Quantcast
Jump to content


How to wire winch remote on Hisun Sector E1 ?

hdtran
 Share

Recommended Posts

hdtran Apprentice

hdtran

Posted
Posted

It's not immediately obvious to me how to wire a remote control (wired or wireless) on the Sector E1.

Has anyone here done this? Do you have pictures on how to get to the wiring?

Thanks!

ibike Apprentice

ibike

Posted
Posted

There’s a YouTube video “Tony’s Tractors “ that has a video showing him wiring up a remote on his Bighorn 550. It’ll be practically the same or at least get you in the ballpark. 

hdtran Apprentice

hdtran

Posted
  • Author
Posted

Well, it looks like there is a winch remote receiver mounted under the front hood.

I just contacted the dealer to ask them if they forgot to give me the winch remote transmitter, or if that's an upcharge. I'll update when I hear from them.

 

 

20240513_124950.jpg

20240513_125131.jpg

  • 2 weeks later...
hdtran Apprentice

hdtran

Posted
  • Author
Posted

Update: my dealer found the remote. Serial number matches the receiver module. I've picked up the remote but haven't tested yet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Ductking1
      2024 Hisun Sector 550 gear sector binding
      By Ductking1
      I recently purchased a 2024 Hisun 550 Sector from Kreps Service Station and am having issues with the gear selector, I am doing as instructed in the owners manual but the shifter acts like it is binding or the button lock isn't releasing, the shifter will not move, I have to wiggle it back and forth while pushing hard on the brake and if it's in park or reverse it's nearly impossible to get it to move, I contacted Justin Krep and he says this is normal with these machines, I find that hard to believe, I've owned many utvs and side x sides and have never had this kind of issue with any of them, any help with this problem would be greatly appreciated.
    • SouthernGypsy
      Help needed, Anyone recognize where this Internally Threaded Bolt belongs?
      By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • se3388
      Anyone else with a UT10X?
      By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • A P
      2022 Hisun Sector 550 eps. Power steering not working
      By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • mark walkom
      sector e1 regen has stopped (mostly) working
      By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...