Quantcast
Jump to content


UTV Oil Change

Wesley

By Wesley
in UTV General Discussion

 Share
Go to solution Solved by Joe Breaux,

Recommended Posts

Wesley Newbie

Wesley

Posted
Posted

I have a 2022 500 Hisun product, I have had them in the past. I change my oil myself and trying to drain through the hole where I remove the plug is a mess.  How does everyone keep the belly pan clean during the oil and filter service?

 

Wes Jackson

  • Like 1
T-boss 410 Experienced

T-boss 410

Posted
Posted

I may have gone too far when I did my last oil change, but I removed the belly pan. It made things much easier, as I could see what I was doing much better. I believe there's only a few machine screws holding it on.

BlueFlag Rookie

BlueFlag

Posted
Posted

I agree completely with removing the belly pan as part of the oil change.

Only 6 screws hold it on, and they are easily removed with a drill driver and socket.

I just got done doing the oil change on my 2022 Massimo 550F (Linhai 493, w/oversize dropside steel bed),

All of the grief I endured with oil splurt, oil filter drainage and dropped parts & tools made me regret not removing that pan.

Besides, at this point you also have the opportunity to clean the dirt, mud and stones that have accumulated in the area under the engine.

RR

  • 6 months later...
Wesley Newbie

Wesley

Posted
  • Author
Posted

So folks, I changed the oil on my 2022 AXIS 500 this Spring but forgot to take this conversation one step further. The belly pan on my machine is metal and welded to the frame. Taking it off is not an option but on this model the oil drain hole is large enough to allow changing the oil a breeze. Yes if oil got on this belly pan some brake clean and a rag would take care of the problem. This is my last comments on the matter.  

  • Thanks 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Aaron Colona
      2022 t-boss 760 oil filter
      By Aaron Colona
      Just bought a brand new 760 about a month ago. I'm at 20 hours which the book says is when you need to change the break in oil. 
       
      I must be crazy, but I can't find the oil filter. I've googled a million videos...everything seems to be 2019 or lower...and/or a 550.  They all show the filter easily seen by looking in past the rear passenger tire on the engine. There is absolutely nothing there on mine. 
       
      1.there seems to be very little info if you Google a 760, or anything Massimo newer than like 2019. 
       
      2. Does anyone have a current model year 760 that can answer my riddle for me? 
    • Chile
      MSU 700 Oil Burning
      By Chile
      2018 Massimo 700 MSU. The machine started burning oil all of a sudden. One day fine-- next morning burning oil. Looking for advice. Do I pull the engine to inspect the top end or can it be done with the engine in place? Pro? Cons?
      Any and all assistance is greatly appreciated in advance.
      Chile
       
    • GunnersTacklebox
      2022 Sector 750 EPS starting issues
      By GunnersTacklebox
      Hi All,
      New here, but bought a 2022 Sector 750 brand new last march (old stock up here in Canada)
      It's a good bike so far, but I have noticed a quirk and was wondering if anyone else has had a similar issue?
       
      The issue I've had is if I leave the utv parked on any incline, not even a major incline, and leave it to sit for a while (day or two) it will not start properly. It will turn over and not fire until I press the gas pedal, when it will run and rev up, but if I let off the gas it will die. It will keep doing this until I either start it in gear and drive it for a bit or leave it in neutral and roll it down the hill to flatter ground. where it will have to sit for a while. 
      If I park it on a decline there is no issue. fuel is not low, it's occurred a couple times now. 
       
      Any thoughts on the cause of this? Dealership just says bring it in and let them take a look, at my expense of course. 
    • Mike Jenkins
      2013 hisun 700 will not run, cranks fine
      By Mike Jenkins
      I have a 2013 Hisun with a 686 Yamaha engine.
      I purchased it from an individual and it ran fine as long as the battery was full.
      I replaced the stator and now it will not start (run).  It cranks fine, has fuel pressure, but will not fire up.  I replaced the coil, no luck there.
      a technician told me that it was the wrong stator and wants a mint to replace it.
      the wires all plugged in when I installed the stator.
       
    • HighSon
      Glass Honda Talon windshield adapted to Hisun Sector
      By HighSon
      This mod is not for the fainthearted, as it requires some basic metal fabrication and welding skills.  But the result is worth the effort IMO.  I chose an aftermarket Honda Talon windshield based on economy, size, and construction (aluminum frame, DOT glass, folding, windshield).  It fits OK, a little narrow at the top, and you need to incorporate the lower section of the original acrylic windshield and build some additional plates, but better than being too wide.  If you are wondering why I attacked this mod, it's because mine is driven daily on the street.  Tired of fading, scratchy, hazy plastic.  Sucks in the rain; sucks at night.  Now I can see.


UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...