Quantcast
Jump to content


2022 Axis 700 Stalls after cranking

Grizz

By Grizz
in AXIS Off-Road UTV SxS Forum

 Share

Recommended Posts

Grizz Rookie

Grizz

Posted
Posted

Hello I have a 2022 axis 7004x4 Utv after about 6 months it would start fine but sometimes it would stall and you have to crank it again and it would run fine I am wondering what causes this does anyone else have this problem. Thanks 

  • Alex changed the title to 2022 Axis 700 Goes dead after cranking
  • Alex changed the title to 2022 Axis 700 Stalls after cranking
Alex

Alex

Posted
Posted
Just now, Grizz said:

Why are you changing my title

Because it was missing the machine info and you posted two topics that were the same. I combined them into this one for you.

Greg Kilgore Collaborator

Greg Kilgore

Posted
Posted

Try resetting the computer.

Turn key on/off 5 times within 30 seconds. Making sure you hear the fuel pump kick on each time.

After the 5th time, leave off at least 30 seconds. See how that works for ya.

 

Could try changing fuel filter. My OEM filter had paint chips inside it.

 

Could try replacing the fuel injector. ( I still need to do that)

 

Try cleaning the air filter. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • SouthernGypsy
      Help needed, Anyone recognize where this Internally Threaded Bolt belongs?
      By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • NC4wd
      Axis 500 Lift Kit
      By NC4wd
      Has anyone found a lift kit that fits an Axis 500? Mine is a 2021.
    • se3388
      Anyone else with a UT10X?
      By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • A P
      2022 Hisun Sector 550 eps. Power steering not working
      By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • Will Sutton
      Coleman UT400 won't rev. Idles fine
      By Will Sutton
      I've got a 2023 UT400 (bought from tractor supply) and I've been beating my head against a wall with it.
      It will start and idle perfectly. The second I touch the throttle it sputters and dies.
      I've checked that the fuel pump is working  (it is).
      I've replaced the injector, throttle position sensor, O2 sensor, and intake air sensor. All with no change.
       
      I've just taken a look a the schematic, and there is a crank position sensor as well.

      Could this be the source of my troubles? If so, where is this thing located? I can't seem to find it on any drawings from the parts suppliers.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...