Quantcast
Jump to content


Recommended Posts

Posted

It's called werk-aah-haul-lick desease. No cure, can be terminal and detramental to relationships.

Lenny

Only detrimental when only one has it. In our case both have it so it is compatible. On a side note. You know we like to find things at thrift shops. I found the prize. A Saidhead 2008 Watkins Glen green tie-dye t-shirt with bushy headed Saidhead skulls. Roc washed it and I have wore it for two days! It is so coooool!

rocmoc n AZ/Mexico

  • Replies 34
  • Created
  • Last Reply

Top Posters In This Topic

Posted

She is back together. Very very quiet and I am very pleased. I only lowered 1 3/4" - 2". I could have lowered another 1" - 1 1/2" but not worth the extra work. I would have had to cut the hitch brace off and relocate. Only thing remaining is reinstalling the muffler (10 minutes), skid plate ( 30 minutes) and a few miscellaneous things (15 minutes). It does seem to be smoother but could be the power of suggestion, I wanted it to be quieter. This is the end of this STORY!

rocmoc n AZ/Baja

Guest Lenny
Posted

She is back together. Very very quiet and I am very pleased. I only lowered 1 3/4" - 2". I could have lowered another 1" - 1 1/2" but not worth the extra work. I would have had to cut the hitch brace off and relocate. Only thing remaining is reinstalling the muffler (10 minutes), skid plate ( 30 minutes) and a few miscellaneous things (15 minutes). It does seem to be smoother but could be the power of suggestion, I wanted it to be quieter. This is the end of this STORY!

rocmoc n AZ/Baja

And Rocmoc lived happly ever after. THE END

Lenny

Posted

I lied, I'm back!

Went for a drive down the frontage road next to the freeway today. At 60 mph it was GREAT! I had not put the skid plate under the motor on and thought maybe I will leave it off. I have never had one on any of my Jeeps or sand buggies in that location. WELL, I looked at the skid plate to see if it had been used in past adventures. The thing has huge deep marks from encounters with rocks. Guess it is going back on. I had to top off the Trans gear oil but decided Royal Purple was too expensive and went with Castro Syn. Gear Oil (Half the Price). She is washed and boy was she dusty. I have to apologize to everyone who came to Farmington. I looked for some where with good terrain & cool temps. Over looked if it would be dry for months before resulting in DUST! Sorry about that! Well we are taking her to Baja or Yuma / Palm Springs this winter. Maybe we will see someone there! In the mean time We are back in our hills here at home. The monsoons have started and the DUST is gone. Have fun!

rocmoc n AZ/Baja

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Homeowner A
      I was randomly and briefly able to connect to my Coleman UTV 400s ECU the other day twice and haven't been able to since.  When I was able to access it, I found the following codes and wondered if anyone may know where I should start or what I should look at?  
      P0031 - O2 Sensor Heater Control Voltage Low
      P0107 - Manifold Absolute Pressure/Barometer Pressure Voltage Low
      P0113 - Intake Air Temperature Sensor Voltage High
      P0118 - Engine Coolant Temperature Sensor Voltage High
      P0650 - Malfunction Indicator Lamp (MIL) failure
       
    • By Marie
      Hello, we recently got a 2013 Hisun 800 as a little project for my husband and I to work on. Turns out the guys before us loved the mud anyway. We have replaced the stator and now going to do the Rectifier but here is the hold up as seen in the picture. There are tons of wires going to the battery. I cant seem to find anything that shows what wires should, or shouldn't be attached to the battery or where these 2 plugs go. if someone would please take some pics or share knowledge to where they go I would appreciate it greatly.
    • By Grant
      I recently bought an axis 500 and it’s missing a box or something the plug is L shaped I’ve looked through the wiring diagrams and still can’t figure it out. The plug is located right near the battery housing 

    • By CYJSP2009
      Dear Friends, 
      2022 Brand new Joyner CV Axles and CV  Joint rebuild kits are comming 
      1.  S650.03.02.02.00 ---Joyner 650 Commando Rear
      2. TR1100.03.01.03.00 --- Joyner Trooper Front 
      3. TR1100.03.02.03.00 --- Joyner Trooper Rear
      4. D650.03.02.02.00 --- Joyner 650 Sand Spider Rear Left 
      5. D650.03.02.03.00--- Joyner 650 Sand Spider Rear Right 
      6. SV800.03.02.01.00 --- Joyner 800 Viper, SV1100 Drive shaft Left
      7.  14274 --- 650 ider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      8. 15803  ---  650 Sand Spider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      Attached are the part photos for reference. 
      Above parts are now on the way to USA, will be ready for inland delivery in middle of July. 
      Price: CV Axle: USD250/ Piece;  CV Joint kit (without grease): USD110  send to door. 
      There will be special discount availabe for deals completed within July 2022.  
      Buy 1 piece: Get 5% discount, 
      Buy 2 pieces: get 10% discount.
      Buy 3 pieces: get 15% discount, 
      Buy 4 and more than 4 pieces: get 20% discount. 
      Please kindly note Qty for each part is not big  and it is hard to forcast when there will be next offer for these kind of products unless there is sufficient confirmed order qty for productioin arrangement. 
      Payment method: Payoneer payment link ( can pay through bank account or credit card) or Paypal ( [email protected]) .  Payment commission paid by the buyer. 
      Interested parties, please contact [email protected]
      Thanks
      Good Luck
      Casey / Leaf Asia
      July-07-2022
       
       
       














    • By Frank Mac67
      My Axis 500 has been operating properly for almost a year with Zero problems. While I was away my granddaughter & friends were riding & playing in the snow. They went to the gas station to fill the tank & the vehicle would not start afterwards. I BEEN GIVING MULTIPLE STORIES: The ATV will not start. When I turn the key I can hear the fuel pump come on but nothing happens other than that. 
      - NO CLICK - NO OTHER NOISE
      *I CHECKED THE BATTERY 12.43volts
      *I replaced the solenoid inside the battery compartment. 
      Seems the next electrical component in line has battery connections IN & motor connections OUT with 2 other small wires connectedaswell(I do not know the name of this component).
      Can anyone help?
      I can not find an ordered list of electronic components starting at the battery.
      Can anyone help with this?
      Thanks in advance for any help.
       



×
×
  • Create New...