Quantcast
Jump to content


08 joyner T2 won't start

SethZ28

By SethZ28
in Joyner UTV SxS Forum

 Share

Recommended Posts

SethZ28 Rookie

SethZ28

Posted
Posted

Hello everybody, Im new the forum actually it's my 1st post. I just recently purchased a used 08 trooper at the local bank. It has 535 miles and its camo. That had it as a repo, everything seems to be in really good shape. There's just 1 problem it won't run. They said it needed a ECU I purchased a ECU still nothing. All the lights work, 4 wheeldrive works, horn works, and everything else up front. The engine will crank but wont start no fuel or spark, fuel pump won't even run and the fan will not come on. Crossed over the relays to turn fans on fuel pump and get spark. Still nothing, I would really appreciate any good advise on which direction to go next.

Thanks Seth

Link to comment
Share on other sites
Kinarfi Veteran

Kinarfi

Posted
Posted

Hello everybody, Im new the forum actually it's my 1st post. I just recently purchased a used 08 trooper at the local bank. It has 535 miles and its camo. That had it as a repo, everything seems to be in really good shape. There's just 1 problem it won't run. They said it needed a ECU I purchased a ECU still nothing. All the lights work, 4 wheeldrive works, horn works, and everything else up front. The engine will crank but wont start no fuel or spark, fuel pump won't even run and the fan will not come on. Crossed over the relays to turn fans on fuel pump and get spark. Still nothing, I would really appreciate any good advise on which direction to go next.

Thanks Seth

There are some down loads of schematics and wiring diagrams available in the part & pieces thread pinned to the first several posts that may help your figure out you problem. Also if you fill out the information about yourself so we can all get to know you a little better, you may find one of us live just around the corner and can help.

Hope this will help some,

Kinarfi

Link to comment
Share on other sites
SethZ28 Rookie

SethZ28

Posted
  • Author
Posted

There are some down loads of schematics and wiring diagrams available in the part & pieces thread pinned to the first several posts that may help your figure out you problem. Also if you fill out the information about yourself so we can all get to know you a little better, you may find one of us live just around the corner and can help.

Hope this will help some,

Kinarfi

Thanks, I down loaded the schematics. I work out of town so I haven't got back yet to check it out. I updated my profile

Link to comment
Share on other sites
ricksrb Mentor

ricksrb

Posted
Posted

Hello everybody, Im new the forum actually it's my 1st post. I just recently purchased a used 08 trooper at the local bank. It has 535 miles and its camo. That had it as a repo, everything seems to be in really good shape. There's just 1 problem it won't run. They said it needed a ECU I purchased a ECU still nothing. All the lights work, 4 wheeldrive works, horn works, and everything else up front. The engine will crank but wont start no fuel or spark, fuel pump won't even run and the fan will not come on. Crossed over the relays to turn fans on fuel pump and get spark. Still nothing, I would really appreciate any good advise on which direction to go next.

Thanks Seth

I assume since you say your getting spark you confirmed that at the plugs,If so have you confirmed your getting fuel to the fuel rail? possible the pump now works but maybe no fuel going through the regulator.Also check fuses and key switch since both fan and fuel pump should come on when key is turned to on position.I know we have at least one other member in Ky,I went to elementry school in Florence Ky and Ryland Heights Ky.Way to many years ago.

Link to comment
Share on other sites
SethZ28 Rookie

SethZ28

Posted
  • Author
Posted

I assume since you say your getting spark you confirmed that at the plugs,If so have you confirmed your getting fuel to the fuel rail? possible the pump now works but maybe no fuel going through the regulator.Also check fuses and key switch since both fan and fuel pump should come on when key is turned to on position.I know we have at least one other member in Ky,I went to elementry school in Florence Ky and Ryland Heights Ky.Way to many years ago.

Yes I checked fire at the plugs, I took a plug out and u could smell a little fuel on it. I checked all fuses in both boxes. There isn't a Inline fuse somewhere I might have overlooked is there? I could only get the pump and fan on when I put jumpers on the rely. I went to elementry at Edison in Catlettsburg.

Link to comment
Share on other sites
ricksrb Mentor

ricksrb

Posted
Posted

Yes I checked fire at the plugs, I took a plug out and u could smell a little fuel on it. I checked all fuses in both boxes. There isn't a Inline fuse somewhere I might have overlooked is there? I could only get the pump and fan on when I put jumpers on the rely. I went to elementry at Edison in Catlettsburg.

I dont know of any inline fuse,could be.I do know there has been problems with the fuses themselves.If you havnt done so pull each fuse and put it back in,I have heard of some people that have had to do that because of the cheap fuses and bad connections..Was it running when you bought it or did the bank tell you the ecu was to cause of it not starting? There are many more members here that will give you more and Im sure better advise then me so dont give up.

