Quantcast
Jump to content


Recommended Posts

Posted

Sorry that I havent been around much. Been really busy with work and other projects.

I'll start out with what happened in November. On the gas tank, there is a pick-up for the fuel delivery and the return, and the nipple that the delivery hooks too busted because of the cold (I think). Been searching for months to find a replacement or one that would work with it. Finlay decided to fix it with some parts from my local Napa. I got 5/16" fuel line connectors and drilled out and put that in a put some silicon around it. Better than new!

Then, my battery crapped out on me, went every were that sells battery's within 20 mile radius and couldnt find anything! Then I found a big riding lawn mower battery for $36 at Checker Auto (Oriley, etc.) figured if it wouldn't work I could use it on my mower. it fits perfect and starts and turns over the Ruesch great! Im going to get another one to put under the seat to run the lights and radio. Then do a battery isolator .

So for the Ruesch owners out there whos dealers are gone(like mine) or are flakes and cant find some OEM parts, here ya go.

Posted

Sorry that I havent been around much. Been really busy with work and other projects.

I'll start out with what happened in November. On the gas tank, there is a pick-up for the fuel delivery and the return, and the nipple that the delivery hooks too busted because of the cold (I think). Been searching for months to find a replacement or one that would work with it. Finlay decided to fix it with some parts from my local Napa. I got 5/16" fuel line connectors and drilled out and put that in a put some silicon around it. Better than new!

Then, my battery crapped out on me, went every were that sells battery's within 20 mile radius and couldnt find anything! Then I found a big riding lawn mower battery for $36 at Checker Auto (Oriley, etc.) figured if it wouldn't work I could use it on my mower. it fits perfect and starts and turns over the Ruesch great! Im going to get another one to put under the seat to run the lights and radio. Then do a battery isolator .

So for the Ruesch owners out there whos dealers are gone(like mine) or are flakes and cant find some OEM parts, here ya go.

Welcome back. Riding lawn mower batteries are great. That is what I use in my race cars. Watch the silicon, may breakdown from the gas and leak.

rocmoc n AZ/Mexico

Posted

Welcome back. Riding lawn mower batteries are great. That is what I use in my race cars. Watch the silicon, may breakdown from the gas and leak.

rocmoc n AZ/Mexico

Thanks! The battery works great! I wish I would have used these kinds of batteries when I was racing.

The silicone is Loctight Gas and Oil resistant adhesive.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Jim Kessell
      2005 American Landmaster
      EH65 Subaru Robins
      spits fuel from breather hose into the air cleaner and then down into carb.  What’s causing this ??
    • By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
    • By Callie
      We have replaced the relay/fuse, water pump, fan & radiator cap. What are we missing? Fan still won't kick on.
    • By Brett
      Fuel injected 700 starts great and idles great but touch the gas and it dies
    • By Rainman
      I just picked up a 2021 Coleman UT400 and one of the things it needs is a gas cap. I believe it needs the 2021+ version with mail threads. Anybody know where I can get one? Coleman isn't shipping anything out right now. I believe the part number is P315001811400000. The only after market gas caps I see available are before 2021.
×
×
  • Create New...