Quantcast
Jump to content


Recommended Posts

Posted

Hi

I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. IMG_1137.thumb.jpeg.28bcd42ebf6fc05c1c5a203e85b6960f.jpegIMG_1137.thumb.jpeg.28bcd42ebf6fc05c1c5a203e85b6960f.jpegIMG_1138.thumb.jpeg.2cc4c00fa3e92c57f643e939462a3f46.jpegIMG_1139.thumb.jpeg.af69614ed2870eeeebab64e8c56edaf6.jpeg

Posted

Hi

I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. IMG_1137.thumb.jpeg.5f354c3c8c0a99dabdd468363f7018ee.jpegIMG_1138.thumb.jpeg.a362d65ec8d7285cf9169538cff061c3.jpegIMG_1139.thumb.jpeg.1a83a5e3798dd817326355cdf023e6bd.jpeg

Posted

Hey, thanks for the info. My 22 rk 750 has had no eps since about April or May, just turned dead left if you let go of the steering wheel. No help at all from hisun in Texas other than tell me to take it back to rk after the mechanic had already  told me twice he had no idea what was wrong with it. Had to have a starter replaced at another dealer closer to home and they said they would check on hisun fixing the eps.  Been about 2 months and haven't heard anything. It's a decent sxs when it works but I would advise anyone to buy another brand and save a huge headache.  Where is the diode located and does it just plug in? Thanks for the info. Sorry you're in the no eps club.

 

Posted

Hey the diode is in the eps module. And it has to be desoldered. Module is located behind the airbox. It’s the one with three plugs on it. Is your power steering malfunction light on ? 

Posted

It does have a code, F0001 and the red steering trouble light is illuminated on the instrument panel. Did your steering wheel turn all the way one way or the other when you let go of the wheel? Mine turned all the way to the left. I called and tried to buy a service manual not long after I bought mine in 2022 but hisun in Texas wouldn't sell me one. Dealers and authorized repair shops only. Paid over 400 to replace the starter because it dragged all the time. Rk mechanic said they all start that way. Any help would be greatly appreciated. And thanks for the info.

  • 9 months later...
Posted
On 12/16/2023 at 2:28 PM, Greg Hall said:

Hey, thanks for the info. My 22 rk 750 has had no eps since about April or May, just turned dead left if you let go of the steering wheel. No help at all from hisun in Texas other than tell me to take it back to rk after the mechanic had already  told me twice he had no idea what was wrong with it. Had to have a starter replaced at another dealer closer to home and they said they would check on hisun fixing the eps.  Been about 2 months and haven't heard anything. It's a decent sxs when it works but I would advise anyone to buy another brand and save a huge headache.  Where is the diode located and does it just plug in? Thanks for the info. Sorry you're in the no eps club.

 

Wow!!!  Our new-to-us Sector 750, with only 84.4 hours, is doing exactly the same thing.  When you turn the ignition key, the EPS turns hard all the way to the left.

I am in discussion with "Chris" from HISUN . . . I have his email and phone number . . . and with the original selling dealer.

I have sent a short video clip to both of them, showing what happens when I turn the key.

There is no dealer convenient to us and "taking it in" would involve renting a UHaul carhauler.  I have also read horror stories from people who took their HISUN in to a dealer to get a defect fixed.

I'm treating it as a consumer product safety defect, and have reported it to the Consumer Product Safety Commission . . . 20240920-18A7C-2147336406 .

I stumbled onto this thread when I searched if a HISUN can operate with the EPS disconnected.

Our previous UTV, a 2008 Bush Hog TH440, was not a pretty thing, but it was not a death trap!!!!!!

Posted
2 hours ago, HISUN Sector 750 EPS Failu said:

Wow!!!  Our new-to-us Sector 750, with only 84.4 hours, is doing exactly the same thing.  When you turn the ignition key, the EPS turns hard all the way to the left.

I am in discussion with "Chris" from HISUN . . . I have his email and phone number . . . and with the original selling dealer.

