Quantcast
Jump to content


Recommended Posts

Posted

ORC (Offroad Connection) of Alabama fabed me a skid plate that has turned out to be one of the best mods to my T2. I just wanted to share! B)

Why I choose this skid plate:

Quiet in the woods or on rocks (unlike aluminium or steel)

Slick non-friction surface keeps you from being hung up

Flush mounts and hardware

One peice

Colors: Black White and mulitcolor

The mold

iphone3g413.jpg

Skid cut to mold

iphone3g402.jpg

iphone3g416.jpg

iphone3g403.jpg

iphone3g406.jpg

iphone3g404.jpg

iphone3g405.jpg

iphone3g414.jpg

iphone3g394.jpg

In Action!!

securedownload.jpg

  • Like 1
Posted

Sweet, how much did it cost. How thick is the material and what is the material used. I assume the metal bars are skid bars, do they need to be embedded? Who has the template now?

kinarfi

Posted

Sweet, how much did it cost. How thick is the material and what is the material used. I assume the metal bars are skid bars, do they need to be embedded? Who has the template now?

kinarfi

Off road Connection has the templates and will be glad to make many more. $600 and it includes the flush mounting hardware. The mounting did not need to be embedded just did it that way to keep from dragging or hanging up when bottomed out. The material is like a cutting board at industrial strength. It is 1/2 inch thick. It might weigh 35 to 50 lbs just a est. But i also removed the old metal skids prior to bolting this one on. Hopefully I didnt add any weight!!

iphone3g420.jpg

Posted

Sweet, how much did it cost. How thick is the material and what is the material used. I assume the metal bars are skid bars, do they need to be embedded? Who has the template now?

kinarfi

I assume that it is UHMW ( Ultra high molecular weight polyethylene ). It's prety tough stuff. Rather it would hold the entire weight of the Trooper on a somewhat pointed rock is debateable but other then that it should work good. A 5' x 10' sheet 1/2" thick would probably run around $450 from a plastics distributor. It cuts easy with a saw.

Lenny

  • 10 months later...
Posted

got back last night from spending the day on Saturday eating Lennys dust(LOL).While unloading it off the trailer just happened to look underneath and saw my skid plate had a couple real good dents and one of the cross members of the frame had a big dent in it.I know i bottomed out once but not that bad so it happened on another trip and just did not notice it.I remembered this post about the one piece skid plate and now seriously thinking of doing it.I need to find the material,hopefully not too expensive.Any thoughts?

Posted

got back last night from spending the day on Saturday eating Lennys dust(LOL).While unloading it off the trailer just happened to look underneath and saw my skid plate had a couple real good dents and one of the cross members of the frame had a big dent in it.I know i bottomed out once but not that bad so it happened on another trip and just did not notice it.I remembered this post about the one piece skid plate and now seriously thinking of doing it.I need to find the material,hopefully not too expensive.Any thoughts?

Here's a few photos of what I did, but I haven't had a chance to beat it up yet,

2407183660104110397bLbRRc_th.jpg

click on the thumbnail and then browse the album

Kinarfi

Posted

Here's a few photos of what I did, but I haven't had a chance to beat it up yet,

2407183660104110397bLbRRc_th.jpg

click on the thumbnail and then browse the album

Kinarfi

whats the thickness? is it aluminum?

  • 2 weeks later...
Posted

Crawlin2, I am diggin your ride and where you are going with it! This is a sweet upgrade. I used to compete in UROC, so I appreciate the crawler touches you are adding. I will probably be doing something like this very soon. I am tired of getting hung up on the dumbest things. I was thinking of doing 1/4 inch aluminum. I need to make a decision. The trooper reminds me of a mini rock racer. I love it!

Posted

whats the thickness? is it aluminum?

If I remember correctly, I ordered 1/8" aluminum and what they sold me was .120 aluminum and I think the grade was 5052, the bend had to be done with a press brake. yep, ALUMINUM SHEET 10 X 4 X 1/8" 5052, just a little under $200

Still have over half of it left. plan to put some under the engine next, if you do this, replace all the hardware with clipnuts and 1 1/2" bolts or truss head screws.

kinarfi

Posted

Crawlin2, I am diggin your ride and where you are going with it! This is a sweet upgrade. I used to compete in UROC, so I appreciate the crawler touches you are adding. I will probably be doing something like this very soon. I am tired of getting hung up on the dumbest things. I was thinking of doing 1/4 inch aluminum. I need to make a decision. The trooper reminds me of a mini rock racer. I love it!

