Quantcast
Jump to content


Coleman 400 UTV fuel issue

weasel

By weasel
in Coleman UTV SxS Forum

 Share

Recommended Posts

weasel Newbie

weasel

Posted
Posted

starts up you have keep rpms up for 5 minutes till it warms up then runs fine. But if it stalls wont start unless you unplug fuel pump and hold it to the floor till it starts then plug pump back in and run it till it warms up then it is fine all day.

aefron88 Community Regular

aefron88

Posted
Posted

Have you tried resetting the ECU? Likely something funky happened with the IAC settings or the fuel trim.

When running rev it to redline in neutral, and shut it off with the pedal still floored. Wait 5 seconds and then let off the pedal and restart as normal

...or you can use the codescanner method if you have the codescan cables and HUD ECU hacker

  • 4 months later...
shawn b Rookie

shawn b

Posted
Posted

i bought the plugin connecters that you mentioned or the hisun 400 utv 2020. and the 6 pin plug was different so i had to cut the plastic housing away for the pins to plug in.and i get no readings or power through it. i looked on amazon or the right one but cant find it.if someone can help of were to find the right one would be great.have the hud hacker and everything else its just the plug to the bike?

NDV45 Rookie

NDV45

Posted
Posted

I am curious Does the 2008 Cub Cadet Tracker have this chip in the ECU?  How do I go about checking codes in it, does anyone have an idea please.

  • 2 weeks later...
aefron88 Community Regular

aefron88

Posted
Posted
On 8/20/2024 at 10:48 PM, shawn b said:

i bought the plugin connecters that you mentioned or the hisun 400 utv 2020. and the 6 pin plug was different so i had to cut the plastic housing away for the pins to plug in.and i get no readings or power through it. i looked on amazon or the right one but cant find it.if someone can help of were to find the right one would be great.have the hud hacker and everything else its just the plug to the bike?

got mine off ebay, should not require any cutting if you get the right adapter.

Mine came slow boat from China, but there were domestic alternatives there for more money.

aefron88 Community Regular

aefron88

Posted
Posted
On 8/24/2024 at 11:57 AM, NDV45 said:

I am curious Does the 2008 Cub Cadet Tracker have this chip in the ECU?  How do I go about checking codes in it, does anyone have an idea please.

If I had to guess a model that old is likely carberated, and would not have the Delphi ECU.

Sometime in the mid/late teens is when Hisun switched to fuel injection/Delphi ECU system

  • 4 months later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Prepper
      2015 MSU-500 crank - no start
      By Prepper
      I'm working with a 2015 MSU-500.  Basic symptoms are it cranks well, but will not fire.  It has spark, and it has fuel spraying out of the injector (and spraying starting fluid into the throttle body and plug hole makes no difference).  It has compression.  I bought it not running, and no other information was available.  It has 775 miles on it and 127 hours.  It looks to be in very good shape.   Previous owner replaced fuel pump, ECU, coil, plug, and the fuse/relay box that mounts on the firewall, then gave up.
      My questions relate to cam/valve timing, considering the symptoms and diagnostics so far.  My thinking was the woodruff key sheared off and the crank spun, making it out of time.  My question is, by the pictures attached does anyone have an opinion as to the cam/valve timing being correct?  In the crankshaft picture you can see a timing mark visible.  In the camshaft picture I have arrows directed towards what I think are timing marks (which appear to be exactly 180 degrees from one another).  However, the long arrow in what appears to be bolt configuration in line with the piston/rod line.  Here is a puzzling note... in the position you see in the pictures... I have valve lash on both the intake and exhaust.  I think it's at TDC, given the visible crank timing mark and valve lash on both valves. 
      Any thoughts ?  Does this appear to be in proper valve time ?  Have I missed anything simple ?  Thanks in advance for your input.


    • Jim Kessell
      EH65 spitting fuel from breather hose into air filter.
      By Jim Kessell
      2005 American Landmaster
      EH65 Subaru Robins
      spits fuel from breather hose into the air cleaner and then down into carb.  What’s causing this ??
    • Buddee
      Losing Fuel / Prime 500cc
      By Buddee
      2010 Hisun 500 - Carbed'.  She sat for about 3 weeks since last use.  Couldn't get it started.... has spark but plug was not wet.  Bought new plug, cleaned the carb, confirmed fuel pump (pulse type) is working.  Still nothing.  Put gas in the plug hole.... started right up and idled as normal and drove perfect.  Used it for the rest of the day without issue.  Tried to start again next morning.... same problem.  Poured gas in plug hole again.... started up and best kind again.
      Anyone have any insight to what's going on?
    • Brett
      2006 Polaris Ranger 700 side by side idles fine but dies when you touch the gas
      By Brett
      Fuel injected 700 starts great and idles great but touch the gas and it dies
    • vachi
      2021 hisun forge 250 no spark no fuel
      By vachi
      hi everyone i have this 2021 Hisun forge 250 that won't start. no spark no fuel.   when i turn the key on i dont hear the relays click or fuel pump come on. it does have power but the relay doesnt ground the pump or the ignition coil. dont know if there are any safety switches on this model or not.  it does crank and all the accessories work. i  hot wired the pump and it does work.  i found a wiring diagram but it's very hard to figure out and was hoping someone has seen this before. all fuses are good. thanks in advance. 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...