Quantcast
Jump to content


2006 cub cadet pulley system, 4wd Trail 20 hp kohler model 37ac466d710

Dave P

By Dave P
in Cub Cadet UTV SxS Forum

 Share

Recommended Posts

Dave P Newbie

Dave P

Posted
Posted

Bought a used 4x4, engine runs. Tried rebuilding both pulleys. Ended up buying a transmission pulley system. The new one is aftermarket. The old one wallowed out and fell off.

The new one seems not to have enough splines inside. Seems like it is freewheeling. When it revs up and gets smaller pulley diameter, does it jump on the spline shaft? The driver pulley on the engine gets larger when it revs up. Had to make a pvc collar for the belt to sit on in the grove. No parts for sale on this pulley. Is the belt supposed to sit at the bottom? There must be a trick to get the belt on. Any ideas?

 

Thanks Dave in Florida

 

 

Dave P Newbie

Dave P

Posted
  • Author
Posted
On 1/19/2024 at 8:11 PM, that guy from Canada said:

Belt install on most CVT transmissions reqires primary or engine pully to be removed or disassembled. 

Do you have pictures of this pulley system your description has me confused 

Attached

IMG_20240120_102400855.jpg

IMG_20240120_102449127.jpg

IMG_20240120_102501928.jpg

IMG_20240120_102352579_HDR.jpg

IMG_20240120_102347801.jpg

IMG_20240120_102425582_HDR.jpg

Dave P Newbie

Dave P

Posted
  • Author
Posted

The driven cvt (trany side) is new. Seems like it free wheels on the spline. With the belt on it may grip the splines.

The driver cvt (engine side) was taken apart and a pvc pipe sleve was installed as no parts are available.

The most center bushing was worn out. When the engine runs it moves in and out.

Seems like the belt should sit at the bottom of the pulley. May not be wide enough at the bottom.

I am familar with autobody and mechanics never messed with variable pulley stuff.

 

Thanks for some help.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Brent C
      Heater used in 2024 Axis 750 (Firestorm?)
      By Brent C
      Hi all, I own two Axis UTV's. Last year I purchased a 2022 Axis 500. I had a mechanical issue with the shifting forks after only 50 miles. I contacted Axis/Hisun warranty dept. That were very helpful and willing to send out a representative to see if it was a warranty issue that fell under coverage.  Since I live in an area that does not have authorized repair facility within 300 miles. A really nice guy drove all the way from West Virginia which was 4 hours away. He determined that the console would not stay seated in position and while driving it, the console would jump forward and knock it into the wrong gear causing the shift forks to become bent. It was then picked up a few weeks latter to be repaired in Richmond, Virginia. It should arrive home soon.
      Now to my question. After the 2022 Axis 500 was taken for repairs, I bought the 2024 550 Axis. I bought the first one to take my son who is disabled from an extremely rare disorder that requires daily care to get out of the house. There are two things that give him joy, music and going for rides.  That is why I purchased the first one, However because it had bucket seats and the engine was between the two and was too loud even though I deaden the sound and put a quiet muffler on it. 
      I then decided to purchase the Axis 550 for the great updated features and the bench seat, I will be buying the complete enclosure ad on's offered by Hisun. Since it does not come with a heater (Axis 750 does) I was wondering if anyone knows what heater is part of the 750 edition. There was a photo that showed a Firestorm brand, however I can not find what variation it is. If anyone knows what a Inferno heater would be correct for the Axis 550. I would like to install it this Winter to take Justin riding on the farm. Any help would be greatly appreciated.   Brent 
       
    • boydog40
      2008 landmaster lm650 engine swap wiring problems
      By boydog40
      my subaru gave it up, bought a new Predator 670cc
      problems is, wiring the buggy to the new motor, OEM key switch has 5 wires (red, green, yellow, black and brown)
      new motor has many more wires than the Subaru and i have no idea what goes where!!!
      finding any info on the web is almost impossible to do also
      any help will be greatly appreciated!
      thanks guys
    • Frank in MI
      New old guy
      By Frank in MI
      Thanks for accepting me!
      Haven't got a side by side yet, but have been shopping.   
      Any advice welcome & I am on a limited budget, so haven't decided yet on new or used.
       
    • Poppateets
      New owner with questions
      By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • eManualonline.com Save 30% OFF Sitewide, Use code: XMAS30
    • JSwearer
      T-Boss 550 aftermarket suspension suggestions
      By JSwearer
      Does anyone have any suggestions for aftermarket shocks.  I have a T-Boss 550 and took it riding in some rough trails and the stock suspension was uncomfortably rough.
      Thanks

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...