Link to comment
Share on other sites
SethZ28 Rookie

SethZ28

Posted
  • Author
Posted

I dont know of any inline fuse,could be.I do know there has been problems with the fuses themselves.If you havnt done so pull each fuse and put it back in,I have heard of some people that have had to do that because of the cheap fuses and bad connections..Was it running when you bought it or did the bank tell you the ecu was to cause of it not starting? There are many more members here that will give you more and Im sure better advise then me so dont give up.

It wasn' t running when I bought it. They had it next door at a little car lot. The mechanic is the one that told me. Which I checked also before I purchased 1. It gets power to the computer, Nothing coming out. I pulled all the fuses and checked them and then put them back. I checked the relays also. It's weird I put the jumpers in and everything works. Then put the relays back in and nothing. They don't have a roll over sensor do they? My bike has one, I wrecked it and it came on. It wouldn't let u start it. Don't know if it has 1 but that's kind of how it acts.

Link to comment
Share on other sites
  • 8 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Clayton Walker
      Im New here but just got my Uforce Fitted for Hunting Season
      By Clayton Walker
    • Browner010
      2022 Coleman outfitter 500 had a loud snap then a metallic grinding noise
      By Browner010
      Recently I had an overheating issue on my 2022 Coleman Outfitter 550 (Hisun UT550) and to check to make sure it was fixed I took it out for a ride around the block. After a couple cycles on the LED coolant meter, I took it for a couple mile ride and on my way back I heard a loud metallic snap then a grinding noise. It was still able to move under its own power but very slowly. I was about 2 blocks from the truck so 'I limped it home and up onto the trailer. I know I need to tear it apart and look for what broke, but anyone have a guess as to where to start? I'm seriously getting tired of this damn machine! 750 miles on it and already replaced the belt, wet clutch, primary clutch, clutch roller weights among a few other things. Seriously, this friggin machine has spent more time on the lift than on the road. I thought I bought this new because it was from the owner of a tractor supply, but he registered it under the stores name making me the 2nd owner voiding any and all warranties.
      Any Ideas what to look for would be appreciated.
      Thanks
    • WCF
      New long travel for the 1100 sand viper
      By WCF
      Hi Joyner Gang
      New to the Joyner group. I'm making long travel for the 1100 Sand viper. I'm trying to make something that will work as well or even better than the RZR Rino etc. At this time the front has 14" travel rear has 16" of travel. Still developing the suspension. comets are welcome. Ask questions and I will get back to the Forum 
       
      ?
       
       

       
       

       


    • Paul Angstadt
      Hi y'all. New to this stuff. in Florida.
      By Paul Angstadt
      Hi everybody. I just bought a 2012 Hisun with the 700cc engine. Was wondering where i could find a service manual for this thing?
      Its going to need some parts that are missing, like the air intake hoses and other things. Also the dash display is out. the only light that works is neutral light. Not even sure on the model. from pics I've seen, it looks like an HS700. Kind of grey with the black stripes on the hood. Just hoping i can find parts for it.
      Thank you for any advice you can give me. By the way, it does run and goes forward and reverse.
      Paul
    • KidColeman
      New 2020 Coleman Outfitter UT400 Owner with questions
      By KidColeman
      Hi All,
      Just picked  up a 2020 UT400 that my 80 year old father will be driving around the farm.  We purchased the machine with a few "issues" and they lowered the price accordingly.  Small stuff like passenger size mirror and back reflector was torn off by a Tractor supply employee, which we will order replacements for.  Also after further inspection, whoever assembled it did not put a few bolts in the rollcage and aren't in the glovebox, so will be having to order those also.
      Anyway, there are two initial things on the UT400 I'm not sure what they are or for.  The first, there is a square white electrical connector with about 8 pins hanging form under the middle of the back bed - I don't see another one to match up or plug into it, so wondering if this is pre installed optional connection for like towing around a sprayer?  Anyone know what this is?  Also, there is a 10 inch black rubber hose that is zip tied to the back A frame on the passenger side.  I watched the assembly video and it doesn't mention one, so don't know what this hose is for - anyone know?
      Also, has anyone come up with a "fix" or work around for having to have the seatbelts plugged in or even in place?  We aren't planning on using them and are figuring just plugging them in and wedging them behind the seats - didn't know if there is a way to just disconnect the "over 10mph gas starving" safety sensor.
      Looking forward to seeing how this machine does for my father.   I'm thinking about installing a suicide knob on it for easier turning for him, as it's a little stiff (compared to our Kawasaki Mule).  Maybe with use it will loosen up some?
      Thanks!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...