Quantcast
Jump to content


Recommended Posts

Posted

Wow! that was close.

With all the speculation on the demise of Joyner I was worried that our most valuable resource, that's all of you, would be lost when the board went down. We need to put together a member list just in case that happens.

I haven't explored all the capabilities of the existing board, maybe this information is already here. If so, please tell me where to find it.

Gumball

Posted

Wow! that was close.

With all the speculation on the demise of Joyner I was worried that our most valuable resource, that's all of you, would be lost when the board went down. We need to put together a member list just in case that happens.

I haven't explored all the capabilities of the existing board, maybe this information is already here. If so, please tell me where to find it.

Gumball

I will go for that. while it was down I was having withdraws.I kept checking numerous times every day.I am just glad it is back up and willing to participate in whatever means anyone comes up with to keep in toch should this happen again.

I just want t thank everyone for all the good advise and tips they have given me since becoming a Joyner owner.

Posted

The Last Time the site was done and came back up, I tried to encourage the same thing. Was not very successful so I have a hard copy, print out, of any info I do not want to lose. Never could get anyone to step-up and put together & maintain a contact list. Volunteer?

rocmoc n AZ/Mexico

Posted

The Last Time the site was done and came back up, I tried to encourage the same thing. Was not very successful so I have a hard copy, print out, of any info I do not want to lose. Never could get anyone to step-up and put together & maintain a contact list. Volunteer?

rocmoc n AZ/Mexico

I will do what I can, how do you suggest it to be done?

Posted

The Last Time the site was done and came back up, I tried to encourage the same thing. Was not very successful so I have a hard copy, print out, of any info I do not want to lose. Never could get anyone to step-up and put together & maintain a contact list. Volunteer?

rocmoc n AZ/Mexico

OK here is a plan. Lets have everyone send their E-mail address along with who they are and maybe address and phone numbers if anyone chooses to Kinarfi, Rocmoc or Cinda, all moderators.

this information can then be posted on the forum as pinned member information. As individuals, anyone can copy this information for our own records. I've narrowed down the volunteer list to one of the three, that is for now. I understand that all the moderators have other priorities but they are the only ones that can pin a topic so lets start there. Volunteer? If we get a volunteer, we can start sending contact info to them.

Lenny

Posted

While this is a good idea in a perfect world, I would never allow my Email and address and phone to be publicly available on a forum, too many spammers and scammers out there. This would need to be a behind the scenes operation and probably done with PMs. I have some info on several members in my contacts file that include Jim Burns, former owner of Joyner (I think), but I won't pass it on because I don't remember getting permission to do so.

What I'm saying is if you want a list, pm those who you want on it and ask, if they send you the information, keep it to your self unless they say to pass it on.

Kinarfi

Posted

While this is a good idea in a perfect world, I would never allow my Email and address and phone to be publicly available on a forum, too many spammers and scammers out there. This would need to be a behind the scenes operation and probably done with PMs. I have some info on several members in my contacts file that include Jim Burns, former owner of Joyner (I think), but I won't pass it on because I don't remember getting permission to do so.

What I'm saying is if you want a list, pm those who you want on it and ask, if they send you the information, keep it to your self unless they say to pass it on.

Kinarfi

Ya, your probably right.

Lenny

Posted

An Idea.

Everyone send your info to Kinarfi, Cinda & myself via a private message via this site. We will pull the info and keep it. If something ever happens, between the three of us we should be able to contact most everyone.

rocmoc n AZ/Mexico

Posted

An Idea.

Everyone send your info to Kinarfi, Cinda & myself via a private message via this site. We will pull the info and keep it. If something ever happens, between the three of us we should be able to contact most everyone.

rocmoc n AZ/Mexico

Sounds like a good idea.

