Quantcast
Jump to content


Recommended Posts

Posted

Hello everybody, Im new the forum actually it's my 1st post. I just recently purchased a used 08 trooper at the local bank. It has 535 miles and its camo. That had it as a repo, everything seems to be in really good shape. There's just 1 problem it won't run. They said it needed a ECU I purchased a ECU still nothing. All the lights work, 4 wheeldrive works, horn works, and everything else up front. The engine will crank but wont start no fuel or spark, fuel pump won't even run and the fan will not come on. Crossed over the relays to turn fans on fuel pump and get spark. Still nothing, I would really appreciate any good advise on which direction to go next.

Thanks Seth

Posted

Hello everybody, Im new the forum actually it's my 1st post. I just recently purchased a used 08 trooper at the local bank. It has 535 miles and its camo. That had it as a repo, everything seems to be in really good shape. There's just 1 problem it won't run. They said it needed a ECU I purchased a ECU still nothing. All the lights work, 4 wheeldrive works, horn works, and everything else up front. The engine will crank but wont start no fuel or spark, fuel pump won't even run and the fan will not come on. Crossed over the relays to turn fans on fuel pump and get spark. Still nothing, I would really appreciate any good advise on which direction to go next.

Thanks Seth

There are some down loads of schematics and wiring diagrams available in the part & pieces thread pinned to the first several posts that may help your figure out you problem. Also if you fill out the information about yourself so we can all get to know you a little better, you may find one of us live just around the corner and can help.

Hope this will help some,

Kinarfi

Posted

There are some down loads of schematics and wiring diagrams available in the part & pieces thread pinned to the first several posts that may help your figure out you problem. Also if you fill out the information about yourself so we can all get to know you a little better, you may find one of us live just around the corner and can help.

Hope this will help some,

Kinarfi

Thanks, I down loaded the schematics. I work out of town so I haven't got back yet to check it out. I updated my profile

Posted

Hello everybody, Im new the forum actually it's my 1st post. I just recently purchased a used 08 trooper at the local bank. It has 535 miles and its camo. That had it as a repo, everything seems to be in really good shape. There's just 1 problem it won't run. They said it needed a ECU I purchased a ECU still nothing. All the lights work, 4 wheeldrive works, horn works, and everything else up front. The engine will crank but wont start no fuel or spark, fuel pump won't even run and the fan will not come on. Crossed over the relays to turn fans on fuel pump and get spark. Still nothing, I would really appreciate any good advise on which direction to go next.

Thanks Seth

I assume since you say your getting spark you confirmed that at the plugs,If so have you confirmed your getting fuel to the fuel rail? possible the pump now works but maybe no fuel going through the regulator.Also check fuses and key switch since both fan and fuel pump should come on when key is turned to on position.I know we have at least one other member in Ky,I went to elementry school in Florence Ky and Ryland Heights Ky.Way to many years ago.

Posted

I assume since you say your getting spark you confirmed that at the plugs,If so have you confirmed your getting fuel to the fuel rail? possible the pump now works but maybe no fuel going through the regulator.Also check fuses and key switch since both fan and fuel pump should come on when key is turned to on position.I know we have at least one other member in Ky,I went to elementry school in Florence Ky and Ryland Heights Ky.Way to many years ago.

Yes I checked fire at the plugs, I took a plug out and u could smell a little fuel on it. I checked all fuses in both boxes. There isn't a Inline fuse somewhere I might have overlooked is there? I could only get the pump and fan on when I put jumpers on the rely. I went to elementry at Edison in Catlettsburg.

Posted

Yes I checked fire at the plugs, I took a plug out and u could smell a little fuel on it. I checked all fuses in both boxes. There isn't a Inline fuse somewhere I might have overlooked is there? I could only get the pump and fan on when I put jumpers on the rely. I went to elementry at Edison in Catlettsburg.

I dont know of any inline fuse,could be.I do know there has been problems with the fuses themselves.If you havnt done so pull each fuse and put it back in,I have heard of some people that have had to do that because of the cheap fuses and bad connections..Was it running when you bought it or did the bank tell you the ecu was to cause of it not starting? There are many more members here that will give you more and Im sure better advise then me so dont give up.

Posted

I dont know of any inline fuse,could be.I do know there has been problems with the fuses themselves.If you havnt done so pull each fuse and put it back in,I have heard of some people that have had to do that because of the cheap fuses and bad connections..Was it running when you bought it or did the bank tell you the ecu was to cause of it not starting? There are many more members here that will give you more and Im sure better advise then me so dont give up.

It wasn' t running when I bought it. They had it next door at a little car lot. The mechanic is the one that told me. Which I checked also before I purchased 1. It gets power to the computer, Nothing coming out. I pulled all the fuses and checked them and then put them back. I checked the relays also. It's weird I put the jumpers in and everything works. Then put the relays back in and nothing. They don't have a roll over sensor do they? My bike has one, I wrecked it and it came on. It wouldn't let u start it. Don't know if it has 1 but that's kind of how it acts.

Posted

sethz28 I don't know whats wrong with your t2 but when you get it running send me a pm and lets go riding I have a blue t2 I live in Louisville Ky.It will be nice to ride with another joyner owner

Posted

sethz28 I don't know whats wrong with your t2 but when you get it running send me a pm and lets go riding I have a blue t2 I live in Louisville Ky.It will be nice to ride with another joyner owner

Sounds like a plan plumber, do u have very many places to ride there?

Posted

Sounds like a plan plumber, do u have very many places to ride there?

I know a few places we can go there is mountain parkway offroad park it's not to far from you

Posted

I know a few places we can go there is mountain parkway offroad park it's not to far from you

I live fairly close to the parkway. I never knew of a offroad park there.

  • 8 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Frank in MI
      Thanks for accepting me!
      Haven't got a side by side yet, but have been shopping.   
      Any advice welcome & I am on a limited budget, so haven't decided yet on new or used.
       
    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • By Texjpr
      2002 ranger 500 4x4 stopped running and wouldn't restart. Service manual wiring diagram helped identify the hub safety switch as the culprit. Using jumper wires to bypass  switch allowed the engine to start and run normally. Inspection of switch showed melted epoxy and a strong smell of burnt electrical. Unable to find replacement part either used or new. Is there a work around other than jumper wiring?
    • By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
×
×
  • Create New...