Quantcast
Jump to content


LSR MTS kit with 3 way adjustable Elkas

cjkranz
 Share

Recommended Posts

cjkranz Newbie

cjkranz

Posted
Posted

I am buying a 660 rhino with a like new LSR MTS kit on it. The shocks are Elka Elite (fully adjustable). The original owner bought them with the thought of running them in the hills and trails but this never happened. Instead they have driven the rhino on the street only. I am going to put a LT kit on it (dunes only) so I am putting the kit up for sale. Lone Star Racing has the kit on the website for nearly $6,000 new.. Asking $3500 OBO for the full kit. I would also sell the MTS kit and shocks seperately. The shocks alone are nearly $3300. They will also fit on a stock a-arm if desired. The kit is currenlty on a 660 rhino but I have been told it will also work on a 700, but please verifyon your own this before buying. I can get pics if requested. [email protected] or 620-727-0407 with any questions and/or pics.

post-469-1260309603_thumb.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • FTG-05
      Want a new work UTV; who and what should I look for?
      By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • SpaceGhost
      New guy with new (to me) machine
      By SpaceGhost
      As with any forum you join, there is a requirement for an obligatory introduction... and that seems fair. How else do you get that first post in there without jumping in with some stupid question right out of nowhere?

      Hi. I'm Space Ghost. Well, not really, but that was my call sign on my last deployment before an IED made me non-deployable, and I an now retired/disabled, and living on my wonderful VA disability. I did almost 28 years in total between the Army, Army Reserve, and National Guard. 1 deployment with the Reserve (Desert Storm) and 3 with the Guard (1 pre, and 2 post 9/11)

      Married (going on 30 years) one of each. (both out of the nest)
       
      Just picked up my first side by side a couple days ago. A 2020 Can-Am Defender HD10 DPS 6x6. 

       
      It's in pretty good shape, but as you can probably tell, it's sitting a bit high. Former owner put a lifting collar on the shocks. 

       
      The good = almost 17" of ground clearance. (30" tires) 
      The bad = incredibly steep driveline angles, and a pretty stiff ride. 
       
      They will be coming off. 
       
      Other than that... clean as a pin and appears very well maintained. 
       
      Looking forward to seeing what this forum can bring, and hoping I can bring something in return. 
    • downseast
      2020 T-Boss 410 running problems
      By downseast
      Hi everyone
      Recently purchased a 2020 T-Boss 410 in what appears to be good condition
      First time with this machine – I also have a diesel Kawasaki Mule which so far seems a better machine
      It didn’t start and idle well particularly from cold when I got it and sudden take off ( now solved with new clutch parts ) was all or nothing !
      I have replaced the idle valve, throttle position sensor, had the injector professionally checked ( ok) and also the pressure sensor this is a fuel injection engine, also plug and lead etc!
      It still doesn’t run well and when starting I have to hold revs for a while as it wont idle but stall, thereafter its better and I have rebooted the ecu which has improved it
      When I go to start it clicks as if there is a hydraulic lock and wont return after two or three attempts it then does turn over and start bit I need to give it a bit of throttle to start – is this normal ?
      Is there adjustment for the air idle valve ?
      The engine seems rough and with vibration compared to other engines I have been used to but some say this is normal?
      I haven’t changed the Lambda sensor yet, anyone know how much difference this might make ( I have a new Bosch universal to fit )
      Any advice very much appreciated, thanks
    • CRV
      Hello .. I have a 2007 cub cadet big country
      By CRV
      I’m need a couple parts. Diff. Lock Actuator mainly. But I would like to find a donor that maybe has bad motor or something along those lines. 
      if anyone has or knows of anything please holler at me 
      thanks Randy 
    • Prepper
      New member from Eastern Kentucky
      By Prepper
      Hello All...
           Just bought a 2014 Massimo 500 UTV.  It;s not running at the moment, but hopefully will soon.  I need a seat for it also (passenger side, if it makes any difference.)  It is a crank-but no start situation.  Just now starting to read the boards for solutions.  Apparently these models are well known for this issue.  If anyone has any suggestions, please feel free to chime in, it would be greatly appreciated.
      Thanks 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...