Quantcast
Jump to content


2018 Massimo buck 400efi oil leak

bfairchild21
 Share

Recommended Posts

bfairchild21 Newbie

bfairchild21

Posted
Posted

Please help I have a Massimo 400 buck that has an oil leak. The oil is leaking on the front side of the motor. It leaks out of a u-shaped steel pipe that has two banjo style fittings on it. I have tried using RTV and different banjo washers and have had no luck. It drips about one drip per second while it's running. I can't find parts for it at this time.

T-boss 410 Experienced

T-boss 410

Posted
Posted

I take it the leak is at the fitting? Is it both fittings? Did you maybe try some plumber's tape? Wrap that around the threads on both fittings and see if that helps.

  • 2 weeks later...
bfairchild21 Newbie

bfairchild21

Posted
  • Author
Posted

I have tried two sets of rubberized o-ring crush washers off of Amazon and both of them have leaked. Not sure what to do next other than to keep adding oil and keeping the dust down around the property, lol! Very frustrating.

bfairchild21 Newbie

bfairchild21

Posted
  • Author
Posted

I was able to get a closer look with a camera snake and I found that my leak is coming from the cylinder gasket and not the oil lines that I have been screwing with. Any ideas besides taking the motor apart to fix this(considering trading it in because of the lack of parts out there)

T-boss 410 Experienced

T-boss 410

Posted
Posted

By "cylinder gasket" do you mean the head gasket? Keep in mind that these engines are usually a clone of another manufacturer, such as Yamaha, Kawasaki, etc. If you do some research you may be able to find out what other manufacturers out there are using an identical engine. This can lead to parts that you originally thought were no longer available.

I'm sure other members here can chime in and offer some help with that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • KimAC
      Front Shocks for Landpride Treker 4200NT
      By KimAC
      I need a pair of front shocks for a Landpride Treker 4200NT, from 2005?  Does anyone know of a good salvage yard - or another source?
      The old shocks have "SEBAC 11685 12 3" stamped on them (or something very close - it's hard to read). I think SEBAC are (were?) an Italian company.
      Is there a compatible shock I can use? I don't have easy access to a scrap yard where I can compare shocks etc.
      Thanks,
      -Kim
    • hisun junk
      2017 Cub Cadet Challenger 750 hisun junk motor
      By hisun junk
      As I tried to do a conversion with the Yamaha 660 motor, I realized the 660 was never fuel injected so it would not work for the fuel injected hisun motor swap. But the good thing is the hisun 750 motor is a clone of the 660 Yamaha but with the components for the fuel injection (cam/crank position sensor). So that left me with a new rebuilt Yamaha 660 and still a broke 750 hisun motor. I took apart 750 think the timing chain had broke from all that I've heard about these motors. The chain was not broke, but just off cam and crank gears! The chain tensioner was at fault!  I've ordered Yamaha 660 replacement parts, chain, two exhaust valves (which got bent when chain came off while motor was spinning) and seals. The piston has 2 little nicks where it had hit valves but no damage otherwise. The head is being redone at the machine shop and I'll be putting it back together in the next couple of weeks. Also I finally tracked down a Service Manual with all the info on the 550/750 Challenger.

    • Homeowner A
      Coleman UT 400 Garage?
      By Homeowner A
      I have a Coleman UTV 400 and looking for something to store it in.  Preferably something vinyl or plastic with its own base that can stand alone outside and house the UTV.  I think the dimensions of the UT400 are around 106" long 52" wide and 74" tall. 
      What should I consider that won't break the bank?    
    • SouthernGypsy
      Help needed, Anyone recognize where this Internally Threaded Bolt belongs?
      By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • JOSEPH LAMAR
      Please help me solve this
      By JOSEPH LAMAR
      I have a 2020 axis 500 and I have replaced the TPS twice and the whole throttle body assembly once and still have code 122. I can barely drive the thing. It bucks and surges like crazy

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...