Quantcast
Jump to content


Recommended Posts

Posted

Recently purchased a 2020 Tracker 800SX. Found it on Facebook Marketplace in Denver Colorado for $11,800. It’s a one owner machine with 186 miles and 36 hours.

It has the following options installed:

TRAIL KIT - 2436-97 $1810 (POLY HARD TOP 2436-649, REAR HARD COAT POLYCARBON[1]ATE WINDOW 2436-623, FULL HARD COAT POLYCARBONATE WINDSHIELD 2436-618, CENTER REARVIEW MIRROR 2436-630)

BACKCOUNTRY KIT - 2436-972 $1592 (BRUSHGUARDS 2436-632, GRILLE GUARD 2436-631, WARN VRX 45 WINCH 10002695, WINCH INSTALL KIT 100008510, REAR BUMPER 2436-633)

These two option kits together run $3402 plus installation and tax. So, the basic Tracker 800SX by itself ended up costing me $8398. It has 26x10-14 tires all the way around.

I plan to use it mainly as a workhorse on my 3-acre place 6 miles east of Cheyenne and as something I can take to town on the county roads if the need arises. Plan to purchase a KFI 72-inch steel snowplow, soft (or diy hard doors), wiper kit, side mirrors, street legal kit, back up lights, and a pull behind rough cut mower. Checked with DMV as to registering it as an MPV and they said plates would run $125. Its secondary use will be a hunting rig, 

Tracker 900 3 quarter.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • By Cory J
      Belt started slipping when I used it in high gear. It works okay in low unless I'm trying to power it up a hill and then it slips.., Ordered a new belt and went to change it and found a good bit of oil in the belt housing. Has anyone experienced this? Belt looks fine. Only have 300 miles on this thing..
    • By Howard Elmore
      I have owned mine for a couple years now but newer took off road.  How well does it do trail riding m?
    • By NC4wd
      Has anyone found a lift kit that fits an Axis 500? Mine is a 2021.
    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
×
×
  • Create New...