Quantcast
Jump to content


Gaskets - Reusable??

Kinarfi

By Kinarfi
in Joyner UTV SxS Forum

 Share

Recommended Posts

brostar Proficient

brostar

Posted
Posted

As far as I understand silicone is fine for everything except direct contact with gas, regardless I've used silicone on a 350 rocker cover with no problems before and it was RTV Silicone. I just found the old tube and the specs are, resists aging, temp range is -50C to 205C water, oil, grease and vibration. Jeff, RTV Silicone for your valve cover will be as sweet as Nanas nuts or I am a Polaris fan.

Cheers Mike.

Link to comment
Share on other sites
Kinarfi Veteran

Kinarfi

Posted
  • Author
Posted

As far as I understand silicone is fine for everything except direct contact with gas, regardless I've used silicone on a 350 rocker cover with no problems before and it was RTV Silicone. I just found the old tube and the specs are, resists aging, temp range is -50C to 205C water, oil, grease and vibration. Jeff, RTV Silicone for your valve cover will be as sweet as Nanas nuts or I am a Polaris fan.

Cheers Mike.

RTV Silicone for your valve cover will be as sweet as Nanas nuts or I am a Polaris fan.

HUH????

Thanks,

Kinarfi

Link to comment
Share on other sites
brostar Proficient

brostar

Posted
Posted

Sorry Jeff, my Kiwi slang is getting the better of me again. That roughly means in the old days, "my Grandma grows the best fruit, veggies and nuts known to man". Used in language today translates to, it will be fine".

So RTV Silicone would be OK to use on your valve cover.

Cheers Mike

Link to comment
Share on other sites
Guest Lenny

Guest Lenny

Posted
Posted

Sorry Jeff, my Kiwi slang is getting the better of me again. That roughly means in the old days, "my Grandma grows the best fruit, veggies and nuts known to man". Used in language today translates to, it will be fine".

So RTV Silicone would be OK to use on your valve cover.

Cheers Mike

Any sealants you use that is in contact with gas including intake manifold areas and motor oil for that matter should be Oxygen sensor safe. Problem is that when certain chemicals in the other sealants burn, the residule can greatly shorten the life of your Oxygen sensors. Oxygen sensor safe sealants will say that on the front of the tube. Darn and I really liked that Permatex Motorcycle sealant too.

Lenny

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • Eagle Mountain Outfitters
      NEW Rear Foldable Cargo Basket designed specifically for the Mule
      By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • joynersfuntillitbreaks
      please help im new to joyner
      By joynersfuntillitbreaks
      so i just picked up a 2008 1100 trooper and iv ordered a few parts for it now and 99% of what i got fits perfect my issue now is my rear wheel hub is stripped out got a new cv and it fits great but i order 2 different hubs from 2 different places now and they are both wrong the spline opening is to small to fit the factory cv shaft and yes the shaft factory part #s are the same paid 250 for an original new replacement if anyone has anything that works to replace the original hub please point me in the right direction 
    • Clayton Walker
      Im New here but just got my Uforce Fitted for Hunting Season
      By Clayton Walker
    • Kingfish
      Now that I have done the LI-Ion batt conversion, I need to do something about the suspension
      By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...