Quantcast
Jump to content


Recommended Posts

Posted

I've been looking at various types of UTVs in the 400-700cc range. It seems that Massimo has a really good price point but I don't know much about their reliability and availability of parts. Been looking specifically at their T-Boss 550. I've heard the parts might be an issue because the network is smaller, but couldn't find much info from owners.

Here are a few specific questions about them

1. In your opinion, are the reliable? Specifically, have you hand any parts break that in your mind shouldn't have? 

2. If you had one and got rid of it, what was the reason? 

3. If you don't recommend Massimo, what would you recommend (even if it costs a little more)?

4. How easy is it to find a place to service them? How easy is it to get parts if you want to service it yourself? 

If you have any other advice, I would appreciate it. I'm also looking at the Hisun Sector 550.

Posted

1.  No not reliable.  Yes, bad seal that leaked oil on drive belt, replaced seal and belt and misc clutch parts.  Shift ball detent, both when new.   Actually parts have not been the problem, quality is the problem.

2.  Have not got rid of it, no one wants it.

3.  Kubota Sidekick

4.  Damm near impossible, some parts are on ebay.

Mine is a MSU500 bought new from Tractor Supply.

 

  • Like 1
Posted
On 4/4/2024 at 2:18 PM, JSmojo said:

I've been looking at various types of UTVs in the 400-700cc range. It seems that Massimo has a really good price point but I don't know much about their reliability and availability of parts. Been looking specifically at their T-Boss 550. I've heard the parts might be an issue because the network is smaller, but couldn't find much info from owners.

Here are a few specific questions about them

1. In your opinion, are the reliable? Specifically, have you hand any parts break that in your mind shouldn't have? 

2. If you had one and got rid of it, what was the reason? 

3. If you don't recommend Massimo, what would you recommend (even if it costs a little more)?

4. How easy is it to find a place to service them? How easy is it to get parts if you want to service it yourself? 

If you have any other advice, I would appreciate it. I'm also looking at the Hisun Sector 550.

Hello 

i have a 2022 Massimo t-boss 550. And it suck’s! I’ve blown 3 clutches 1 was my fault. The starter bearing (clutch). And now I’m dealing with timing and valves. Once you get the bugs out and know what it can’t do it’s ok! And no service. The one person that did help me at Massimo Canada got fired. Lol I’ve been fixing mine since I have no money to buy anything else, by the time I’m done with it it should be ok. I hope lol

good luck!! 

  • Sad 1
Posted

Do Not Buy Massimo...  bought one new from Tractor Supply..   Overheated on first day in first mile.. Tractor Supply refused to help, Massimo would not pay for repairs.. Refused to do anything. It went in the only shop I could find in my state that will even work on them, 6 times in first year.  Head Gasket failures.. Cracked head.. ............They worked on it, but you must pay cash, Massimo has stiffed every shop around. When I called BBB on them, there were hundreds of complaints.. I threatened suit, rep laughed on phone.. said..wont be the first one!............Trust me when I say... DONT BUY MASSIMO! 

Posted

I have a massimo axis 500 utv. 233 hours. I have usef it in very remote places with no issues. I have only changed the oil. My machine tops out at 42 mph and it lacks a little torque in deep samd and steep hills.

Posted

I see a couple of these folks posting have the old Hisun models, hey Joe!

Read much about them and it won’t take long to figure out they sucked. I have had only two issues with mine and one was caused by bad gas. Drained the tank and everything was fine again. Getting the shifter to smooth out was the only real issue. I’ve been able to get parts like plugs, filters and injectors with no problems. 

Posted
20 minutes ago, Joe Breaux said:

Good morning.  How's it hanging?  I'm. Fishing in the Basin.  LIFE IS GOOD

Hasn’t been warm enough up here for much fishing, but it’s changing today. Hope you didn’t get any damage from that last storm. 

Posted

DON'T BUY A MASSIMO! The quality is soooo bad! I have a 2021 550 TBoss new when inventory of the decent brands was at rock bottom. I paid new what used decent brands were selling for. I quickly learned why. The quality is soooo bad. Out of the gate I had to make numerous adjustments to get it to run, drive and operate smoothly. Couldn't tow anything because the hitch receiver snapped off, the cheap plastic guards in front of the suspension parts broke off in no time, flooring cracked after a bit of use, windshield is now un clear and unusable after cleaning a couple of times (yes, I was extremely gentle), And all of the above and more on a machine I barely use (very low miles)

I would love to sell it and buy a good one some day but I don't think anyone would buy it.

Listen to all of the advice above and stay away from this brand!

  • Thanks 1
Posted
1 hour ago, TapBoss said:

Hasn’t been warm enough up here for much fishing, but it’s changing today. Hope you didn’t get any damage from that last storm. 

85 today. Bass are spawning ..no damage at home or Whiskey Bay camp

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Dennis
      I have  a bulldog i bought from home depot in 2013.  In the last season it started refusing to shift from neutral to either forward or reverse.  I changed the trans axle fluid and made sure the cables were lubricated and free.  With a lot of coaxing, I can sometimes get it to shift.  once I start driving it, things improve until I let it set awhile.   Any suggestion on where to go from here?
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • By JimWil
      Looking for a place/website to order a  replacement bench seat and a dump bed fender from.
      Pics are the original orange when purchased and after painting with a textured bed liner type coating.
      Just looking for those two parts as mentioned above.
      JimWil
×
×
  • Create New...