Cinda

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By CYJSP2009
      Dear Friends, 
      2022 Brand new Joyner CV Axles and CV  Joint rebuild kits are comming 
      1.  S650.03.02.02.00 ---Joyner 650 Commando Rear
      2. TR1100.03.01.03.00 --- Joyner Trooper Front 
      3. TR1100.03.02.03.00 --- Joyner Trooper Rear
      4. D650.03.02.02.00 --- Joyner 650 Sand Spider Rear Left 
      5. D650.03.02.03.00--- Joyner 650 Sand Spider Rear Right 
      6. SV800.03.02.01.00 --- Joyner 800 Viper, SV1100 Drive shaft Left
      7.  14274 --- 650 ider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      8. 15803  ---  650 Sand Spider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      Attached are the part photos for reference. 
      Above parts are now on the way to USA, will be ready for inland delivery in middle of July. 
      Price: CV Axle: USD250/ Piece;  CV Joint kit (without grease): USD110  send to door. 
      There will be special discount availabe for deals completed within July 2022.  
      Buy 1 piece: Get 5% discount, 
      Buy 2 pieces: get 10% discount.
      Buy 3 pieces: get 15% discount, 
      Buy 4 and more than 4 pieces: get 20% discount. 
      Please kindly note Qty for each part is not big  and it is hard to forcast when there will be next offer for these kind of products unless there is sufficient confirmed order qty for productioin arrangement. 
      Payment method: Payoneer payment link ( can pay through bank account or credit card) or Paypal ( [email protected]) .  Payment commission paid by the buyer. 
      Interested parties, please contact [email protected]
      Thanks
      Good Luck
      Casey / Leaf Asia
      July-07-2022
       
       
       














    • By staind
      Looking for information on installing a OBD port or a lite to read codes in ECM. 
      I can not find a OBD port or a lite to read codes on this R2 with 800cc. 
      I have code readers and adapters for most ATV's. From what I've found so far. They don't have a connection for to read codes. I may be wrong. That's why I'm asking. 
      This R2 has had new IAC, TPS, MAP, fuel pressure regulator and fuel pump replaced. This was done by neighbor to try to stop surging. It still surges on start up and then settles down. But once you hit the accelerator it revs up to 2000+ rpm and stays till you block off IAC port in throttle body with finger. Once you do that it once again settles down and idles perfectly.
      I want to know what the ECM is reading to help dio it.
      This joyner is the first one I've run across. Well second one in a week. (my neighbors 2 of them) The other was a trooper with the 1100cc chery motor that had been setting for years. After cleaning up the fuse box connections. It runs like a top. Had to replace all gages with aftermarket gages. Water, oil, gas, amp. Only problem one was the water temp using original sending unit. Had to install 150 ohm resistor on the input wire to get it to read correctly + - 5 degrees. Close enough. Gas sending unit was/is for a boat tank 6" tall. All SS so it should last forever. 
      thanks Dan D. aka staind
    • By CRV
      Howdy new member here . My hobby's Rabbit dogs , gamefowl . I'm retired from my real job but I stay busy with the hounds and gamefowl . So to help around the farm I ran across an old 2007 CC Big Country 4x2 to haul feed , water , sprayer and my sorry a$$ .It is in pretty good shape , 781 hrs. good plastic , tires, ect. . But as anything outside and 18 years old it needs seats ! The thing I have found wrong mechically the Diff. Lock Acturtor is broken where it mounts to the bracket ( partly why Im here ) . Hoping someone here can help  ! Just my wish list but Id like to find a roll cage and a composit/plastic top for it Im thinking I'll need a donor to salvage these things from ( again partly why Im here ) .Is there another brand that uses this same actuator? If anyone reads this and has or knows of any of threse parts PLEASE HOLLER !! 
      Again Howdy brothers & sisters

    • By Prepper
      Hello All...
           Just bought a 2014 Massimo 500 UTV.  It;s not running at the moment, but hopefully will soon.  I need a seat for it also (passenger side, if it makes any difference.)  It is a crank-but no start situation.  Just now starting to read the boards for solutions.  Apparently these models are well known for this issue.  If anyone has any suggestions, please feel free to chime in, it would be greatly appreciated.
      Thanks 
×
×
  • Create New...