N.amazon.jpg

S11-3708110BA starter.amazon.jpg

S650.07.03.01.00-4S .amazon.jpg

S650.07.04.01.00.amazon.jpg

S650.7410.amazon.jpg

S800.07.03.01.00-R4.amazon.jpg

Trooper rear differential.amazon.jpg

Link to comment
Share on other sites

  • 3 weeks later...

Dear Friends, 

We offer one Trooper rear differential  (UPS shipping included). The rear differential is now locate in South Carolina. 

Fuel pump (D1600.04.03.02.00), Carburetor ( 270q-13000) and cables are available at lower cost. Beside, brake parts are also available. 

Welcome sending email to [email protected] 

 

Casey / Leaf Asia 

2024-01-05

 

 

Link to comment
Share on other sites

  • 1 month later...
On 11/24/2023 at 8:49 AM, CYJSP2009 said:

Differentials and differential ring and pinion set

  Rear differential for 650 CC Joyner buggy

  Ring and pinion set for 650 CC Joyner buggy rear diffential

  Rear differential for 800 Renegade 

  Ring and pinion for Joyner 800 Renegade

  Rear differential for Trooper 

  Ring and pinion set for Joyner Trooper rear differential

  

Need a Ring and pinion set for 650 CC Joyner Commando 4x4.  Can you please send me a price?

Link to comment
Share on other sites

7 hours ago, ckproctor said:

Need a Ring and pinion set for 650 CC Joyner Commando 4x4.  Can you please send me a price?

Hi CKPROCTOR, 

Thanks for inquiry. 

The ring and pinion set for 650 Commando is available.  Please refer to the email I sent to you from [email protected] and talk with me. 

Thanks 

Best regards

Casey / Leaf Asia 

2024-02-13

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 1 month later...
  • 1 month later...

My grand nephew took my trooper out and stalled it on a hill and it rolled backwards spinning the motor backwards and now the throttle will not drop below 2500 RPM. Can the butterfly snap backwards on the trooper causing damage to it when the motor gets turned backwards? Any ideas?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • By Ridge Runner
      Hi
      i have a 2019 Coleman 550 Outfitter.  The tail gate has a pin on each side, that snaps into latch blocks that are mounted on the inside of the tail gate opening.  There are two M6x16 pan head screws(bolts?) that hold the latch blocks in place.  The screws enter from inside the bed body, and I can’t figure out how to access them.  This is right by the tail light assemblies.  I tried taking a pan head screw out of the fender lip, but found out there is not a nut firmly inplace, to hold the pan head screw in.  Bottom line I’m making it worse.  
      coleman was no help.  If I could figure out how they attached the tail light, then maybe I could put the latch screws in through the tail light hole.  Any ideas?
       
      thanks
      Ridgerunner
    • By Brett
      Fuel injected 700 starts great and idles great but touch the gas and it dies
    • By Jon Spruill
      Hey Guys, I have been chasing a stalling condition for about two weeks now. The bike will crank up and idle fine, then after about 20 seconds it will fall on its face and stall. It happens at both idle and while running at various rpms. You can turn the key off, turn it back on and it will fire right back up without trouble. I have verified spark on both cylinders with a spark tester. I have also added an inline fuel filter, and pulled the injectors to verify proper pulse on each. Things I have replaced - (relearn procedure performed after each component replaced): spark plugs, ECU, relay/fuse box, fuel pump, & throttle position sensor - all with no improvement of the condition. The only warning light I get when the condition occurs is the oil lamp. The bike only has 14 miles. I am at a loss and appreciate any help and suggestions! Thanks
×
×
  • Create New...