Quantcast
Jump to content


QLINK FrontRunner

promod

By promod
in General Discussion - Anything

 Share

Recommended Posts

  • 2 months later...
BlueBuggy Contributor

BlueBuggy

Posted
Posted

I do not own a Q-Link but I have a member in our group who owns one. He says it is just as good as a Rhino. But I also have a member who sold his Joyner and then bought a Q-Link. When he got it home, he was unloading it off the trailer and when he put it in reverse the gear shift lever broke right off. He took back to the dealer and got his money back and then went and bought a new Rhino. He was not happy because he had driven 160 miles one way just to buy the Q-link

ROLLTIDE Newbie

ROLLTIDE

Posted
Posted

Does anyone have one? What has your experience been with ours?

The problem with Qlink is that they do not own any of there design. There are about three companies that buy these UTV's from a wholesaler and put thier badge on that particular UTV.

promod Rookie

promod

Posted
  • Author
Posted

The problem with Qlink is that they do not own any of there design. There are about three companies that buy these UTV's from a wholesaler and put thier badge on that particular UTV.

If the quality is good, is it really a problem? Actually, since three companies re-badge them it would be a benefit to the buyer in that they could chose the best re-badger or the one with the best warranty right?

ROLLTIDE Newbie

ROLLTIDE

Posted
Posted

If the quality is good, is it really a problem? Actually, since three companies re-badge them it would be a benefit to the buyer in that they could chose the best re-badger or the one with the best warranty right?

I would say you could answer the quality question better than anyone by owning one. The problem with being badged under a wholesaler is longevity. It is very difficult to build a brand selling someone else's machine with your name on it, when there could be one right next to yours on a showroom floor that is the exact same machine with a different label. The only way to set one apart from the other is price! Good for the consumer at first, but horrible for the industry! Cheaper and cheaper the pricepoint goes and so does the quality and reliability. A few years down the road there will be no parts, no dealers and no service for the cheap UTV's! Im not saying its not a good machine b/c I have heard they make a quality product. I just have a problem with building under a wholesaler.

promod Rookie

promod

Posted
  • Author
Posted

I would say you could answer the quality question better than anyone by owning one. The problem with being badged under a wholesaler is longevity. It is very difficult to build a brand selling someone else's machine with your name on it, when there could be one right next to yours on a showroom floor that is the exact same machine with a different label. The only way to set one apart from the other is price! Good for the consumer at first, but horrible for the industry! Cheaper and cheaper the pricepoint goes and so does the quality and reliability. A few years down the road there will be no parts, no dealers and no service for the cheap UTV's! Im not saying its not a good machine b/c I have heard they make a quality product. I just have a problem with building under a wholesaler.

Would the warranty not be a difference as well? Before getting the FrontRunner I looked at the warranties and the QLINK is 1 yr. vs. 6 mo. for the Rhino. It was also $3k less expensive than the base Rhino. I can buy a lot of spares for $3k if I want and have them ready just in case of an emergency. I also liked that the wheels on the FrontRunner were more like what after-market would be on others.

The Kymco similarly equipped was only a 500cc and was priced $1,500 more than the 700cc I bought.

I'm just pointing out some of the reasons I chose the QLINK FrontRunner for anyone in the market and looking for options.

Happy UTV'ing!

So far I have had no problems. Starts up every time and runs like a beast!

ROLLTIDE Newbie

ROLLTIDE

Posted
Posted

Would the warranty not be a difference as well? Before getting the FrontRunner I looked at the warranties and the QLINK is 1 yr. vs. 6 mo. for the Rhino. It was also $3k less expensive than the base Rhino. I can buy a lot of spares for $3k if I want and have them ready just in case of an emergency. I also liked that the wheels on the FrontRunner were more like what after-market would be on others.

The Kymco similarly equipped was only a 500cc and was priced $1,500 more than the 700cc I bought.

I'm just pointing out some of the reasons I chose the QLINK FrontRunner for anyone in the market and looking for options.

Happy UTV'ing!

So far I have had no problems. Starts up every time and runs like a beast!

Just curious, but is Q-link still in business? I just heard they were done. Filed for BK and the whole nine yards!?

promod Rookie

promod

Posted
  • Author
Posted

Just curious, but is Q-link still in business? I just heard they were done. Filed for BK and the whole nine yards!?

I hope they aren't out of business. I checked their web site a minute ago and everything looks like it's still alive and well. I really can't imagine, but anything is possible in these economic conditions.

QLINK

ROLLTIDE Newbie

ROLLTIDE

Posted
Posted

I hope they aren't out of business. I checked their web site a minute ago and everything looks like it's still alive and well. I really can't imagine, but anything is possible in these economic conditions.

QLINK

What motor is in your Q-link? Seeing some of these online but cant figure out who builds the motor?

  • 7 months later...
dj_laugs Rookie

dj_laugs

Posted
Posted

I hope they aren't out of business. I checked their web site a minute ago and everything looks like it's still alive and well. I really can't imagine, but anything is possible in these economic conditions.

QLINK

nah, we are still here and we have added a boatload of dealers in the North East last year. I am almost up to 70 dealers and most of them carry Rhino's, Can-Am etc. If you have any questions contact me please!

