Quantcast
Jump to content


Recommended Posts

Posted

20100501_2 pictures from current events photos on webshots2211942020104110397HtwyRM_th.jpg

Went and looked at a friends Trooper Trailer and took a bunch of photos. Pretty neat I thought, guestimated weight is 300 to 400 pounds, a lot less than a trailer. I figure my trailer probably weighs as much as my Trooper or more. Also got a few photos of how he did his heater.

Kinarfi

That looks pretty good... Judging by the location of his speakers he doesn't encounter alot of water or mud very often

Posted

That looks pretty good... Judging by the location of his speakers he doesn't encounter alot of water or mud very often

Probably not, we live up here in the desert (Utah) and are members of the baby boomer generation, such that we don't enjoy cleaning that much. Now sand, that's a different story! I do get into some water once in a while though. Maybe the speakers are water proof too.

kinarfi

  • 2 weeks later...
Posted

Hi Kinarfi, I assume that's a custom trailer. Do you know if your friend would be willing to share any info on how he put that together? Thanks.

Tried to get enough photos so we could figure it out, He said that he just backs onto it using 4X4 until it stops him, then secures it with the wheel straps and the strap on the side, inserts the tongue into the receiver he welded on & jacks it up high enough to go on the ball. I think he had electric brakes.

Sent him an Email with this thread referenced, asking him if I could pass on his address to you.

Kinarfi

Posted

The guy I bought my trailer off was selling it because he was going to use a A frame to tow his 4x4 behind his Motor Home. Like this one

.

He also had a separate light board that went on the rear of the towed vehicle, you can get magnetic ones, but he was going to get an auto sparky to tap into the excising lights on the 4x4. These are road legal over here but might not be for you. I would not tow my Trooper with this set-up with the stock tires, only road tires and if I remembered correctly, he said that he stopped every 200 - 250 km/h and started his towed 4x4 to lube the gearbox. One bonus is the Trooper and Renegade odometers are digital so wont increase the mileage

Cheers Mike.

Posted

This is a similar setup Tow Trucks use with dolley wheels on one end and winching up the other end of the vehicle. The dolley wheels have been around for years and there are a few manufactures in Tow Operator Magazines, tho these appear to be homemade. Another is called a T - trailer with a similar setup in the rear and a single long rod/pole up the center to attach to the hitch on the tow vehicle. Usally a set point on the pole/rod to maintain the non-dolly end in place. This use to be used by many early dune buggiers.

rocmoc n AZ/Mexico

Posted

Hi Kinarfi, I assume that's a custom trailer. Do you know if your friend would be willing to share any info on how he put that together? Thanks.

I emailed him but got no response. Sorry, after I looked at my photos, I realized that you back on to it and the front comes up and hits the frame of the trooper, thus the rollers on the front, and you keep backing up so the weight is on the trailer wheels and the tongue is at the proper weight. I put my trooper on the trailer so I only have about 100# tongue weight. I first figured two smaller axles with the rear wheels sitting between them, like the tow trucks do, but when I thought about how much weight that would put on the tongue, and went back and did some studying of my photos.

Decided to stay with the trailer I have. Already have it and I don't have to build any thing. But if I didn't have one, I'd consider something like this because my trailer probably weighs as much as the trooper, so I have that much weight to tow around.

kinarfi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Homeowner A
      I have a Coleman UTV 400 and looking for something to store it in.  Preferably something vinyl or plastic with its own base that can stand alone outside and house the UTV.  I think the dimensions of the UT400 are around 106" long 52" wide and 74" tall. 
      What should I consider that won't break the bank?    
    • By Nutcase
      I have a Joyner Trooper 1100 4 place that has been sitting for a number of years. I have everything taken care of but i can't get the fuel through the injectors. Fuel pump puts full pressure on them but they don't turn on or spray fuel. Any ideas?
    • By Dennis
      I have  a bulldog i bought from home depot in 2013.  In the last season it started refusing to shift from neutral to either forward or reverse.  I changed the trans axle fluid and made sure the cables were lubricated and free.  With a lot of coaxing, I can sometimes get it to shift.  once I start driving it, things improve until I let it set awhile.   Any suggestion on where to go from here?
    • By Venom
      Hi All,
      I picked up an old beat up 2010 American Sportworks Bull Dog 300 BD300.  I would like to restore her...  Does anyone know a good source for parts other than the OEM?  I find $130 for brake pads is kind of unreasonable... I also need a steering rack and other things... I took apart the steering rack and it needs a new bearing and oil seal... Of course the OEM only sells the complete rack for over $200..  I found the correct bearing for $6.00. I am having trouble finding the correct oil seal.. 
      Anyone that has info on one of these machines, please chime in...  I am used to the ease of finding info on Polaris, Honda, Can Am, Kawasaki, etc.....,  Info and parts on these seems to be scarce..  Some of the parts on it look like Golf Cart parts as well as some look like Go Kart parts..
       

    • By shawn b
      my hisun died on me while driving it started losing power then stalled. it wants to start but wont . it didn't over heat. I replaced plug,fuel filter injector, and fuel pump.put code reader on it and says no codes. have any ideas possibly sensor? Any input on what it could be would be appreciated
×
×
  • Create New...