Totally Custom Street Legal Joyner SOLD
-
Similar Topics
-
By inkjunkie61
Is there a trick to keeping the timing chain on the bottom sprocket while trying to install cam sprocket? this thing is killing me....thanks
-
By mayorOFsalem
If anyone has any parts for sell Please list here by REPLY.
I would like to see this RZR forum get moving a bit.Its worth a shot.
-
By Dan Jumper
Does anyone happen to know if the wires in the glove box are for a trickle charger? Black/red wire with connector at the end, normally to connect a charger but just wanted any input. Don't want to fry anything.
-
By ILFarmer
Submitted for your approval, my 2009 Joyner T2 1100. I'm only selling it because I recently purchased a Kawasaki Teryx, and the Mrs says one has got to go. I was the 3rd owner I believe. It is definitely used, but I have tried to maintain it to the best of my abilities. I would say it is in fair shape for the years and the miles. The thing runs and sounds great. It always turns heads at every group ride I've ever been on. It has 30" maxxis zilla tires all the way around, except for the spare, fairly new wheel bearings all the way around, and a fuel controller from SilverBullet so you don't have to worry about the O2 sensors or any of that nonsense. Any questions please feel free to DM me here. I know this is a new account. I hadn't been on the boards for a couple years and cant seem to recover my old login. I used to go by ILFarmerT2 and got a lot of good info from the joyner board. I am hoping to get $3000 for this rig. Machine is located in East Central Illinois. Thank you.
-
By Doc Holland
I noticed the battery post was melted when the pug wouldn't start... With the pug off, just placing the cable back onto the battery creates tremendous Heat with in 5 seconds or so... I had just taken off all the connections and clean them with a wire brush just a few months back...Including battery cables and wires for the starter solenoid.
Could this only be a short or bad connection or is there something else?..could the cells of the battery be doing this or maybe the rectifier/regulator? The rectifier from visual inspection doesn't seem to be melted or discolored!
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.