  • 1 year later...
Go40 Newbie

Go40

Posted
Posted

I have a 2008 frountrunner 700 i had nothing but problems with it. oil leaks ,starter bearing , starter, primary & secondary clutch rear end & drive shaft I just put a new piston & rings in it & now my rear seal is leaking did mention my machine has 1,170 miles. This machine was never abused , most of the time a saturday aftenoon cruise. Im in the process of selling it as soon as i fix the rear seal, my next machine will be a real rhino.....guess you get what you pay for....

Go40 Newbie

Go40

Posted
Posted

nah, we are still here and we have added a boatload of dealers in the North East last year. I am almost up to 70 dealers and most of them carry Rhino's, Can-Am etc. If you have any questions contact me please!

I will say this Beers in wysox pa. helped me out over the phone with many of my issues, they are good people... M y dealer went out of business (cbx man)
  • 6 months later...
bagels Newbie

bagels

Posted
Posted

Our 2010 Qlink is a piece of garbage. We have had nothing but problems with the clutch (we are on our 3rd one) and now the master cylinder is bad. The company won't even return phone calls or emails. This q link was never abused, garage kept and only used for yard work. Yes, it came with some nice extra's (winch, windshield, roof) but it's not worth it. As soon as it's fixed again there will be a 4 sale sign on it. We just bought a Polaris and it rocks!

  • Like 1
Go40 Newbie

Go40

Posted
Posted
Our 2010 Qlink is a piece of garbage. We have had nothing but problems with the clutch (we are on our 3rd one) and now the master cylinder is bad. The company won't even return phone calls or emails. This q link was never abused, garage kept and only used for yard work. Yes, it came with some nice extra's (winch, windshield, roof) but it's not worth it. As soon as it's fixed again there will be a 4 sale sign on it. We just bought a Polaris and it rocks!

J-U-N-K just bought a new rhino & i love it, no problems at all. Had the same encounter with qlink spoke to a girl named tamra, she dident want to know me beacuse i spoke with her weekly about that pos tthat was always broke, she made it seem like it was my fault it was broke. I have nothing good to say about them. Its going to be hard selling it, most dealers told me no way that they would take it as a trade, I ended up getting $2,000 on a trade. Good luck with your polaris. I guess the saying is true you get what you pay for....

  • 9 months later...
tminder Newbie

tminder

Posted
Posted

Q Links are crap. Can't get parts, service etc. 235 miles and sensor out already. Been waiting over two months now for the part. If it ever comes in I will be selling this hunk of junk for a big loss. Steer clear of them if you can.

  • 7 years later...
cliffyk Rising Star

cliffyk

Posted
Posted

The various Q-Link Frontrunner models are just re-branded Hisun "HS" models, like all Hisun products they are pretty good. Some of their early (pre-2005 or so) stuff was wanting, but the later (2016+) products are pretty damned good at their price point...

"yap, yap. yap" anecdotal stories of "Chinese crap", parts quality and availability are generally meaningless to me. Years back I had a two-month old $101,000 1998 Mercedes SL500 that spent a month in the shop waiting for a convertible top controller to come from Germany--though, after a bunch of bitching, cussing and yelling the dealer  did make my payment for that month...

Resellers like Q-Link usually buy partially assembled  products from manufacturers  at a pretty slim discount (typically just 20 to 25% off MSRP) and then to be competitive resell at some lesser discount. This does not leave them much room for profit, let alone parts inventory or sterling customer support--after a few years of dwindling resources even whatever crappy customer support they had offered goes away--that's why they don't last long...

  • 3 months later...
Fred Newbie

Fred

Posted
Posted
On 8/26/2012 at 6:22 PM, Go40 said:
On 1/17/2011 at 10:28 PM, dj_laugs said:

nah, we are still here and we have added a boatload of dealers in the North East last year. I am almost up to 70 dealers and most of them carry Rhino's, Can-Am etc. If you have any questions contact me please!

 

I will say this Beers in wysox pa. helped me out over the phone with many of my issues, they are good people... M y dealer went out of business (cbx man)

I have a Qlink 500 utv 2011 and my speedometer and radiator fan does not work and it show my rpm at 3000 at an idl and it not and I can only go 22 miles an hour I just put a head gasket in it if someone could help me with it please [email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Jacob E freeman
      2018 cub cadet challenger 750 over heats no one knows why
      By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • mark walkom
      sector e1 regen has stopped (mostly) working
      By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
    • Kingfish
      Now that I have done the LI-Ion batt conversion, I need to do something about the suspension
      By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • Jon V
      reassemble Cub Cadet Challenger 700 - Crankshaft does not turn freely
      By Jon V
      Good afternoon. When the timing chain came off its lower gear (previous owner had over-tightened the tensioner), I ordered new parts.. chain, oil-pump chain, tensioner etc.. But now that it's time to put it back together, the main crankshaft makes a clang noise and stops when you turn it by hand. I want to solve this before assembling everything. The camshaft cover is off so that the valves aren't being activated. Should the transmission be in neutral to turn the crankshaft? The engine was running fine until the chain came off the lower gear. Then it would spin when the starter motor engaged so I assumed the crankshaft was spinning. Any advice is appreciated.
    • hdtran
      Do you wear a helmet when riding your side-by-side UTV?
      By hdtran
      That's the question! Or, if you want to add details:
      (a) How do you use the UTV? (roads? off-road to get to trees? etc.)
      (b) If you are wearing a helmet--how frequently? What type of helmet?
       
      My own answers: (a) Most of the time off-road to get to downed trees, cut the trees to logs and haul the logs back for splitting. (b) Very rarely, a ski helmet and not a motorcycle helmet.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...