I have sent a short video clip to both of them, showing what happens when I turn the key.

There is no dealer convenient to us and "taking it in" would involve renting a UHaul carhauler.  I have also read horror stories from people who took their HISUN in to a dealer to get a defect fixed.

I'm treating it as a consumer product safety defect, and have reported it to the Consumer Product Safety Commission . . . 20240920-18A7C-2147336406 .

I stumbled onto this thread when I searched if a HISUN can operate with the EPS disconnected.

Our previous UTV, a 2008 Bush Hog TH440, was not a pretty thing, but it was not a death trap!!!!!!

Today I intended to try to figure out how to disconnect the EPS, and see if it would operate without power steering, but, instead, the EPS was working.

I drove it apprehensively for about 15 minutes, both hands firmly on the steering wheel, and it never jerked to the left.

But I don't think I can ever drive it without the fear of it doing that.  I certainly won't drive it with speed.

 

BTW, I'm seeing what appears to be that EPS system on Amazon for $1190-ish.

  • Sad 1
  • 2 weeks later...
Posted

HISUN arranged to have our Sector 750 picked up and transported back to the original dealer, and are paying for that, parts and labor.

I doubt that they would be if I had not filed a report with the Consumer Product Safety Commission.  People have complained about the same issue with the Texas BBB where HISUN is located, and got no satisfaction.

It was picked up early yesterday>>>>I test-drove it for a couple miles first, and the EPS was operating just fine.  That's always a possibility, which is why I have made three separate videos documenting the issue.

  • 2 weeks later...
  • 4 weeks later...
Posted

We got it back, and it seems to be working just fine.  Neither HISUN nor the dealer said what was wrong.

- - - - - -

I decided to do an oil change, and could not even budge the oil drain plug.  I bought an impact wrench yesterday and I couldn't budget it with that.  I couldn't loosen a lug nut either.

Everything on it is way over-torqued.  It's not right.

I'm getting a bigger impact wrench today.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By JSwearer
      Does anyone have any suggestions for aftermarket shocks.  I have a T-Boss 550 and took it riding in some rough trails and the stock suspension was uncomfortably rough.
      Thanks
    • By NC4wd
      Has anyone found a lift kit that fits an Axis 500? Mine is a 2021.
    • By Justine
      I've had a Hisun Vector E1 for just a bit longer than is required for me to do some maintenance. While it's well-overdue, it only drives 1.5km a few times each week on a fairly decent gravel road (to the letterbox), and it has worked really well right from the get-go.
      Looking at the manual it states that I need to use SAE80 API GL-4 Hypoid Gear Oil for the Main gear Case, and SAE80 API GL-5 Hypoid Gear Oil for the Front gear Case - unfortunately i can't find either of those online here in Australia. Plenty of options that look close, but, as someone who has never driven any vehicle before, I want to use the right thing and it's a tad confusing.
      My question: Since there are no oils that are bang on SAE80 (they all seem to cover a range) would Liqui Moly Hypoid GL4 Gear Oil 80W-90  & Motorex Hypoid GL-5 Gear Oil 80W90 - be ok to use? (Or any other suggestions of what I might be able to purchase online in Australia) And would I have to drain out any existing oil from both gear cases?
      This is a whole new world for me and  being able to find exactly what is specified in the manual hasn't made this easy!
    • By Howard Elmore
      I have owned mine for a couple years now but newer took off road.  How well does it do trail riding m?
    • By Will Sutton
      I've got a 2023 UT400 (bought from tractor supply) and I've been beating my head against a wall with it.
      It will start and idle perfectly. The second I touch the throttle it sputters and dies.
      I've checked that the fuel pump is working  (it is).
      I've replaced the injector, throttle position sensor, O2 sensor, and intake air sensor. All with no change.
       
      I've just taken a look a the schematic, and there is a crank position sensor as well.

      Could this be the source of my troubles? If so, where is this thing located? I can't seem to find it on any drawings from the parts suppliers.
×
×
  • Create New...