The !/8" aluminum is fine for most of the under side. I sujest grade 6061-t6 which is one of the more strong aluminums. The 7000 series is aircraft aluminum but more expensive and more difficult to work with. Some of it is almost like spring steel. I use a 3/8" thick plaste under my engine and directly under the differential it is beefed up to 3/4" thick. With 1/4" I put a hex hole in the plate from the diff drain bolt when I clipped a rock. Went to 3/8" and could still push it in when clipping a rock hard. Now with 3/4" under the diff, when I clip a rock good and hard, I just bounce over it without damage. Notice in Kinarfis picture how he bent the front 4" up on a slope. This is just under the front of the seat. I did this on mine also. I kept catching rocks on the pipe there. With the slope, this doesn't happen. Under the front diff I use a 1/4" thick plate. I also use a 1/4" thick plate under my gas tank. I wouldn't want to rupture the tank while making sparks bouncing over a rock. The 1/8' 6061-t6 plate will hold the trooper up on rocks without too much bend in and it doesn't need to take inpact hits like the diffs might. The stock aluminum is pretty soft and it doesn't take much to bend it. I welded new tabs with threaded holes on the under side to hold the plate and used 3/8" grade 8 flat socket head bolts with the aluminum being counter sunk to receive them. Nothing to catch rocks. I would be concerned with the weight of all being 1/4" thick and don't feel it is necessary.

Lenny

Posted

The !/8" aluminum is fine for most of the under side. I sujest grade 6061-t6 which is one of the more strong aluminums. The 7000 series is aircraft aluminum but more expensive and more difficult to work with. Some of it is almost like spring steel. I use a 3/8" thick plaste under my engine and directly under the differential it is beefed up to 3/4" thick. With 1/4" I put a hex hole in the plate from the diff drain bolt when I clipped a rock. Went to 3/8" and could still push it in when clipping a rock hard. Now with 3/4" under the diff, when I clip a rock good and hard, I just bounce over it without damage. Notice in Kinarfis picture how he bent the front 4" up on a slope. This is just under the front of the seat. I did this on mine also. I kept catching rocks on the pipe there. With the slope, this doesn't happen. Under the front diff I use a 1/4" thick plate. I also use a 1/4" thick plate under my gas tank. I wouldn't want to rupture the tank while making sparks bouncing over a rock. The 1/8' 6061-t6 plate will hold the trooper up on rocks without too much bend in and it doesn't need to take inpact hits like the diffs might. The stock aluminum is pretty soft and it doesn't take much to bend it. I welded new tabs with threaded holes on the under side to hold the plate and used 3/8" grade 8 flat socket head bolts with the aluminum being counter sunk to receive them. Nothing to catch rocks. I would be concerned with the weight of all being 1/4" thick and don't feel it is necessary.

Lenny

Good stuff guys--thanks. My goal will be to get the bottom completely flat. It is the tubes that I also get caught up on. I have some aircraft panel fasteners I would love to use on the skid plate. They would be completely flush and they are speed fastners. They would engage a floating nutplate & have a retainer so they don't fall out of the panel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
    • By hetovi
      Hey everyone,
      I’m in the market for a UTV windshield that can withstand extreme conditions, including high winds, dust, and off-road impacts.
      I’ve seen a lot of options out there, but I’m unsure which one will provide the best protection and durability.
      Does anyone have experience with windshields that excel in these environments? Are there specific brands or materials you recommend?
      I’m particularly interested in options that offer both durability and clarity.
      Any tips or personal experiences would be greatly appreciated!
    • By diamondjfarm
      I got an old 2003 Arctic Cat 375 Auto, and just bought a 2008 AC 650 side by side. Got a new starter, solenoid, and battery for the 650. Gonna change the crankcase oil and filter while I'm at it.
      Anything I oughta watch out for from them that's done the starter/solenoid on this model?
      Don't have a manual yet for the 650. Any recommendations for oil weight/grade?
      Thanks.
×
×
  • Create New...