Quantcast
Jump to content


Recommended Posts

Posted

Most of these are from the liquidation sale at the old TJUSA Warehouse, never the less they are parts of interest.

Cab HEATER Joyner Trooper T2 or T4 Cab BRAND NEW Cab HEATER Joyner Trooper T2 or T4 Cab BRAND NEW: eBay Motors (item 260635418829 end time Aug-13-10 09:47:32 PDT) I'm thing about 4x4x454 and Kinarfi here.

Joyner T2-Trooper Camo Enclosure- NEW! Joyner T2-Trooper Camo Enclosure- NEW!: eBay Motors (item 190416275583 end time Aug-08-10 17:41:55 PDT) I could get the hardware and canvas doors to go with this if someone was keen on it.

Joyner 1100cc Chery engine ECU Joyner 1100cc chery engine ECU: eBay Motors (item 260613092811 end time Jul-31-10 16:01:12 PDT) A bit pricy but if you have a drowned rat & your ECU has failed that's the price you have to pay.

NEW JOYNER UTV T2 TROOPER HARD PLASTIC ROOF CAMO NEW JOYNER UTV T2 TROOPER HARD PLASTIC ROOF CAMO: eBay Motors (item 160448836693 end time Jul-24-10 15:42:25 PDT)

Chery B11-3407010BA Power Steering Pump Joyner Chery B11-3407010BA Power Steering Pump Joyner ATV more: eBay Motors (item 200498074761 end time Jul-29-10 09:25:28 PDT) Check out the price. I can't find a matching part number at this stage, but could find out.

Joyner Chery Power Steering Reservoir B11-3408010 Joyner Chery Power Steering Reservoir B11-3408010: eBay Motors (item 290450451044 end time Jul-31-10 15:17:51 PDT) This is the stock part like above.

1600cc CHERY 4 Cylinder ENGINE Joyner Sand Viper 1600cc CHERY 4 Cylinder ENGINE Joyner Sand Viper: eBay Motors (item 200495590187 end time Aug-12-10 13:25:24 PDT) Didn't Lenny get one of these? Anyway Kinarfi, this puppy has your name on it.

Cheers Mike.

Posted

Most of these are from the liquidation sale at the old TJUSA Warehouse, never the less they are parts of interest.

1600cc CHERY 4 Cylinder ENGINE Joyner Sand Viper 1600cc CHERY 4 Cylinder ENGINE Joyner Sand Viper: eBay Motors (item 200495590187 end time Aug-12-10 13:25:24 PDT) Didn't Lenny get one of these? Anyway Kinarfi, this puppy has your name on it.

Cheers Mike.

Did you see who was selling it? he live in the same place as Lenny, oh it is Lenny!! :lol:

Do you think it will fit and bolt up easily?

Thanks, Kinarfi

Guest Lenny
Posted

Did you see who was selling it? he live in the same place as Lenny, oh it is Lenny!! :lol:

Do you think it will fit and bolt up easily?

Thanks, Kinarfi

No it won't fit or bolt right up. It takes a different transmission and a lot of modifing. I had considered putting it in my Trooper. Still might if it doesn't sell.

Lenny

Posted

No it won't fit or bolt right up. It takes a different transmission and a lot of modifing. I had considered putting it in my Trooper. Still might if it doesn't sell.

Lenny

I know what will slip right in. Joyner's new Renegade Tubro Diesel engine. Lenny and Kinarfi, what about the Power Steering Pump?

Cheers Mike.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • By Frank in MI
      Thanks for accepting me!
      Haven't got a side by side yet, but have been shopping.   
      Any advice welcome & I am on a limited budget, so haven't decided yet on new or used.
       
    • By Greg Kilgore
      Last year bought a small universal coolant style cab heater. Well I installed it today. Thanks to another member, RangeRider45, and his install
       
      That told in his post the size fitting he used. I got the same fittings plus a few others. And all went kinda smooth. Took a few minutes to get air purged from coolant system. Should have parked on hill with front up in the air. But would have had a hard time working on it.
      I had a variable power switch connected to an overhead cab fan. Never really used the fan that much. And I have to remove the fan to put on my cab enclosure anyway. So I repurposed the switch to supply power for the heater. The heater has 2 12-volt DC computer fans that are rated for 1.8 amps each. So it's not going to be a big drain on the weak charging system. And with the switch I've got great control over the speed of the fans.
      If anyone is interested the radiator hoses are 7/8 inch. I reworked the temperature sending unit (moved it closer to radiator) to make room for all the extra plumbing I did to get the heater to work the way I wanted. 
      Plumbing parts list.
      10-15 worm water clamps. 3/4 to 1 1/4 inch size.
      2 1" x 3/4" x 1" PEX Tee
      1 3/4" PEX ball valve
      1 1" PEX ball valve
      5/8" heater hose. I got 6' and probably have 4' left over.
      I used the radiator house I cut out to use as splices between the PEX fittings. The PEX fittings are not true to their dimensions that are stated on the package. So they fit the 5/8" and 7/8" very nicely.
      They way I have it plumbed is from radiation out side. A tee, then the 1" ball valve, then a Tee. Coming off the Tees are the hoses going to the heater core. There is a 3/4" ball valve on one of the Tees. The ball valves are used to bypass the heater core in the summer. Or direct the hot coolant through the heater core in winter. The temperature sending unit tells me how hot the coolant is. And if anything is getting too hot. The dash also has an idiot light that comes on if the head gets too hot. But doesn't do anything if the radiator gets too hot. There is a temp sensor on the radiator that controls the electrical fan. But if the coolant isn't circulating. That switch never sends a signal to turn on the fan. But enough talking/rambling. Everyone wants to see pics. The only thing I need to change is the orientation of the handle on the 1" ball valve. I have 2" or more clearance between the handle and the tire when cut hard right. But I still don't like it. And instead of taking the valve out and rotating 180°. I'm just going to take the nut off and rotate the handle 180°. Think I need to make a locking mechanism to lock the handles in place so they don't vibrate closed when the machine is moving.
      The temperature sending unit and housing. Size 22 mm. Aluminum from Amazon.

      Upper Tee the lower Tee is identical. Can also see the handle of the 3/4" ball valve on the 5/8" hose going to the heater.

      The 1" ball valve. Goes between the 2 Tees

      Wide view of the plumbing.

      The heater installed in the sxs. The 3 black hoses are just hanging there. Zip ties to the heater but not attached to any thing. Will probably just direct 2 toward the wife's feet. And 1 toward mine. Or what ever is need as the heat is needed on rides. The black hose in passenger floorboard is some 1" hose that is not needed. Don't know what I'll do with it.

       
      I think if I was going to do it again. I'd put some Indian Head gasket dressing or silicone on the 1" side of the PEX fittings. And I may still do that. But I really hate the ideal of introducing air back in the coolant system.
       
      Any questions just ask. It may take a while to answer. But I'll try.
      Ya be good and stay warm over the next few months 
       
      Kilgore.
    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
×
×
  • Create New...